Volvo Penta TAMD41-P Turbo Removal & Refitting

Рет қаралды 11,790

9 ай бұрын

My volvo penta TAMD 41-p Turbo was starting to show signs of wear and i decided to have the Turbo reconditioned by Universal Turbo in Hampshire .
I hope that you find the video useful and welcome your comments .
#volvopenta #tamd41p #turbo #turbodismount

Пікірлер: 45

@schmango78 Ай бұрын

Thankyou for this excellent step by step process . Your videos are saving me huge $$ and I almost certainly would have made mistakes trying to do this without your guidance . I’m removing my turbo next as I reckon I have coolant getting into it. Tamd40 cheers

@shakyangler Ай бұрын

Glad it helped. If you are loosing coolant water the gasket on the exhaust manifold fail and the water is slow to drip out by which time the water is evaporated due to the heat. So hard to find . Check that first . They way found it was leave the engine hatch up and go full WOT and you will see the water drip out which is normal the first exhaust port hole nearest the turbo. You can sometimes get away with tightening the exhaust manifolds bolts up to reseal the gasket

@KD-KayakDanglerUK 9 ай бұрын

Great video fella , that's a lovely boat 🛶🎣

@shakyangler 9 ай бұрын

Thanks buddy

@valefur72 7 ай бұрын

Great job!

@richardjarvis4968 9 ай бұрын

well done Jamie a great job done there mate must save you a fortune knowing how to do it yourself great job 👍

@shakyangler 9 ай бұрын

I am a tight arse so I do it myself . Yes I do save a. Fortune 🤣

@willimondo Ай бұрын

When I did mine I was told to bleed the water feed pipe. Do this once it’s running, crack off the nut until water comes through then immediately tighten 👍

@KerbsideClassics 8 ай бұрын

great video mate very informative

@shakyangler 8 ай бұрын

Thanks buddy 👍

@kahanalawaia2274 8 ай бұрын

Thank you! Very helpful.

@shakyangler 8 ай бұрын

Your welcome 👍

@johnsonevans8616 8 ай бұрын

Love the commentary and useful content. What coolant are you using? It’s not the expensive VP green stuff. Cheers

@shakyangler 8 ай бұрын

The antifreeze I use is Triple QX G12+ red concentrate 👍

@davidandersson7945 28 күн бұрын

hello and thank you for a good video, im about to do this operation myself next week. Can u remember the dimension of the nippel/hose that u drain coolant from ? :)

@shakyangler 28 күн бұрын

13mm or 15mm from memory.

@malcolmhaviland8434 8 ай бұрын

Great very informative video, would be interested in the total costs involved, I have a 31a that I want to overall

@shakyangler 8 ай бұрын

£695 + vat for turbo . Turbo gasket kit £70 from Keyparts 👍

@malcolmhaviland8434 8 ай бұрын

Thanks, it will be a job well worth doing.

@user-qf9oi9zu6b 4 ай бұрын

Hi, I’ve watched lots of your videos and have had great success on my Volvo penta tamd31p. Could you tell me why you use Triple QX antifreeze instead of Volvo penta green antifreeze? Keep the great videos coming. Cheers

@shakyangler 4 ай бұрын

The antifreeze I use has the same specifications as the Volvo penta but less than half the cost .

@user-qf9oi9zu6b 4 ай бұрын

Thanks for your quick reply. Love watching your videos😊

@vipercoil630 6 ай бұрын

Hello, Thanks for the video. I have the same engine. What was the cost for the refurbished Turbo? Do you find your air filter gets dirty quickly, even with a new Turbo? I found that it is important to have the plastic hose inserted all the way in the air filter housing to keep the filter clean longer. Thanks again.

@shakyangler 6 ай бұрын

Glad you enjoyed the video . The cost was £695 + vat . The air filter did get dirty but I have not checked since I changed the filter.

@ralph9987 4 ай бұрын

Good job. Curious about 2 things…price of overhaul and how many hours on the engine. Thanks

@shakyangler 4 ай бұрын

The price was £650 +vat and 1500 hours 👍

@ronnybastian4321 2 ай бұрын

Hello from Germay 😊 which Size (Diameter) has the Pipe to drain the Water Coolant?

@shakyangler 2 ай бұрын

From memory it was 3/8 inch Hose or a normal garden hose work well .👍

@headshot8888 Ай бұрын

Was this engine smoking any. Burning oil from worn turbo seals?

@shakyangler Ай бұрын

No . Done my turbo because the vanes were worn.

@aquious953 2 ай бұрын

Do you have to drain all the coolant? Can't you just drain from bottom of turbo drain.

@shakyangler 2 ай бұрын

You can just drain the turbo down but I changed the coolant as it was due a change.

@valefur72 7 ай бұрын

Dear Jamie, do you know where the serial numbers are located on the boat? Thanks in advance!

@shakyangler 7 ай бұрын

Do you mean the boats serial number or the engine number

@valefur72 7 ай бұрын

@@shakyangler there's another CIN on the inside of the boat, in a hidden position. Maybe near the engine.

@freitastubes 7 ай бұрын

HO=ow many hours on that turbo?

@shakyangler 7 ай бұрын

1500 hours

@aquious953 2 ай бұрын

How much was it for reconditioning?

@shakyangler 2 ай бұрын

£650 + VAT

@aquious953 2 ай бұрын

@shakyangler my guy in Canada, says $1,500. Our dollars nearly been printed out of existence, so that explains double what you pay.

@shakyangler 2 ай бұрын

I can buy the turbo for £1200 Here New . Have you looked at buying abroad and having it shipped in

@aquious953 2 ай бұрын

@shakyangler my volvo Kad43p turbo (same turbo as yours) is around $5,000. I think a rebuilt one is about half that. You can get an aftermarket one for around $1,500. I'm talking Canadian $.

@Mel-he1hg 2 ай бұрын

Nice video mate, I have a Kad44 and I’m looking to get my turbos refurbished the same as yours what company did you use ?