Using The Array Copy Toolpath Option in Vectric Software

No video

Using The Array Copy Toolpath Option in Vectric Software

Рет қаралды 9,036

2 жыл бұрын

Using The Array Copy Toolpath Option in Vectric Software
More down here ↓↓↓ Click SHOW MORE!
This video is an answer to a couple of questions I have received about the difference between Array Copying Vectors vs Array Copying Toolpaths in Vectric Cut2D Desktop, Cut2D Pro, VCarve Desktop, VCarve Pro, and Aspire.
In this video, I’ll first demonstrate creating an array copy of two 2D vectors, then demonstrate the Array Copy Toolpaths function with those same vectors to drill the holes for threaded inserts for a spoilboard.
Then I’ll show you how to use the Array Copy Toolpaths option to machine an array of four 3D components from one single component and 2 vectors.
As usual, if you have any comments or questions about anything I covered in this video, please join me for the Live Q&A, or put ‘em in the comment section below.
On Sunday, September 26th, I’ll be hosting a LIVE Q&A session, where you can ask your questions pertaining to anything I’ve covered in this video. That Q&A starts at 3 pm Eastern time, Noon Pacific time. Hope to see you there!
Here’s a link to the Live Q&A: • LIVE Q&A #110 - Using ...
______________________________________________________________________________
If you’d like to support my channel, help fund the shop/shed build, and help with the making of future videos, you can donate by using the following link:
PayPal: paypal.me/Mark...
______________________________________________________________________________
Link to the Vectric for the Absolute Beginner Playlist: • Vectric for the Absolu...
Link to the 3D Modeling for the Absolute Beginner playlist: • 3D Carving for Beginners
Link to the V-Carving for the Absolute Beginner playlist: • V-Carving for the Abso...
______________________________________________________________________________
Get your Official Mark Lindsay CNC T-shirts and coffee mugs here:
marklindsaycnc....
marklindsaycnc.com is sponsored by Harneal Media - a website developing company that specializes in websites for the maker community. Find out more at:
harnealmedia.com/
______________________________________________________________________________
Link to The Trampled Underfoot Podcast, hosted by my friend Eloy Escagedo and I. "Two guys from different decades, backgrounds, and opposite sides of the continent discuss life, the universe, and everything. What's the show about? About an hour..."
KZfaq: / @trampledunderfootpodcast
Facebook Page: / trampledunderfootpodcast
Past Episodes available at our website: trampledunderf...
______________________________________________________________________________
For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at:
www.vectric.com/
______________________________________________________________________________
Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos.
I appreciate your support! You Folks ROCK!
This video is for informational and entertainment purposes only.
#Aspire #VCarve #Vectric #Tutorial

Пікірлер: 36

@butchmiller2451 4 ай бұрын

Array copy toolpaths is advantages when it comes to machining time, especially with the Minimize Tool Changes option selected.

@josephpiccione1653 2 жыл бұрын

You have a God given talent for teaching. Love your lessons.

@martymitchell9855 2 жыл бұрын

Such a great explaination of a somewhat confusing process! Thank you!

@douglasmitchell4063 2 жыл бұрын

Handy function to know how to use. Without knowing this I would have made 2 layers for my spoil board circles. Make one layer, array and group them. Made a second layer, array and group them as well. Then when I create my pocket toolpaths, I could turn on only one layer that i want to create the toolpath for, switch layers then repeat for the second toolpath. Either way works. Thanks for the video!

@stevegronsky8904 2 жыл бұрын

I sure wish I was aware of this when I created my 1st spoilboard using the " T-Nuts " you described. Would have saved LOTS of time and frustration. Thanks Mark, for a very informative video.

@OzarkArtsandCrafts 2 жыл бұрын

Great and, as usual, a useful video. I will be using the array copy toolpath option of the plain array copy from now on. I watch your videos regularly but seldom make comments. Just want add that they all deserve a Star above the regular thumbs up.

@MarkLindsayCNC 2 жыл бұрын

Thank you, Dennis. Both Array Copy options have their place, so I wouldn't completely forsake the Array Copy option for vectors. Just knowing the difference between the two is a big help in deciding which option to use in any specific project.

@RobSandstromDesigns 2 жыл бұрын

Another informative video - appreciate the effort you put into these videos in trying to teach us about how to get the most efficient use of the software. As you said it is a personal preference regarding use of this Array Toolpath Option or the Array Copy option. Since being introduced to the Array Toolpath Option my tendency is to use the Array Toolpath option for several cutouts of the same design or 3d model. This is because of the point you made where you only make adjustments to one design or one model and don't have to go back and do another array copy, etc. etc. After a few of the array copy sessions this can get old, vs. just making the change once and going straight to the toolpath and recalculating.

@Igorfun 2 жыл бұрын

I watched it Mark, great info, Thanks a lot

@adsensebarokah5459 2 жыл бұрын

Thank you, thank you very much for this information

@noorsaidijohannoor7563 2 жыл бұрын

Excellent Mark!

@brooksmartin5183 2 жыл бұрын

Mark great explaination

@cacatitj 2 жыл бұрын

excellent video mark tthank you

@IrfanMehmoodOfficial 2 жыл бұрын

Awesome technique

@mezalick 2 жыл бұрын

Mark, When cutting multiple 3D models and you want to use the Array Copy Toolpath option you can use a smaller Job size which will maximize the pixels in the 3D model. The Array Copy Toolpath does not need the pixels to generate the 3D cutting.

@mezalick 2 жыл бұрын

Image cutting 50 very small 3D models from a large sheet of material. You would be losing pixel quality but using a smaller job size you keep the quality of the components.

