Vaillant Ecotec Diverter valve change

Рет қаралды 30,271

2 жыл бұрын

DISCLAIMER:
This video is only intended for use by qualified Gas Safe Registered engineers. You must not attempt any work on your boiler if you are not qualified. You must always carry out 26.9 checks upon completion of works on a boiler.

Пікірлер: 70

@macpatel7810 2 жыл бұрын

Another great video CP. Always good to see real life scenarios where it doesn't always go to plan.

@gmtplumbing8559 2 жыл бұрын

Great vid been changing these occasionally for years never new about diverter mid position or purge mode ive made a note for next time, and keeping it real with the struggle you had 💪keep them coming✌

@Razz60 2 жыл бұрын

Love your videos bro thanks for taking your time to making these helpful vids big respect to you

@sudhiradhikari19 2 жыл бұрын

Came across your channel, very helpful, for new guy like me.

@ahmediqbal2828 Жыл бұрын

Thank you for taking the time to make these videos!! Did my first diverter valve change today, myself and this video made it feel like a breeze so thank you bro. Your efforts are hugely appreciated!

@cputilitysolutions Жыл бұрын

Nice one glad it helped!

@GasTraining Жыл бұрын

Are you a new engineer then? How you finding it? Currently doing portfolio, really interesting work.

@ahmediqbal2828 Жыл бұрын

@@GasTraining I am bro yeah, I qualified around 9 months ago in gas . Really enjoying it. Been doing the plumbing for a few years and it all ties in perfectly. I've watched my boss do a few but never actually done much repair work myself but I'm slowly getting the hang of it. Hope your portfolio and exams go well!!

@blipyoung2180 2 жыл бұрын

Cheers mate for another great video.

@stevenjohnson6082 2 жыл бұрын

for reference take copper pipe off first before removing screws also push turbine clip down its easier

@petel5560 5 ай бұрын

Really helpful process tutorial. Best one i have found. Thank you CP Utility.

@cputilitysolutions 5 ай бұрын

Nice one 👍🏾

@gunsey876 2 жыл бұрын

Nice work, I had to do one a few months back, the condense had leaked previously an rotted the bottom screw, made it a right treat 😡

@alanwild5890 10 ай бұрын

Thank for these instructions. Just replaced one using them 🏆

@cputilitysolutions 10 ай бұрын

Nice one 👍🏾

@Smokeblow 2 жыл бұрын

Beautiful😍… nice work too 😳

@mcginn002 2 жыл бұрын

Nice one mate 👍

@Pb09120 2 жыл бұрын

Top man brilliant work

@georgerobinson576 2 жыл бұрын

good job , thanks for showing

@geetee50 Жыл бұрын

Great job , I notice the insulation foam was shot. Normally on these the door foam goes brittle requiring a new door at £200+ due to seal failure so worth checking the burner seal with your analyser if you ever come across this condition of the foam insulation.

@richardjones3112 Жыл бұрын

Great video,well explained,subbed.

@cputilitysolutions Жыл бұрын

Thank you 👍🏽

@user-li8gr8ur8l 4 ай бұрын

Thanks again Chirag.❤ that was another excellent accurate video

@cputilitysolutions 4 ай бұрын

👍🏾

@abualam4418 2 жыл бұрын

Good job mate,

@cezars4155 2 жыл бұрын

good stuff bud'!

@raihankhan5638 2 жыл бұрын

Very useful video

@abchannel3737 2 жыл бұрын

Excellent

@user-ef2gw6df2f 11 ай бұрын

Some helpful tips 👍💪

@cputilitysolutions 11 ай бұрын

Glad to hear it!

@paulrossiter9567 2 жыл бұрын

Good on ya 👌🏻

@dir5155 2 жыл бұрын

Молодец 👍

@dir5155 2 жыл бұрын

Greetings! The display from 242/3-5 can be put on Vaillant 242/3-3??

@allsystemsdownagain9553 Жыл бұрын

Nice.

@stevenjohnson6082 2 жыл бұрын

if you turn boiler power off after draining it will tell you if the water pressure sensor is block, if blocked it will still show pressure ie 0.5 or 0.3

@dinosauraccounts1411 6 ай бұрын

Hi, I’ve changed the diverter valve. But ch-flow pipe getting hot when hot water is on. Another problem after Changing divertor - the hot water working fine - but heating goes one and rapidly heats up and cuts out - radiator symbol flashes. I did do P0 purging. Still no luck. Any help Would be really good.

