Please let me know in the comments down below if you own this product, a similar one or are looking to buy one. I'm curious to know your thoughts.

This video was a lifesaver! That part that you showed...I have been trying for the last hour to figure out what it goes to. I am in the middle of trying to assemble the unit and I was concerned that I had missed a step. I found the same thing you did, that the part didn’t even exist in the manual. Thank you so much for this video. It was such a huge help and a relief to know I did not miss a step. I agree wholeheartedly the manual completely sucks.

I have one. Love it! Fits in my basement, great for all variants of cable rows and pull downs; tricep extensions, cable bicep curls!!!

I’ve had mine for about a month, and I love it. My 17 year old son put it together in about 90 minutes, without much trouble although he did complain a little bit about the instructions. I hired somebody to mount it to the wall. I would recommend using lag bolts and washers. We also used spacers, but that was because I didn’t want to cut into the baseboards. I don’t think we would have had to use them otherwise. We also mounted one screw into the cement floor to keep it from moving sideways. I’ve been able to get fully body workouts with this machine, no problem. In fact, I haven’t touched my dumbbells since I got it. For lat pull downs and cable rows, I just sit on the floor which has been fine since I covered the cement floors with horse stall mats. Obviously, I’d prefer a bench with a knee holder for the lat pull downs, but I haven’t been able to find one. My only complaint so far is that the cables don’t pull perfectly smooth, but it’s not too big of a deal. At some point the plastic wheels and/or cables will need to be replaced, and I’ll upgrade them. I would definitely recommend the BD-62. Easily my best COVID purchase.

I know its been 3 years, so it looks like Valor heard the concerns about the wall brakets not aligning due to garages typically having baseboards or obstructions on the bottom. I see with the new B62s the bottom bracket angles 9 inches up toward wall. Maybe that fixed the problem hopefully. Great video BTW.

what's interesting about this product is that different companies have the exact same thing. they prolly just find the same supplier from china and label it as their own. Good review bro

I JUST BOUGHT ONE! WAITED FOR 6 MONTHS :) SO EXCITED!

I'm thinking of buying two as I'd still be saving a little bit compared to a functional trainer.

I piked up a used Titan fitness version for $100. Biggest problem i see is securing it if don't want drill wall into a finished drywall. I'm thinking getting posts and pvc pipe and outing weights in it, it wood and strapping it to other equipment.

Nice review, very helpful. What would you think about buying 2 of these in order to perform cable crossovers?

Just for info. Mirafit does a video showing the construction of virtually the same price of kit. Also, possibly slightly better instructions? At least kit is numbered. :)

Thank you!

The Valor Fitness plate loaded Lat Pulldown is a 10/10 perfect piece of equipment for the price

Nice review! I was looking at something similar prior to settling on my lat pull down machine. My primary concern was having a stationary piece in my gym which I could not move, as well as having to bolt it to an interior wall. Not sure how something like this would have reacted with the plaster. Looks cool though, and I love the plate loaded option! Way cheaper than getting a machine with a stack, and you have the weights anyway might as well use them!👊👊

Hey man, great review. I'm across the pond in England and own the Archon Fitness pulley (sold by a UK company). Just wanted to know what is the hole spacing on this unit and how high off the ground is the first hole?

hey what kind of bolts did you use to mount the bracket to the board? I cannot find the correct size bolt

the 2inch sleeves are sold separately btw

what is that random part called? i have this pulley system and mine did not come with it

Thanks for the review! I was looking at getting one of these once they are back in stock. Do you know if bumper plates will fit on this? Also does any issues with the pulleys not feeling smooth? I’ve never used a plate loaded cable machine before only the ones you see at a commercial gym.

Nice review, man. Just curious, how tall are you? No problem doing tricep extensions?

I like the Portuguese flag hanging in the background!

Mine is very stiff. It has 20+ lbs of resistance when pulling both handles with NO weight on it, and when letting go the cables go back very slowly with no resistance. I've lubricated everything and the wheels spin very freely, so I'm thinking it's an issue with the cable?

Thanks for the review. Looking to buy 2 of these to create a crossover setup. Do you think if the units are mounted opposite each other that the pulleys would swivel enough toward the center? I'm thinking of mounting them opposite each other on the sides of my Rogue Monster Lite power rack.

Great video, can you perform lat pull downs on this while sitting on a bench? Or do you need to sit on the floor?

What is that piece that lets you connect both cables for an attachment called? Trying to find this on Amazon but it's been difficult. Tried "carabiner eye plate" but all those I can find are very small.

anyone know the difference, if any, between this and Titan's tall model, they look the same but Titan is $100+ cheaper - TALL WALL MOUNTED PULLEY TOWER V3

My garage is sloped so when I bolted on the bottom it hit the stud and went in smooth but the top didn’t hit the stud what do you recommend me do??

