Vauxhall Signum Grating Noise From Front Whilst Driving

Рет қаралды 16,202

Күн бұрын

Vauxhall Signum Grating Noise From Front Whilst Driving. In this video we diagnose the grating noise from the front of this Vauxhall Signum 1.9. It sounds like its coming from the center of the car so lets jack it up and have a closer look. #retrorestore
0:00 Intro
0:45 Listen to the noise
3:10 Stripping down the front drivers wheel
5:52 Removing the driveshaft
6:18 Locating the rumbeling noise
8:22 Checking the wheel bearing
9:16 Removing the wheel bearing
10:59 Fitting the new wheel bearing
14:15 Refitting the driveshaft
16.00 Refitting the disc and brakes
17:32 Tightening up the drive shaft bolt
19:28 Testing the car.
Our Retrorestore T shirt available at www.ebay.co.uk/itm/1652007921...
Join me here at kzfaq.info...
If you would like to support my Retrorestore Channel, You can check out my Amazon Wish List and buy something for the channel. www.amazon.co.uk/hz/wishlist/...
The music in my videos is from www.epidemicsound.com/referra...
Stuff I use
The Powder Coating equipment is from Electrostatic Magic and they have kindly supplied me with a discount code for anyone wanting to buy a system from them. Just visit their website www.electrostaticmagic.co.uk/ and when you purchase, Just include the discount code - RetroRestore1 and you will get a 5% discount for all their products.
When customers enter the code when buying a system, they also get free shipping by entering the additional code FREESYSTEMSHIPPING Thus you need to enter both codes separately before making payment.
Sealey Go through socket set amzn.to/3tZtwsC
Respirator Mask amzn.to/3p3MKKs
Clarke King Pro Vac amzn.to/2WDoeT4
Sealey CP1202KIT 12V Ratchet Wrench Kit 3/8 amzn.to/3dgdXa0
Cyclone Dust Separation Collector amzn.to/2S8guKA
Media blasting cabinet amzn.to/2ADpv3c
Dremmel tool amzn.to/2Rcnfuh
Clarke Mig Welder amzn.to/2QwTgrx
A Good quality Makita battery drill amzn.to/2QKcfPy
My Camera Equipment
Gopro Hero 7 Black amzn.to/2QzABvz
Rode Wireless Go Microphone kit amzn.to/37Et48E
Studio lights amzn.to/2TGzDza
Check out our other channel RETROHAX at / @retrohax
Music
Intro Martin Butler www.totallyroyaltyfreemusic.co.uk
Main Tracks Credited to Epidemic Sound (www.epidemicsound.com)
/ retrohax
Twitter at / martinbutleruk
email inquiries: retrorestoreuk@gmail.com
PRIVACY POLICY and FULL DISCLOSURE:
Retrorestore is a participant in the Amazon Services LLC Associates Program (UK)
DISCLAIMER: The product links in this video description contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission if you purchase. This helps with my channel and allows me to continue to make videos. Thank you for your support.
Retrorestore
MMXXII
All Rights Reserved

Пікірлер: 118

@Wetthewhistle 2 жыл бұрын

The dashboard is lit up like a Christmas tree. You could make a video out of sorting that 😂

@mikenonameneeded3485 2 жыл бұрын

I'm in the USA, what i like about your channel is that you show us how to do repairs in our driveway using common tools. You also convinced me to buy a reel mower. I found one at a flea market for $100. It is a McClain type. I knew instantly what it was and how good a bargain it was from watching you repair those types.

@retrorestore 2 жыл бұрын

Thanks Mike, glad you enjoy my videos.👍

@user-sf7kl9uh7k 9 ай бұрын

He's a good lad, nice you guys across the pond also enjoy his videos.

@mikenonameneeded3485 9 ай бұрын

@@user-sf7kl9uh7koh yeah. We are all the same no matter where we live. It’s hard to pass up a broken mower or any machine without me picking it up and bringing it home and repairing it. You can’t get ahead in life always buying brand new….

@user-sf7kl9uh7k 9 ай бұрын

@@mikenonameneeded3485 My parents are terrible, they'll throw anything away, it's disgusting.

@mikenonameneeded3485 9 ай бұрын

@@user-sf7kl9uh7kyep, same with mine.

