Watch This Before Buying The BIG Woodworking Tools

Watch This Before Buying The BIG Woodworking Tools | Must Have Tools

Рет қаралды 476,164

Күн бұрын

It can be hard trying to decide in what order to buy the bigger woodworking tools like miter saws, table saws, jointer and planers. When do you buy a table saw or a miter saw for woodworking? Should you buy a jointer or a planer first? If you are like me, you research a lot of tools and information before making big tool purchases. I hope this video helps you when deciding what big woodworking tool to buy next. In this video I will tell you in what order I got my major woodworking tools for my wood shop. Amazon and other affiliate links are used in this description and they directly help support this channel. Using the links doesn't cost you any extra but it helps us and we greatly appreciate your support.
VIDEOS TO WATCH NEXT
Watch This Before Buying Playlist: • Watch This Before Buying
6 Essential Beginner Woodworking Tools: • Essential Tools Every ...
DeWalt DW779 Review: • DeWalt DWS779 Miter Sa...
Delta Cruzer Review: • Delta Cruzer 12-Inch S...
Jointing without a Jointer / Jointing Jig: • 5 Ways to Joint Boards... :
TOOLS AND SUPPLIES SEEN IN THIS VIDEO
Use code 731CMT10 to get you 10% off CMT products using the links below:
My CMT Miter Saw Blade: lddy.no/yvio
My CMT Table Saw Blade: lddy.no/yviq
My Other CMT Table Saw Blade: lddy.no/yvir
DeWalt DW779 Miter Saw: amzn.to/3vHN1qm
Delta Cruzer Miter Saw: amzn.to/3uLAC3B
The Delta 36-725 is now the 36-725T2 amzn.to/3Icse6s
Also the same saw in orange Ridgid R4560 homedepot.sjv.io/QyYQX6
Wahuda Jointer: amzn.to/3vOBAND
Delta DW735X: amzn.to/3phncLC
Less Expensive WEN Planer: amzn.to/2TtMpGy
PLANS and MERCH
www.731woodworks.com/store
Support our channel by shopping our affiliate partners:
Bits & Bits for router and CNC bits here bitsbits.com/ref/6215/ Use Code 731WOODWORKS for 10% off!
Taylor Tools for saw blades, chisels, clamps and more: lddy.no/yoeb
Pocket Hole Jigs, Screws and Clamps: masscaproducts.com?aff=3
Join this channels membership to get access to exclusive member only livestreams, discounts, and other perks:
/ @731woodworks
You can support us on Patreon as well / 731woodworks
#woodworkingtools #woodworking #tools

Пікірлер: 330

@731Woodworks 3 жыл бұрын

6 Essential Beginner Woodworking Tools: kzfaq.info/get/bejne/mtxmqJp7srDbqZ8.html

@NewBeginningNewCreation 3 жыл бұрын

Have you ever watched Bibleproject videos here on KZfaq?

@motsy15 Жыл бұрын

When you said “ if it ain’t square you wasted your money”, I hit the sub button!

@bigdogwdc 3 жыл бұрын

Excellent advice as always. My first major tool was a miter saw that I still use. Unfortunately it does not slide. Second major tool was a bandsaw that was gifted to me. Highly recommend getting one of those ASAP! I use that thing all the time.

@jonathanlillpopp2869 3 жыл бұрын

Hey Mr. 731! Thanks for the video! My two cents worth for everyone: Dust collection is a must for the tablesaw, jointer, and planer. Love your shirt! Take care, brother!

@artvisionman 3 жыл бұрын

Thanks ! Good video for those who seriously wanted to set up a woodworking workshop!

@SoundsLikeZach 3 жыл бұрын

Love the video, Matt! Love the Chosen t-shirt even more!

@ronswoodshack3855 3 жыл бұрын

Another awesome video!!! Thank you for the content

@4321Woodworking 3 жыл бұрын

My table saw came with a CMT blade on it and I love it, been a great blade for me the entire time.

@Buffamoe88 2 жыл бұрын

Trying to start getting into woodworking....watching your videos along with several other content creators is making the process a lot less intimidating. Thanks and keep up the good work!

@pskemster 2 жыл бұрын

Great video! Great tips. Thanks for the intel!

