Tool box: s.click.aliexp...
Watch this if your turbo engine not making power like before and you push the gas paddle and i will show How to fix EPC warning light and P2263 error code
if your turbo engine not making power like before, you may have leaking air pressure somewhere or the turbo shaft is stuck
in my case the wastegate actuator shaft was broken leaving wastegate open and not letting the turbo build pressure
if the wastegate actuator is broken or stuck in the open position, the wastegate remains fully or partially open, diverting a significant amount of exhaust gas away from the turbine wheel. This situation leads to a decrease in the boost pressure, resulting in reduced power and slower acceleration.
🔔 Hit the bell next to Subscribe so you don't miss a video!
👨🏻‍💻 Watch my newest video: www.tubebuddy.com/quicknav/latest/UC2lUGn7VN0u3U_M4RSmjQHw
lets be friends
--------------------
/ alimech8
/ alimechusa
**If the video was helpful, remember to give it a "thumbs up" and subscribe and turn the notification bell on, so you dont miss any new videos