@robertbills4290 2 жыл бұрын

Grand job Martin. But for now I'm waiting for the warmer weather before I venture out to sort out the things I know need doing on my own car. Keep yourselfs safe Rob

@STTC 2 жыл бұрын

An absolute pleasure to watch Martin

@paulstir 2 жыл бұрын

Great detailed content Martin ( it’s what we love & you skip the boring bits )

@retrorestore 2 жыл бұрын

If you like this video, please hit the thumbs up button and concider subscribing and checking out my other videos.

@888johnmac 2 жыл бұрын

yeah , premieres on the day please ( otherwise i forget )

@lewisyarwood4381 2 жыл бұрын

Another lovely job finished in the same video keep up the good work mate sod the haters 👌

@ronmccullock1407 2 жыл бұрын

Fantastic video I really enjoyed it 😀

@williamspaul1805 2 жыл бұрын

Proper hands on real life stuff. Love the content.

@alandykes2519 2 жыл бұрын

Great job Martin it's surprising how sound travels on a car👍👍👍👍

@offbeatwarble 2 жыл бұрын

Hub bearing to swivel hub bolts are 90nm + 30° + 15°. The trolls will be on fire over using copper slip on a bearing with abs sensor built in 🤣

@terryatkinson3182 2 жыл бұрын

The trolls know everything... as long as it works, it's fine by me.

@matthewharmer1656 2 жыл бұрын

Great how to video,I always copper grease the shaft splines , looking forward to more videos.

@haydenuk02 2 жыл бұрын

Great work and thanks for sharing this with us take care

@Phil-1969 2 жыл бұрын

Another great video Martin, I really enjoyed that . Happy New year to you all

@retrorestore 2 жыл бұрын

Happy new year Phil.

@adammcallister2260 2 жыл бұрын

I commented when you did the drive shaft and brakes that you had a whirring noise on the test drive! I knew something was amiss. Glad you got it sorted. I’ve never done a wheel bearing with the ABS built in before so it was good seeing how simple those are. I expected it to be a right nightmare!

@retrorestore 2 жыл бұрын

The tyre was 15psi in that video as the car was standing for a while The noise went when we pumped the tyre up Adam.

@KensSmallEngineRepair 2 жыл бұрын

Brilliant Martin! We need more Lee!!

@retrorestore 2 жыл бұрын

Only on Butler's Empire Ken lol

@kyledale201 2 жыл бұрын

Another good video Martin keep them coming pal

@retrorestore 2 жыл бұрын

Thanks 👍

@normsmowers4758 2 жыл бұрын

Top job Martin 👌

@garywalker3818 2 жыл бұрын

good blog martin keep them coming Gary from Crewe

@geoffgreenhalgh3553 2 жыл бұрын

Job well done.

@williammcgowan6687 2 жыл бұрын

A job well done mate .

@VSTV1993 2 жыл бұрын

Bulb Warning light, ABS light, spanner light and the good old Fuel Light, did you tell Jimmy Christmas is over 😂

@coatesie973 2 жыл бұрын

Another great job Martin 👍

@retrorestore 2 жыл бұрын

Thanks 👍

@neilaaitchison4473 2 жыл бұрын

Love it great video again Martin. Bert in the background pulling his usall face expressions 😆

@retrorestore 2 жыл бұрын

😁

@frednetherlands887 2 жыл бұрын

Thank you!

@allanmason7544 2 жыл бұрын

another fab vid love it

@harryc3725 2 жыл бұрын

Great video Martin also like the new logo!!

@retrorestore 2 жыл бұрын

Thanks Harry

@chasmcl42 2 жыл бұрын

It was worth the wait Martin, a few years back I had a rumble i changed the long drive shaft, turned out the left front wheel was loose (what a wally) never did tell the wife 🙄

@terryatkinson3182 2 жыл бұрын

Shhh your secret is safe with us... I've bought bits, then fixed the old ones and she's none the wiser. She's no idea of what's in the shed as she's no key for it 😉

@carlsiddorn3340 2 жыл бұрын

Spot on Martin nice job done ✔

@retrorestore 2 жыл бұрын

Thanks 👍

@andy_v4443 2 жыл бұрын

👍👍 easy fix 👍👍 Great stuff 👍👍

@dallasgarner1990 2 жыл бұрын

Top video as always

@retrorestore 2 жыл бұрын

Thanks again!

