Рет қаралды 35,072
This switch has a special procedure for removal and installing back. Always test your brake lights for correct operation after replacing the switch. You don't need to disconnect the car battery, but you MUST remove the electrical connector while the switch is out, otherwise the brake lights will stay on and will drain your car battery
Other brake lights problems:
- the two lower brake lights are related to the REM (Rear electronic module) inside the trunk, check fuses and relays
- the upper (third) brake light is related to the CEM (Central el module) under the dash. On 2004-up this gets wet from water leaking and needs removed and fixed - check Ebay services or Xemodex (expensive)