@TheWardagh 3 жыл бұрын

Great info, thank you

@mr.b.w.3146 2 жыл бұрын

Agree with you on the drill press. bought one off a work mate, very handy tools.

@jcv200597 3 жыл бұрын

I always learn from you! I'm a basic wood worker right now. But, we an eye on the future to expand my tools and skil.

@calebstettler9136 2 жыл бұрын

Thanks for the tips. I have that same dewalt saw and it cuts great. I have an old porter skill saw that i have used instead of a table saw for two reasons. First i don’t have a shop so i can’t set up the table the way it needs to be set. Second i trust my self to make those straight cuts. Learning how to do project with basic tools builds a foundation for a master craftsman.

@mariogomez8971 3 жыл бұрын

Thanks so much for the Amazon Dewalt planner deal I've been wanting one for a while, thanks to you im a proud owner of the DW735 O yeah!!!

@redletters633 3 жыл бұрын

Great video Matt!! God bless you and Mrs 731 . You Always have great advice

@731Woodworks 3 жыл бұрын

Thanks, you too!

@chetmarcotti4953 2 жыл бұрын

Nice stuff (info) sir. Thank you for the input, this really helps. Chet

@matt5139 3 жыл бұрын

I’ve really enjoyed watching you grow as a content creator, Your videos are really looking great, excellent work, thanks for the tips and info!

@731Woodworks 3 жыл бұрын

I appreciate that!

@fishballmybaby 2 жыл бұрын

My Delta 36-425 table top warpped also. Good they had 5 years warranty. Got a new replacement at Lowes and sold it and then went for a Sawstop upgrade

@grampsoutdooradventuresdal7104 2 жыл бұрын

Good advice, nice video thanks

@rpeker08 Жыл бұрын

Great info and love your 'Chosen' shirt!

@paulmood308 3 жыл бұрын

Great video Matt!!! Good advice and content. 👊🏻👊🏻

@731Woodworks 3 жыл бұрын

👊🏻

@2wheeledgeek555 2 жыл бұрын

I bought the Bosch GCM12SD Mitre saw and a SawStop PCS, have zero regrets. I also bought that planer , and switched out to helical cutter

@d.a.berryoutdoors 3 жыл бұрын

Excellent advice Matt! Really love your videos. I have the delta contractor table saw and it does an awesome job for me.

@731Woodworks 3 жыл бұрын

Great to hear!

@LeonardoTorresMusic 2 жыл бұрын

Hey! Rocking The Chosen Shirt! I love it! Thanks for this video, I'm not quite ready to buy a big machine but this video was recommended and I thought I'd give it a watch. I have subscribed and will continue to follow your videos so I can grow as a carpenter. P.S. I love your editing man, the time travel transition was awesome! I used to do that on older videos I use to edit for a dentist. You have inspired me to get creative with transitions again. Love, Peace and Taco Grease!

@eligebrown8998 Жыл бұрын

I have a miner saw. I've had it for 4 years and love it. I'm hoping to get a table saw and a router next month.

@ishtlutz1261 2 жыл бұрын

I have seen you on KZfaq & watched a couple videos here & there.. but now that I’ve read into woodworking the past year & finally began to understand things like (what drill bits pair with what size screws/bolts, why & how to find the studs in the wall & why it’s important, how to USE my drill, why CLAMPS rule, why MDF for the most part SUCKS, & so much more..) Well now I’m finding…. that YOU HAVE A LOT OF REALLY GOOD INFORMATION & EXCELLENT / RELEVANT INSIGHT to give. You know your stuff & you’re really on point with exactly what someone who’s really seriously trying to be most effective in woodworking is going to be concerned with. Like I said at first I just sort of passed you up. But now I see that you’re just for the slightly more serious in-it-to-win-it woodworkers that aren’t playing around. I’ll definitely be tuning in to you more often. Thanks for existing. - Erin K

@zekesherrod4135 2 жыл бұрын

I have the Delta Cruzer and it is a great saw. It is heavy if you are taking it to a jobsite, but I would imaging that if you are going for a saw with zero clearance behind the saw you are using it as a stationary unit in a shop. It also has the lights that cast a shadow line rather than the laser, which is very nice as well. It was a big upgrade from the Chicago Electric.