@MarkLindsayCNC 2 жыл бұрын

Excellent point, Michael! The smaller material size is one of those things I sometimes forget about when designing. I'll be sure to bring it up in the Live Q&A today.

@russellferriday8191 2 жыл бұрын

You are a star Mark! Array copy toolpath . . Brilliant. did not know it existed. :) What about two sided toolpaths?

@MarkLindsayCNC 2 жыл бұрын

Thank you, Russell! I haven't experimented with this technique and 2-Sided machining yet, so I can't give you a definite answer at this point. It would be an interesting process, and one that could be a challenge - or maybe it's very simple. I won't know until I try.

@borisgutman3457 2 жыл бұрын

Thank you for the video Please can you explain what for "Ramp Plunge Moves "

@MarkLindsayCNC 2 жыл бұрын

I did a video on Ramps that will give you the gist of the subject. kzfaq.info/get/bejne/p9SUq7p0kpPWf2w.html

@upalipremathilake6393 2 жыл бұрын

good

@joedilaura2560 2 жыл бұрын

Mark, Could the array copy tool path be applied to different sheets? Like the star is the video but I need to cut multiples out of different size boards. Could I add sheets that are the size of the boards I have and array copy tool path to the different sheets? Keep the video coming, I learned so much from you already. Thanks

@MarkLindsayCNC 2 жыл бұрын

Thank you, Joe. I've done a little bit of experimenting with sheets, and the short answer is I haven't yet found a way to make it work. I'll get into it further during today's Live Q&A. kzfaq.info/get/bejne/a62FhtOQ0qfDYIU.html

@steverowe2943 2 жыл бұрын

Thank you for making these videos. I am just learning VCarve Pro and have two questions. 1) For the star offset roughing toolpath, it appears that the adjacent stars are very close together and could possibly overlap. Does the software recognize potential interferences between adjacent stars? 2) At around the 27 minute mark, you set the cut depth for the profile cut by formula by subtracting the start depth. I noticed the screen have what appears to be parameters (i.e. - D for starting depth and C for cut depth) and was wondering if you could just enter D in the formula instead of 0.02"?

@MarkLindsayCNC 2 жыл бұрын

Thank you, Steve. Both good questions. 1.) No, the software doesn't automatically recognize potential collisions. That's why it's important to keep the tool diameter in mind while designing, Preview the toolpaths, make any adjustments that are needed, then Preview again if needed. 2.) The short answer is No, only because Start Depth and Cut Depth aren't variables that are built into the calculators. Having said that, one of the presentations during this year's (or maybe it was last year's) Vectric Worldwide Users Group Meeting had a segment on adding certain variables to the calculators. I'll try to find that presentation, and do a little bit of experimenting on my own. If I succeed, I'll certainly do a video on it.

@jw4321 2 жыл бұрын

I have version 11 of Desktop. I don't have all the "buttons" on the right side showing toolpath operations. The closest thing I see is the tile toolpath button. What am i missing?

@MarkLindsayCNC 2 жыл бұрын

After doing a bit more research, it turns out the Array Copy Toolpath function is not available in Cut2D Desktop or VCarve Desktop. It, along with the other functions you're not seeing, are only available in Cut2D Pro, VCarve Pro, and Aspire. I apologize for the confusion.

@PSS_1 Ай бұрын

What if I only needed to make one copy of the toolpath? Is it possible to disable or suppress some copies from such an array?

@m.c.4574 2 жыл бұрын

Is it possable to Array Copy a two sided model? I have a two sided outlet cover, I need to make several copies of. I am using VCarve Pro 10.5 Cannot figure out how to make multiple copies of a two sided model. Thanks,

@MarkLindsayCNC 2 жыл бұрын

I've not yet tried to array copy a two-sided project, but it's on my list. Try posting this question over on the Vectric Support Forum. There are some absolute wizards over there, and I'm sure one of them has done it.

@joem2209 2 жыл бұрын

Rookie question. Why did you offset the vector around the 3D star by .25”? I did not know you need to offset the vectors around a 3D model. What am I missing?

@MarkLindsayCNC 2 жыл бұрын

I offset that vector to show how it was done. You do NOT have to do that. I wanted the bit to cut beyond the boundary of the model by 1/4 of an inch. I could have also used a Boundary Offset of 1/4 inch in my 3D Finishing toolpath. There are many ways to accomplish the same thing within the software.

@mohammadlateef7543 8 ай бұрын

Hi there. please there is 1 problem keep apering appearing when i using cercular copy, it says ( failed to copy data to clipboard ). So how can I go on and finish my job. Thank you so much. Mohammad . Iraq

@dennyleonard1417 2 жыл бұрын

it takes 56 hrs to cut this

@MarkLindsayCNC 2 жыл бұрын

Please remember that this tutorial was meant to demonstrate how to array copy toolpaths only. That's why I never got into machining times in this video. There are a lot of variables involved in carve times. To help reduce carve times, check the Feed Rate and Plunge Rate you have entered for each of the bits you're going to use (using the EDIT button within the toolpath.) The thing to remember is that the CNC will always move at the rate of the slowest axis. In 3D carving, that's almost always the Z axis, because the Z is in almost constant motion. So you can have a feed rate of 200 inches per minute, but if your plunge rate is 30 inches per minute, that how fast the CNC is going to carve. That's why I use a Roughing toolpath - to remove most of the material, with a .030 machining allowance. With about .030 left to machine in the Finishing toolpath, I can set that plunge rate to the same as my feed rate. That single action will give you a huge reduction in machining time.