Welding Nissan VLSD

Рет қаралды 9,968

Bryan Miata

5 жыл бұрын

Пікірлер

@Mooseboy240 3 жыл бұрын

Y'alls music taste really kicks and this vid helped me with my 350 thanks guys

@AntonioBoosta 4 жыл бұрын

That looks like a lot of fun.

@bryanmurphy26 4 жыл бұрын

It was a very exciting time for us. Getting my sister into her own drift car was a major win.

@cheeser95cesar 3 жыл бұрын

I have my 04 G35 coupe with a welded VLSD , it was a pretty easy job and has been hanging 20k miles in . Definitely showed improvement towards drifting but is pretty sketchy for rainy days since it’s my daily .

@bryanmurphy26 3 жыл бұрын

Yeah, it's not great for daily driving. The front is always fighting the rear for grip, forcing you to choose between understeer and oversteer. I might be grabbing another stock vlsd to run in my car in between drift events, and for grip racing.

@jpyb 5 жыл бұрын

good video that blue z looks like mine lol

@driftingbrandonc.6480 2 жыл бұрын

Been using a welded vlsd for 4.5 years now

@TeamDrif-Tastik Жыл бұрын

What were the torque specs on the bearing caps

@azarelmidnight5648 5 жыл бұрын

"WD40 in my eye? Hell No!" Lol xD

@dubscrubz3888 5 жыл бұрын

You’re in CT? How much would you charge to do this on my r32? Same Diff

@bryanmurphy26 5 жыл бұрын

It's a tricky job. I'd have to charge you a Turkey grinder and a 2 liter bottle of Coke.

@dubscrubz3888 5 жыл бұрын

Bryan Miata that exactly my budget! Aha

@datboi8140 5 жыл бұрын

Does the diff clunk now? I got my vlsd welded and installed solid bushings now it clunks

@bryanmurphy26 5 жыл бұрын

It's a little clunky. Pretty normal to get some clunking. As the wheels try to try to spin at different speeds, they continually built tension on the axles, and then release it, as the tire slips in rapid succession. My sister said it doesn't bother her.

@datboi8140 5 жыл бұрын

Bryan Miata what's weird is it only clunks with the wheels on. When it's on jackstands and I let off the clutch without wheels, it's silent. With the wheels on it clunks

@bryanmurphy26 5 жыл бұрын

Oh, so it clunks in a straight line then. That's not normal. Maybe some weld spatter got on the ring gear, or one of the spider gears broke loose from the weld. Ours only clunks going around tight corners. If its clunking in a straight line, something is up.

@davislambert1605 Жыл бұрын

your flashlight is on

@mdoza9560 3 жыл бұрын

You got any howling.

@bryanmurphy26 3 жыл бұрын

No. Is yours howling?

@mdoza9560 3 жыл бұрын

@@bryanmurphy26 I didn't clean it as nicely as yall did or take any precautions. Just opened up the case and welded the holes. Locked it up but howled like a mf. I might try on another diff and see how it goes. Ill try replicate.

@bryanmurphy26 3 жыл бұрын

Once a gear set is broken in, the gears can howl if the backlash, preload, or pinion depth is altered. The gears break into each other in their original position. The Z's diff makes it pretty easy to put it back exactly as it was though.

@UdderBoy 2 жыл бұрын

Got a welder at home I don’t know how to use and a z32 I’ll let y’all know what happens 😂😅

@bryanmurphy26 2 жыл бұрын

😂

@TRYHARDMG 5 жыл бұрын

She’s gotta chill with the tight corners, she will out excess stress on it all.

@bryanmurphy26 5 жыл бұрын

We're gonna work on getting her to commit to going wider and faster at the next one. We'll be at it again this weekend for Drift Kitchen (all ladies drift clinic). We gave her some more angle too.