@jburns4304 2 жыл бұрын

I have dust right system from Rockler and would highly recommend.

@micon9460 2 жыл бұрын

Delta cruzr and delta 36-725 are bad arse!! I threw a sawstop cast iron router wing on it with a JessEm lift. Really nice set up!

@freedomgunsandliberty 2 жыл бұрын

I got the hercules new model tablesaw with rack an pinion fence. I gotta say I'm HIGHLY impressed with it for the price point. The miter gauge is trash so plan on building a sled for it.

@islandwills2778 2 жыл бұрын

my first major tool was definately the table saw. It being the most versatile. Then it was the jointer. i still dont have a planer, or a miter saw but am planning on getting a planer soon.

@thingsinmyhead4189 2 жыл бұрын

I have a kobalt contractors saw. I love it! Very solid work horse, worth the money

@cplusmcretired 3 жыл бұрын

Love that shirt... I bought one as soon as I they came out with it.

@sargente7726 3 жыл бұрын

I got a 12 in Dewalt with a slide, I like it. It's funny when I use it I think about you saying how much smoother the Delta Cruzer is.

@aaudain1 2 жыл бұрын

Wonderful 👏

@rkrzyston 2 жыл бұрын

After a bunch of research AND before I saw this video, I just purchased a CMT blade for my Saw Stop Job Site Pro. It's night night and day compared to the stock Sawstop blade!!! It was nice t see that you recommended them as well!

@SaifBinAdhed 2 жыл бұрын

Thank you for the video, this is the first video I see from your channel, and god bless you, it feels natural to listen to you if that makes any sense. I will be watching this video for many times before I get started with my own journey.

@trep53 2 жыл бұрын

I had a Rigid job site table but I returned it and bought the Delta 36-725 and I’m very happy with the Delta. If you need portability get a job site saw otherwise the 36-725 or newer version is a superior saw. I also didn’t like the direct drive system on job site saws. You mentioned WEN products, I have a WEN band saw, belt/disc sander and oscillating spindle sander and I think they are very good tools. WEN tools are underrated imho. I use hand planes which I have a lot of experience with and I’m able to get the results needed to square hardwood or softwood for my projects. I buy from a locale lumber yard and some local harvested kiln dried 4 quarter and larger but power planes or jointers aren’t on my list. They can make short work of cleaning up a board but the noise, wood chips & dust is a big factor in not having them.

@LeadBariBass 2 жыл бұрын

LOVE "The Chosen" shirt! I have that in sweatshirt version.

@pmr413 3 жыл бұрын

Good video Matt. Don't forget for those on a budget to hit the used market. I bought a Ridgid TS 3650 for $350 about 10 year ago and it's still going strong.

@frankc5686 2 жыл бұрын

They hold there value. Tuned properly I can get glue line rips with a standard ripping blade. The edge literally looks like someone took a plane to it. It’s a great saw to this day for what you pay for them.

@eitzcarving3863 3 жыл бұрын

Great video!

@bullfrogpondshop3179 2 жыл бұрын

Love my DWS779!

@Atoyota25 2 жыл бұрын

Excellent video! Well made, direct, and to the point! Keep up the good work. I'll be checking out some of your other videos as well. Cheers from Tomcat Airguns & Tomcat Woodworking.

@SteadyHands2 3 жыл бұрын

Your videos help me do much, you have no idea!

@731Woodworks 3 жыл бұрын

Thank you. I’m so glad they help

@philipalvarez2561 2 жыл бұрын

Like your Chosen Tshirt !!

@LutherBuilds 3 жыл бұрын

I actually saw a Ridgid 6" Jointer on FB marketplace for $300 in my area as well as a Ridgid contractor 10" table saw for $350. It was one with the motor hanging off the back. I actually use a 113 Craftsman ts from the '70's that I bought for $75 and have since put a Biesemeyer fence on it. I have it on a mobile base and have a dust collector hooked up to it. The only thing it doesn't have is a riving knife. But I can't justify trying to sell it to buy another one just for that feature.

@troyalbert6514 2 жыл бұрын

Great Vid

@j316finewoodworking6 3 жыл бұрын

I think the drill press has always been under rated in the Woodworking community. Candle holders, shaker sets, even bowls can be done with this and enough pays for the press. But I agree, I rarely use a jointer, planer and cabinet table saw...