@douglasgreen437 2 жыл бұрын

Great instructional video....🤔👍

@retrorestore 2 жыл бұрын

Thanks 👍

@mc4262 2 жыл бұрын

When i did my 04 zafira omg beat it silly to get it out both sides 🤪 🤣 nice to hear u use the old F T too same as me 💪👍 nice job .

@vdubs6068 2 жыл бұрын

Great Vid Martin 👍

@retrorestore 2 жыл бұрын

Thanks 👍

@dagenhamdave2611 2 жыл бұрын

martin great video

@retrorestore 2 жыл бұрын

Thanks 👍

@Strike86 2 жыл бұрын

Removing a wheel bearing with a copper hammer, wow! Buy some lottery tickets mate, you were incredibly lucky.

@zedman442 2 жыл бұрын

Good thing they not pressed in as they are a nightmare. Bolts are great

@chasmcl42 2 жыл бұрын

Haha was waiting for it to start, noticed it was it three days.🙄🙄

@hardworker8030 2 жыл бұрын

I was the same. I looked at the date three times

@Jasonhughes258 2 жыл бұрын

You two weren’t the only ones who thought that😂

@CChallinor 2 жыл бұрын

to save some folks time, to tighten a bolt FT means to tighten it 'Fully Tight' or as tight as you can make it..

@andytownsend9163 2 жыл бұрын

Great job Mart, looks like it all went pretty smooth 👍 The wife wants to know if Gary is doing Project Man underpants. 👍👍

@retrorestore 2 жыл бұрын

🤭 There's an idea lol

@cabdriveruk 2 жыл бұрын

Great video Martin. Wow you was lucky getting the old wheel bearing out, they are usually a pig to drive out with the corrosion. Nice new bearing kit with everything included. Did you have to stake the new centre nut or just torque it to spec ? Cheers, Jeff.

@retrorestore 2 жыл бұрын

Just torque it Jeff. It was a pinch nut

@lennonpolo 2 жыл бұрын

@16:18 Can you see a face in that caliper? Great vid!

@HepcatHarley 2 жыл бұрын

Unbelievable! :)

@mr1pearl 2 жыл бұрын

Great grab Martin bet you wish you had three hands at times 👍

@garyclifton2180 2 жыл бұрын

Nice fix Martin need to check his lights now look like bulb warning light was on

@retrorestore 2 жыл бұрын

Yeah, I know gary.

@kas5857 2 жыл бұрын

@10:15 - instead of hitting on the bearing, put all 3 bolts back in loosely and hit the bolts with a hammer to push the bearing out.

@terryatkinson3182 2 жыл бұрын

When I saw you about to hammer off the bearing, I thought, that's not coming off 🤐 I'm wrong again!

@MS-yy2dh 2 жыл бұрын

Great video. I have a similar sound and wonder if it could be the driveshaft bearing. In your case, did your sound change when driving and turning in different directions?

@retrorestore 2 жыл бұрын

Difficult to say, when the driveshaft went a couple of months back, it clonked when turning the wheel.

@robertdavis2229 2 жыл бұрын

Great videos 👍 have you ever bought parts from car parts 4 less ?

@retrorestore 2 жыл бұрын

I'm not sure Rob, I can't remember lol

@mohitl1697 2 жыл бұрын

Isnt a way of checking the wheel bearing rotating the wheel with one hand on the spring... if the wheel bearing is bad it will transmit the shock to the spring allowing you to feel it

@TheIainballantyne 2 жыл бұрын

FT. Just look it up . Belter !😂

@ionracer24 2 жыл бұрын

Nice! How much r yall payin for diesel over there?

@PTTM2006 2 жыл бұрын

I wish my dealer's mechanics worked as good as you mate. @ 15min50 seconds that's a Yamaha engine if I ever heard one :)

@retrorestore 2 жыл бұрын

Yes it was, a thundercat 600.