When using the carabiner bracket while doing triceps .. does it feel right? Or is it better doing it only with one side ? And how heavy does it feel using the carabiner bracket with a couple of 45's as weigh. Would you do a video using the carabiner bracket for triceps?

I just assembled mine, and I have to make the adjustments like yours to mounting it. Do you know the screws and anchors you used on the cinder blocks and the wood?

what is the purpose of having two separate pulleys? you can connect two handles to one pulley and how would it be different? why is it better than a machine that has only one adjustable pulley?

Nice thank u getting one of this

Hi. I was looking into you video. Like the way you explained. Question for you. If you had a choice between BD-62 and Titan Pulley Tower V3. Which one would you recommend better. I know the price is already a difference of a 150USD. Also heard from a video of the Titan the pulleys are not that great, there were some with different center piece and the person that showed mad a difference from very good to poor. How are the pulleys in the BD-62? Thanks for your advice.

Do your cables and the dual pulley piece both twist if no or very light weight is used?

do you think that this would be worth $150 today? How has this held up?

Mine works great, but when I adjust the pulleys to the top the cable gets off track or grinds

Hi, looking for such thing for here in the Netherlands? This station is only available in the usa. Anyone suggestions?

Are you sure that the wall mounting things aren't at the same level? Would seem ridiculous if they wouldn't be. I think it's more likely that your wall isn't straight than that the mounting things wouldn't be even. You can just check it by measuring the length of those mounting things, and if they are even, than it's your wall or the floor that isn't even.

Might seem like a dumb question but can you do Lower chest cable flys with this?

Hey mate, thanks for the review, sure helps! Although it's not avaiable to Portugal so far. What's thoughts about the bearings? Does this machine works as fluid as a professional or gets a little stuck when you add more weight? P.S. Essa peça vem explicada no video de apresentação do site da marca :)

Hey great video! Does anyone know what that part is called that joins both the pulleys together?

Is it necessary to mount it to the wall?

Could you attach a lat pull down bar and use it for that ?

What is the weight ratio on this? How much resistance will i get for two 45's

This has 200 pounds of weight capacity vs 350 for the titan model, have you run into any issues with that? DO you think that means 200 pounds worth of plates?

Are you saying that once assembled, the wall mounts are different distances from the wall? That'd seem like an incredible design oversight!! Still like this machine after a year? Thx for the review.

Great review, I bought the titan fitness one, I am trying to buy one of those little pieces you described to connect the two cables for one attachment like a lay pull down that you said you couldn’t find in the instructions. Do you know what it is called so I can buy one?

I was just checking this out on their website but the price says $56.19 and i missing something? Why so cheap or it that just for a certain part of machine?

Do you know if it's possible to convert a single pulley (one pulley) system, similar to this, into a dual pulley?

Where did you get your dumbell sets and rack??

How does chest flies feel on that

Can you do cable rows while seated on the floor? Can you post a video of that?

Hi.. Whats your experience of doing chest Flys on the machine.. How does it feel..?? And how different it feels from the traditional functions trainer cabel Flys

hey man i assembled mine but it kind of sucks, it’s not smooth doesn’t even feel like resistance and when i use the pulleys there is so much slack, meanwhile it’s setup up perfectly, does it need grease or something

Maybe you answered this already but what’s the loading limit for weight?

What’s that thing call at 4:31 which is used to convert dual pulley into one?

Do you know if the BD-61 any good??

Mine does not pull smooth like that AT ALL. I literally have to use 2 hands just to pull the cable even with very light weight and once I am able to pull the cable, it just sits there, the weight doesn’t even want to slide back down......

What happens if you don't mount it to a wall?.

Can you do cable flys for chest using a single arm grip attachment on each side? thinking about getting this product or the functional trainer for flys. Also Titan Fitness has similar options at a similar price

How long did it to come because I been waiting for few days now

Awesome review! Does a 45lbs plate fit or does it hit the wall?... Or ground?

Is it true weight?

Lol uma peça que não vem mas instruções hum 🤔 pelo menos vem a mais e não a menos 😂

Thanks for a great review! I set mine up today and was wondering what the name of the two to one metal bracket you demonstrated for using a lat pulldown? I can't seem to be using the right keywords on Amazon. Thanks!

🤯

A product made in china that does not come with good instructions? I was looking to get this for quite some time until the inventory diminished. Cool flag! My wife is Portuguese.

looks like it will tip over it you put two 45lbs on it and attempt chest press

Hmmm...Titan Fitness has pretty much the same thing expect it costs $150.

Jeez... Stop waving the camera about!

Stirrup Handle Length?? Only stirrup