Oh wow! That's a real thing, I'm going to have to try that in my 10' jetta TDI.
@martinduarte48788 ай бұрын
Thank you 👍🏻
@seandeltaylor9622 ай бұрын
Hi. New subscriber here. I need help pls. I have a 2006 a4 b7. I PRNDS was on I changed the sensor and did some transmission work. Afterwards the forward gears not engaging. Also tried a complete used transmission and still have the same problem. Please advise me as what to do. Thanks
@ShowTimeSchowe Жыл бұрын
I have this same problem with my mk6 gli that is apr stage 2 with their tcu tune. the transmission reset works but is only a bandaid as the problem comes back a few days later.
@mikesrandomvideos Жыл бұрын
try reset then adaption.
@codered2661 Жыл бұрын
Did you lose the dsg tune after resetting?
@Zakw17 Жыл бұрын
No
@Zakw17 Жыл бұрын
Reset then clutch touchpoint adaptation? I guess that makes sense. Resetting after the touchpoint adaptation seems counterproductive
@besitocilla45627 ай бұрын
I have audi A3 2011 automatic transmission.When car is warm and when downshifting from 3 to 2 makes a krakk sound.
@omarmarrhich5211 күн бұрын
You sure it's not the inner cv joint ?
@EclipseJay8 ай бұрын
So this wont cause me to lose my Unitronic Stage 2 TCU tune ? Maybe once a week if I find myself coming to a stop sign or red light thats on a hill my car just stalls out , I dont lose power or anything , the motor just shuts off . The forums point to guel rail pressure sensor or crank position sensor .
@davidclark33047 ай бұрын
I assume that's why VW went to dry plate clutches.
@martinlara81295 ай бұрын
Having the same problem of the car lunging foward but only when car is cold
@mc.cringe89954 ай бұрын
Hey. New subscriber here , dont know if you would respond but i hope you do . Have a 2011 a4 1.8t . 1st issue, car doing a little jerk thing when im about to accelerate or reverse.feel a little laggy.. 2nd ..car drives really good on the road when warm, however, on any slight inclines or hills .if i brake or start from a standstill, only on inclines, the car revs out and jerks foward then accelerates..no codes showing.. Is it cvt oil needs changing,? , transmission issue? Injectors?? I have no idea..
@EmlinRaj3 ай бұрын
same here with VW cc 2011 Automatic Transmission... Any Updates?
@vsagar18063 ай бұрын
Thanks for the video ,,,,my polo Dsg DQ200 is behaving a lot better after I followed the reset instructions. But the forward creep function or lunging still doesn't work ,,,,,in stop and go traffic it does work sometimes but rarely Please suggest PS:no issues with gear shifting though
@mikesrandomvideos3 ай бұрын
yea Mine worked great for a while then after about 2 weeks the lunging started again. I am not sure what causes this. I am going to try doing the reset then doing the adaption procedure. IDK.
@cesargodinez24502 ай бұрын
@@mikesrandomvideos Did the adaptation work ?
@xhelos4337Ай бұрын
I have a polo dq200 also 65k miles , lunges forward and jerky of stand still
@TheGorgievski Жыл бұрын
I have problem with takeoff it’s very aggressive and jerky with first and reverse, no fault codes found. None of the resets worked so far and what I have read on the forums it could be faulty N216 / N216 solenoids I am not sure are they hard to replace or should I visit a specialist
@mikesrandomvideos Жыл бұрын
dont think it is that.....you can replace the mechatronic or valve body. cant find anything but china stuff for those solenoids. I would try a reset like in the video followed by a Trans adaption. Need ross tech. i replaced the mechatronic and mine even when it was new did what yours is doing. I dont know what the car was like before I bought it with a faulty mechatronic. Wouldnt drive had a direct short.
@jimmygrffiths89169 ай бұрын
I got the same problem
@TheGar0ne7 ай бұрын
same issue, any updates ?
@TheGorgievski7 ай бұрын
The mechatronics damaged the clutches needed to replace the whole mechatronics unit and the clutches again so whole rebuild of the transmission which cost 2000 euros in Macedonia ( 800 clutches and 1200 mechatronics ) Changing only solenoids will not fix anything because the channels inside the unit are damaged. This is my experience maybe yours is different No codes in scan
@FilipHDYT56 ай бұрын
@@TheGorgievskibrat kaj mozhe da te najdam na socijalni mrezhi da te prasham za dsg, imam i ja malce problemi pa ko poiskusen ti da mi objasnish sho si naprael
@ihateidiots948411 ай бұрын
There is one more thing: buy a car that fits your height