@snowmansp 2 жыл бұрын

Hi, once this is done do you re test the gas and do flue readings or as it’s only on the wet side you just do Visual checks for leaks

@cputilitysolutions 2 жыл бұрын

Whenever you've removed a case off a boiler you should do your 26.9 checks 👍🏽

@brahimaitoukharaz3039 2 ай бұрын

hello, I have a vaillant ecotec plus vcw 346 3-5 boiler that works with natural gas and I would like to run it with propane gas. Thanks a lot

@lloydm2883 4 ай бұрын

Thanks for this video. Now l know it's a job for a pro.. not me. What would a plumber charge to do this job???

@cputilitysolutions 4 ай бұрын

Labour I charge 150+vat mate 👍🏾

@leeedwards3783 Жыл бұрын

What long length screwdriver set do you have for these. I have one where the screws are shot so i need to drill them out. Anyone any advise on which size drill bit i need to drill out the screws. Thanks. Enjoyed the video

@cputilitysolutions Жыл бұрын

I've got a 300mm bit holder that I use for these screws. I've had them chewed up before too but I've managed to free it by hammering a flat head onto the screw head and then able to tap it anti-clockwise to free it up

@leeedwards3783 Жыл бұрын

@@cputilitysolutions thanks for the reply. Will have a go at tapping a flat head

@SuspiciousPixels Ай бұрын

whats the part number mine has the black top and I want to replace it with the new one. My existing part is DIVERTER VALVE 252457

@parmbansal1 2 жыл бұрын

Hi. Managed to follow your instructions. Thank you. I ended up draining the pump relief valve and now it's dripping outside on the copper pipe, what should I do, any tips what to do please? Thanks in advance

@cputilitysolutions 2 жыл бұрын

Yes - never drain from the PRV! Unless you're planning to change it! There's boilers have 2 drain off points, one on the flow and one on the return. You'll need to either clean and re-seat the PRV or replace it.

@parmbansal1 2 жыл бұрын

@@cputilitysolutions thank you so much for your guidance. I have taken it apart/cleaned the PRV sadly it still drips. I guess the only option is now to replace new one, hope that stops it. Thank you again! Any other tips would be much appreciated.

@richardmoore8439 5 ай бұрын

I can't get the screws out from the back . All my drivers keep slipping as there seriously tight

@cputilitysolutions 5 ай бұрын

Large flathead, tap it fairly hard (within reason) from an angle with a hammer to loosen it off anticlockwise

@johnabiodun5540 2 жыл бұрын

Done the exact same job on the same boiler the other day and when I ran the hot tap nothing happened... No tap symbol on the display nothing! Had to put the old motor back in the new diverter then it worked. Have you ever come across this before?

@cputilitysolutions 2 жыл бұрын

Not come across that before mate, but I've come across a job where I thought it was the diverter as it was passing down heating, changed it and still doing same thing. Ended up being PCB not sending correct voltage to the motor to move it fully back and forth!

@stevenjohnson6082 2 жыл бұрын

if you have right filling tap open no water comes out of hot tap

@johnabiodun5540 2 жыл бұрын

@@stevenjohnson6082 Water was coming out of the tap but the boiler was doing nothing.

@adiivanuta2573 2 жыл бұрын

Hi, my boiler is vaillant vuw 260 . The problem is that if the chimney led flashing more than 90 seconds after it doesn't start, just running the pump forever. Any idea why? Thank you!

@cputilitysolutions 2 жыл бұрын

Hi, this would require a diagnosis whilst in front of the boiler

@adiivanuta2573 2 жыл бұрын

@@cputilitysolutions Thanks :(

@seanmcgee5060 2 жыл бұрын

Take the pump out as well, so much easier

@cputilitysolutions 2 жыл бұрын

Funnily enough this is what I do when I change the complete pump! It's in my other video 👍🏽

@rodknee87 2 жыл бұрын

Have you ever used the cartridge removal tool and just changed that instead of whole unit?

@cputilitysolutions 2 жыл бұрын

I've heard of it but I've never used it myself yet. May give it a try but I've heard mixed reviews about it. Works for some people, but others have said they've been recalled a short while later because it leaks

@seangribbin6329 2 жыл бұрын

@@cputilitysolutions we use them all the time, as long as its installed correctly they are a dream

@leeedwards3783 Жыл бұрын

Interesting. What's the cartridge removal tool.

@1Patchilo 5 ай бұрын

👏

@cputilitysolutions 5 ай бұрын

Thanks 👍🏾

@kapilsammy 2 жыл бұрын

Bro didn't you forgot to take the diverter valve bracket mount screw when you started wiggling it and then said sh$t should come out lol nice video though