@PTTM2006 2 жыл бұрын

@@retrorestore Nice to see he's enjoying it, that's a nice rebuild. I miss that sound, it's -20°C here in Quebec right now, My Fazer 1000 is frozen solid in my shed

@davidjohnston5692 Жыл бұрын

I’d love to have your skills your a guy seems to be good at everything

@stuartwest1236 2 жыл бұрын

Great job, Martin,did you learn from someone how to do all this work or are you self taught?

@retrorestore 2 жыл бұрын

Self Taught Stuart since the age of 14.

@RumpleXstillXskin 2 жыл бұрын

The bearings are half price on eBay ?

@cw2126 2 жыл бұрын

👍👍👍

@davidgill1540 2 жыл бұрын

When you tried it with the old bearing the Speedo went up,with the new bearing it didn't, did the wheel go round when you asked your son to look ??

@retrorestore 2 жыл бұрын

Yes but the passenger side didn't, that's why

@Phantom0309 2 жыл бұрын

Jeez is this a blockbuster movie premier we are waiting for boys?

@garywalker3818 2 жыл бұрын

it s a wheel Bering martin Gary from Crewe

@PhoneVidoes 2 жыл бұрын

Cant believe you didnt powder coat something in this video 🙂

@georgebondchatshow54 2 жыл бұрын

Gary is pullin faces

@user-sf7kl9uh7k 9 ай бұрын

Martin what happened to the Siggy? Is Drivetech ok, I fitted a pair of their top mounts a few months ago! 😬

@retrorestore 9 ай бұрын

that got scrapped finally.

@user-sf7kl9uh7k 9 ай бұрын

@@retrorestore Sounds like you didn't like it! Cheers

@retrorestore 9 ай бұрын

@@user-sf7kl9uh7k no, not me, my son scrapped it

@01arron 2 жыл бұрын

What size if your copper hammer please fella, I want to buy one but there’s a few sizes

@retrorestore 2 жыл бұрын

I have a couple, I can't remember the sizes.

@matthewking5612 2 жыл бұрын

Dinotrol's good for protecting brake pipes.

@noeldarby1635 2 жыл бұрын

I have 2litre turbo 56 plate signum.....had front springs replaced but it makes a banging noise going over bumps........any ideas ?

@retrorestore 2 жыл бұрын

Make sure the top nut is secured.

@noeldarby1635 2 жыл бұрын

@@retrorestore bro it's just passed an mot......surely it wouldnt something so simple as that would it............?

@retrorestore 2 жыл бұрын

If its just passed am MOT they should have picked up on it but the nut may have come loose after.

@888johnmac 2 жыл бұрын

nicely done .. but christmas is over , time to put away the christmas lights .. oh sorry thats the dash , lol

@derbyjohn972 2 жыл бұрын

Another job you made look easy again. Bit disappointing no swearing 🤬🤬😂😂😂😂

@-EC002- 2 жыл бұрын

Those bolts are not FT torque, you should use the German torque ;)

@Kammii88 2 жыл бұрын

I been told jack the tyre up grab it from 9 to 3 o'clock push it in and out then From 12 to 6 give it wobble that's best way to check faulty wheel baring what you think ur a pro 😁

@retrorestore 2 жыл бұрын

As I said in the video, There was no play in this bearing bud.

@hardworker8030 2 жыл бұрын

I wouldn't want to buy a car off you if you do things up FT (Finger Tight). I think one of my my wheel bearings is on it's way out because when I go around a roundabout and pressure is on the passenger side you can hear a noise.

@petefroud5308 2 жыл бұрын

The copper slip has lasted a fair few years.

@retrorestore 2 жыл бұрын

Yes pete, I'm half way through it now

@corvair140 2 жыл бұрын

I said it was a wheel bearing on the driveshaft video. It was obviously a bearing and not tyre noise. But hey 🤣

@retrorestore 2 жыл бұрын

The tyre was down to 15psi in that video as the car was standing for weeks. The driveshaft was gone as the clonking stopped.

@therealbigmac7451 2 жыл бұрын

Was the scratch card a winner? 😎

@martincraig1974 2 жыл бұрын

This premiere does my heed in you click on it to watch and its not on for two days come on🙄

@berndb.5097 2 жыл бұрын

Hi Martin, you did not understand. The sound was to hear if the wheel was turning. Sorry that I had to tell you this unpleasant news. Now you have to take everything back down again.🤷‍♀️