No video
Weasel-Off 1 - Ejection Seats
Рет қаралды 6,180
Жыл бұрынIn late 2022, Zoukei-Mura and Meng released new tool F-4G Wild Weasels right on top of each other.
This series will take a comparative look at both kits, with the ultimate goal, by the end, to come to a verdict of which one to go with if you're only pursuing one Wild Weasel.
First up - the kit ejection seats.
@Graphixman Жыл бұрын
FYI, the hole in the seat cushion is for viewing the O2 gauge in the RSSK seat pan/survival kit. Coming from a guy who used to work on them. Good video 👍🏻
@dietermuller8625 Жыл бұрын
It is always interesting, in this Case the Seats.There is the original one , then you have 10 Manufacturers, and each one looks different...
@michaelnaven213 Жыл бұрын
I was so exhausted from your last video, that I had to take a seat.😊 Actually I like your critique of parts for models, very helpful.👍
@robbie.205 Жыл бұрын
Super interesting, looking forward to the next Weasel-Off.
@andrewdunn9550 Жыл бұрын
I think you need to check how the seat fits into the cockpit. The aftermarket seat in your video looks slightly wider in the base than the ZM one. I Got caught putting an aftermarket seat (sorry can’t remember the brand but it might have been Hypersonic) into Tamiya’s F-4B only to find I needed to sand all the lovely detail off the lower sides so it would fit between the consoles. Not a big deal as you can’t see that anyway. I have had other kits where the aftermarket seat is too tall and the canopy wouldn’t fit so I always check now.
@tonydrake462 Жыл бұрын
had these issues... think it was with a tomcat a while ago - and do the same as you.
@tonydrake462 Жыл бұрын
lol - I thought it was just me who starts calling something by the wrong name and then continues to do that until the next 'coffee break'!!
@glenflanderka6504 Жыл бұрын
Nice.
@antonistsaousis4880 Жыл бұрын
Great video! Have you try to fit the MCC's ejection seat into the Meng's F-4G cockpit tub? Does it fit, or it has to be trimmed?
@DoogsModels Жыл бұрын
It's a bit wide. It can fit but you've got to take out side detail on the bottom half of the seat to get it in.
@SLICK-GLN Жыл бұрын
What about da cans ?
@leew8812 Жыл бұрын
previous video.
@SLICK-GLN Жыл бұрын
@@leew8812 bro I was being sarcastic 😃
Nikita Zdradovskiy
Рет қаралды 6 МЛН
Fox Three Scale Models
Рет қаралды 2,2 М.
造形村 ZOUKEI-MURA INC.
Рет қаралды 20 М.
Not A Pound For Air To Ground
Рет қаралды 148 М.
MM Scale Models
Рет қаралды 21 М.
PLATOKI - Scale Model Airplanes
Рет қаралды 86 М.