Welding Tips and Tricks!

No video

Welding Tips and Tricks! - The EASY Way

Рет қаралды 1,245

Күн бұрын

Learn how to MIG weld mild steel to cast steel as I show you how to transform a super common junkyard axle into the ultimate 4x4 axle.
Follow along as I show you how to take a welding process that people are scared of and make it SUPER EASY. This video will show you the intricate process of joining these two materials, exploring essential techniques, best practices, and expert tips for achieving super durable and reliable welds. Whether you're a seasoned welder or a DIY welder, this step-by-step guide is your ticket to enhancing your fabrication skills and creating an extremely strong axle that can tackle any off-road adventure.
Follow me:
• Instagram: @WarPaintOffroad
warpaintoffroa...
Music Credit:
Driving Zone - Arthur Basov
Disclaimer: This video is intended for educational and entertainment purposes only. Always prioritize safety and consult a professional if you aren’t sure about any steps. Injury can result in poor construction and modification of your vehicle. War Paint Customs LLC is not responsible.

Пікірлер: 11

@Yeeyee_jeeps 3 ай бұрын

Great info as always!

@WarPaintOffroad 3 ай бұрын

Thanks for the support brother.

@Nanan00 4 ай бұрын

If you grind on it and it shoots bright white sparks it is steel. Get a garden weed torch to pre-heat metal for welding.

@WarPaintOffroad 4 ай бұрын

Yup! That is another way to tell for sure. I’m not a fan of the garden week torch. It’s often propane and such a large flame that it can’t be accurate when you don’t want to heat certain things that are close, at least not all the time.

@ThisIsTheWay-5280 9 күн бұрын

You posted this centric BC will work with factory booster. My JK already has the J8 and I believe it is a crown. It is leaking at the grommet between MC and reservoir. Will the centric work with j8 booster or will I have to get a doctors booster again😭? Thanks

@WarPaintOffroad 9 күн бұрын

@@ThisIsTheWay-5280 I’m sorry you are dealing with that. If you are running the J8 from crown….you will have to pull it all out. Go back to the factory booster and then put on the other MC I mentioned. The issue you are having from crown is VERY common. If you are going to run the j8….it has to be Mopar or you will end up with the issue again. The crown kit is junk. I’m sure they’ll fix it eventually. But they always seem to leak.

@anthonycatrucco1433 4 ай бұрын

How can I get the 90 degree tube fix for the catalytic converter?

@WarPaintOffroad 4 ай бұрын

You’ll have to look around the internet. Lots of places sell them.

@matthewpreece6362 4 ай бұрын

What mig wire would you recommend?

@WarPaintOffroad 4 ай бұрын

Depends on a couple of things. I like to weld a bit slower. So I like a slightly thing wire even for thicker steel. I typically use an .030 but if it’s thin sheet I’ll go down to the thinner wire. EXTREMELY rarely is it thicker than .030 because of the speed I weld.

@matthewpreece6362 4 ай бұрын

And what about wire type? I purchased some Ni99 wire as I wasn't sure if normal wire would work.