Wash Machine Doesn't Fill / Slow Fill With Water

Wash Machine Doesn't Fill / Slow Fill With Water - EASY FIX!

Рет қаралды 34,116

6 жыл бұрын

In this video you will learn how to easily fix a wash machine that won't fill with water or fills very slow. It is typically a very easy fix. Either the screen on the fill valve is clogged with debris or hard water deposits. The other reason your water may not be filling is that the fill valve may need to be replaced. That is also an easy repair.
Tools you will need are:
- Plyers
- White vinegar
- Tooth brush

Пікірлер: 15

@Arcturian1111 4 жыл бұрын

You have to clean both of the screens in each inlet inside the washer hose inlet on the washer itself. There are two screens for each cold and hot on the washer.. One is inside the machine inlet that you can't see, and one outside the machine that you can barely see, it has a tab you pull out. Use a flashlight and look inside the inlet tube or nipple that's threaded, after you pull the first screen off you'll see it.. My inside screen was clogged bad, so I just took it out with a flathead screwdriver, and eliminated it totally. Both hoses were good, I saved some money, didn't need new hoses... All fixed.

@goldblooded7020 4 жыл бұрын

Thank you!!! You have a great way of explaining things!!! I'll be back to let you know how it went.

@TheBestOrion 3 жыл бұрын

How'd it go?

@annmarieduran4014 Жыл бұрын

Great advice I used lemon juice to clean filter but no dice. Thanks

@karinmerrique 4 жыл бұрын

Problem solved! Thanks a mil! 😁👍🏼

@helpinguonline 4 жыл бұрын

Glad I could help!

@user-mz2xk3dx4n 3 ай бұрын

Thanks

@helpinguonline 3 ай бұрын

No problem

@user-xh4sw1jl1y 3 жыл бұрын

Nice

@100mitchellboy 4 жыл бұрын

Nice, sometimes it’s the valves as well.

@marifergarcia4652 3 жыл бұрын

I just change the valve but still take too long for filling the tank specially when I have the last filling the hoses are ok what do I have to check

@helpinguonline 3 жыл бұрын

There aren't many parts involved... I would disconnect the water line from the back of the valve and turn it on with water line end in tub of washer... see if that is clear. Then check the screens between the water line ends and the valve and make sure they aren't clogged. If you have a new valve and it is working properly then the only thing left is the line between the valve and the tub filling. You should be able to track it down. Hope that helps.

@marifergarcia4652 3 жыл бұрын

@@helpinguonline thank you very much I will going to verify maybe the valve is having a problem.