@dsbennett Жыл бұрын

I just happened to walk into Lowe's (years ago) three different times when they just happened to have boxes stacked along the front aisle of (1) Skil drill press, (2) Skil table saw, and (3) Skil miter saw all for $99 each. That's all I need to do lots of work.

@tobeforgottenisworsethande8995 3 ай бұрын

My first big purchase was a rigid miter saw from eBay. It's a solid little saw. My second purchase was 36 volt cordless metabo circular saw and I got a air dye grinder and wood burners for carving but my very very first purchase was carving knives cuz I'll just really like sharpening knives

@oldmarine312 4 ай бұрын

100% agree on all of it.one thing i wiuld do differently if you already have a table saw, miter saw and add a drill press. Build an oversized drill press table. not really any cheaper, but give you more stability on longer stock.

@knowledge2100 2 жыл бұрын

Thank you for the information, I am looking at the Delta 36-725t2 with the 15amp motor. Currently using my craftsman table saw built in 1978, good little work horse. Maintained it well, parts are difficult to come by. Created a saw dust chute to minimize dust. As you stated a crosscut sled is a must. This has come in very handy. Again, Thank you for sharing your knowledge and skills. Ernest🪚

@joer5627 2 жыл бұрын

I have my Grandad’s mid ‘60s craftsman. Upgraded it a bit but underpowered and lacks accuracy. Same as you I’m in need of a new one. Appreciate the video here

@derekpalmer9526 2 жыл бұрын

Awesome channel!

@Raymond-yq1de 2 жыл бұрын

I bought the Wen jointer and it's actually really good. So if your short on cash you might want to try the Wen, I also bought the Dewalt DW735x first but had touble leveling boards even with the sled.

@williame.6965 Жыл бұрын

I got the Wahuda 10" jointer and its awesome. Takes up less room than the floor models does everything i need. Didn't need a aircraft carrier jointer taking up to much room. If i need to do a long piece wood there are work arounds

@ATthemusician Жыл бұрын

I got the DeWalt planer with cart and outfeed tables only $650, best financial decision. I make guitars so I absolutely need perfectly flat boards specifically for the necks and fretboards.

@TheBizLens 2 жыл бұрын

I know its probably a long shot for some starting woodworkers, I have only started couple of years ago and I would definitely recommend or even look into projects that requires Router table setup, its absolut game-changer custom handles for drawers even to make nice edge or unique edge on some of your projects

@nhbiker1961 2 жыл бұрын

Nice video...Thanks!

@731Woodworks 2 жыл бұрын

Glad you liked it!

@dennismeyers2008 2 жыл бұрын

Miter saw, table saw, planer, THEN drill press. Thank you!

@dennismeyers2008 2 жыл бұрын

It was jet? I would have a hard time letting that go also.

@robjtko 2 жыл бұрын

Great video! Thanks for sharing your knowledge. :))…..

@MarriedManWoodworking 3 жыл бұрын

Good video Mike. See you again Tuesday night.

@731Woodworks 3 жыл бұрын

Thank you

@4windsfarmstead 3 жыл бұрын

My bandsaw is my best friend 😁

@cupofjoe2988 2 жыл бұрын

My bosch contractor table saw is really nice. I have, maybe the smallest space ever, so I can't have a cabinet saw, but that bosch works very well for me.

@ericwilliams538 3 жыл бұрын

Hey if you are on a budget and need an awesome affordable table saw. Craftsman have just brought out a new table saw and it's really awesome for an affordable price. $235.00 is about what I spent ( I rounded up a few bucks too). That's the price with tax included. The fence is great. Locks in place and I get square cuts every time.

@rodpotts6317 3 жыл бұрын

I love my Rikon 10-326 but if I was to buy one today,I would look very hard at the Harvey brand.

@steffensimmons2428 3 жыл бұрын

Love the sirt!

@731Woodworks 3 жыл бұрын

Thank you

@rob2estonia 2 жыл бұрын

Love the T-shirt!

@13daniel1974 3 жыл бұрын

Love my Cruzer...

@cleatussfmo7437 2 жыл бұрын

As a comfortable happiest, I have the same exact miter and table saws that you have. Absolutely love both of them. They can't be beat in my opinion, based on the cost of the tool.

@cleatussfmo7437 2 жыл бұрын

Same planer, too.

@cesarbernal4765 5 ай бұрын

I like this channel!

@LP5369GT 2 жыл бұрын

Thanks for this. Depending on where you buy lumber, a planer can save you a pile of money in not having to buy 3S lumber. I can go straight to the kiln dried unsurfaced supplier and buy wood for excellent prices that I surface myself.

@EAProMusic 3 жыл бұрын

You’ve been such an inspiration to me! I hope one day you do a video on how you use your jointer and planer combo. I could use the tips. Many blessings to you and your family!

@shotbydaddariosturgis357 2 жыл бұрын

That shirt is awesome 🙏🏽🙌🏽💪🏽

@DobermanDave531 2 жыл бұрын

Just tripped over your channel. ...... I pressed the button 👍😉 no bull straight to the point , a good honest appraisal Kind regards from England 👍

@731Woodworks 2 жыл бұрын

Thanks!

@danbob1650 2 жыл бұрын

Job site Saw stop is beautiful machine

@djjinerson 2 жыл бұрын

Love my skil job site 10” table saw. Came square out of the box but more importantly you can adjust the fence, and blade if it ever gets out. It rips through everything I’ve thrown at it no problem. I think it gets overlooked as it’s skil. Rack and pinion fence adjustment too. Yes there is plastic on this saw but there is on the Milwaukee and freaky too. I think vcg construction reviewed it a little while ago. But for the 299 I paid I feel like it was bargain I think they have gone up a bit since then

@groovesalad11 2 жыл бұрын

ANYONE LOOKING TO BUY THIS CMT BLADE!! right now they're having a 35% off sale on these 10" and 12" blades. after the coupon code found in the video, I got the 10" blade for $63!! what a steal!! that's like half of the best blade on the market. not trying to push this as an advertisement, but BUY THIS NOW!!!

@ronnieg6099 2 жыл бұрын

Wen makes a nice dust collector as well. They are really making a name for themselves.

@johngregg5735 3 жыл бұрын

If I invite your dad to my birthday party, will he buy me a planner? Very informative video! I started w/ a compound miter saw. I wanted to replace the base boards, door and window trim in my house, and that's the fastest way to cut it. Next came a Rigid table saw because what's a garage without a table saw. My mom got it for me after I helped her make a major move I started into wood turning and added a band saw, drill press, lathe, sanding station (disk sander & belt sander in one) and finally a small jointer and a planer. Now that I 'know' what I'm doing, I get to replace them all! (except for the band saw & drill press - I bought nice ones)

@rodcormier7428 3 жыл бұрын

Love my Delta Table Saw ... I bought the newer one .... so far we'll worth the $600 ... no complaints.... thanks for your videos :)

@ericwilliams538 3 жыл бұрын

I was looking at one, though out of my price range at the time. Plus I needed something I could carry up and down my steps. I live in an apartment building and half to do all my cutting, sanding, staining/ painting outside. It definitely sucks, but it's what I have to do for now...until I find a garage, or work shop of some sort. I went with the Craftsman table saw they just put out. Its really a decent table saw for the price. 235.00.....right around there and that's including the taxes too.

@rodcormier7428 3 жыл бұрын

@@ericwilliams538 Sounds like a good solution to your problem.... I hope you good luck in finding yourself a better work place and thanks for replying to my comment.... :)

@cullenbohannon7099 2 жыл бұрын

Just found your channel and love it so far. I'm new to woodworking and was wondering where the best place to buy lumber is as I have found alot of the wood at HD and Lowes seem to not be very straight and cracks alot

@jordanalvey927 3 жыл бұрын

Love that shirt! Love that show!! Love your channel!!! Love Jesus!!!!

@731Woodworks 3 жыл бұрын

Thanks so much!!

@davidbryanwoodworksandmore 3 жыл бұрын

Good video my dewalts are not that accurate. Kind of frustrating but I’ve put up with them for awhile. Just recently traded out for another brand. But for capacity, the dewalt is king.

@satnaamnikka6866 2 жыл бұрын

Love your work bro from india❤️❤️

@731Woodworks 2 жыл бұрын

Thank you

@paulhopkins1905 2 жыл бұрын

Freud > CMT I have full kerf rip blades in both brands for the same price. The carbide is double the thickness on the Freud, and higher quality. The CMT is a throw away blade where the Freud can be sharpened multiple times

@Shrubhumper 3 жыл бұрын

Another great video Matt, thank you for your hard work on these. Another video idea, maybe you could do a video about differences with these new CMT blades and picking the correct one for the correct use etc. etc. Just an idea, you don't have to. Just wanted to help contribute to the channel. :D Thanks again!

@731Woodworks 3 жыл бұрын

Great suggestion!

@rickyperkins232 Жыл бұрын

@@731Woodworks I have being following your planer videos now for a while and decided to pull the trigger on the DeWalt because of it robustness and it was on a super sale. I want to eliminate snipe 100% form this machine and drop in a decent helical cutter. What do you recommend?

@YoutubeAccountMan Жыл бұрын

Matt Outlaw is the best name I've ever heard

@kenny-anjanettehorn7722 2 жыл бұрын

Great video Matt! Best words were the testimony on the Chosen t-shirt. Isn’t that all of us before Christ?

@brettfaris9883 3 жыл бұрын

Thanks for the video. I got a good start on these tools. Right now I’m debating whether to get a planer or band saw next.

@tammybledsoe3718 3 жыл бұрын

Band saw!

@brettfaris9883 3 жыл бұрын

@@tammybledsoe3718 thanks! I’m so torn! I’m leaning band saw though.

@tammybledsoe3718 3 жыл бұрын

@@brettfaris9883 I guess it's really according to the type of woodwork you do. I use a lot of rough lumber so I do use the planer for some projects. I do a lot of turning on the lathe. So the bandsaw is important to me. I think the planer is wise if you do a lot of board work.

@anarablehill5691 2 жыл бұрын

I had a DWS779 sliding miter saw and returned it because of the huge amount of space it takes up. Replaced it with a Bosch GCM12SD and never looked back. Not quite as solid IMO, but the space saving was invaluable. Add the laser for $30 too... just saying.

@ChrisHornberger Жыл бұрын

Once dialed in, the Skil 6307 ROCKS. (in terms of fence squareness as mentioned around the 3:45 mark)

@garrettthomas9480 Жыл бұрын

Looking for some help deciding on a saw I’m looking at the new t2 delta or the dewalt 7491rs??

@colinbateman8233 2 жыл бұрын

I had three brand new dewalt mitre saw delivered to the job took all three out of the boxes set them up and not one could make a square cut the company I was there for said you have to adjust the saws I packed them back and sent them back if I’m spending money on tools they need to be right when you buy replaced them with hitachi and a makita experienced no issue

@joer5627 2 жыл бұрын

Agree about the CMT blades. Also, like your shirt! Oh I do have an unrelated question. I have some projects calling for 8/4 stock. Not sure my 1965 Craftsman is up to the task. Interested in your thoughts as to minimum needs in a tablesaw for ripping walnut and maple of this size? Thx.

@josepheller8395 2 жыл бұрын

Great video. I have the same drill press and would like to ask where you got the table from? I also was going for the DW 735 but got the WEN helical planer instead.

@respen43 2 жыл бұрын

Was wondering this as well. After some searching, it looks looks like a WEN DPA2412T 24 in. x 12 in. Drill Press Table with Adjustable Fence

@guybowers9094 3 жыл бұрын

Another great video Matt. How do you like the Delta mitre saw more that you have had it for a bit. I'm thinking of getting that one for my shop once it's complete

@731Woodworks 3 жыл бұрын

It would be hard to choose between the two. They are both great saws. The Delta has the advantage of space savings

@txrazor2643 3 жыл бұрын

I am about ready for a table saw.

@731Woodworks 3 жыл бұрын

Awesome 👏

@donproctor3445 2 жыл бұрын

For the Table saw if all your cutting a lot of 3/4 -1" stock you can use a smaller blade, like a 7.25 circular saw blade. Will cut faster and smaller kerf with less sawdust

@mjp8415 2 жыл бұрын

Would you recommend the Delta contractor table saw or the dewalt table saw that everyone gets? Both are about the same price these days, and I’m putting in the garage shop and leaving it so portability isn’t a big factor.