Welding With The Cyclone 262 By Everlast

Рет қаралды 32,739

Жыл бұрын

Bob is back doing some welding with the new Cyclone 262 by Everlast!
Ready to join the WELD™ community? Download the app in the Google or Apple stores or Log in online at www.weld.com today! Find welding resources and exclusive or refurbished videos with details to help you get the most out of your learning. Check out awesome member discounts through our brand partners and enter to win monthly mystery boxes, listen in on our podcasts and follow our social channels. linktr.ee/WeldDotCom
Disclaimer: As an Affiliate and Industry Influencer, Weld.com earns from qualifying purchases via our posted links and affiliate links. Videos produced and made available by Weld.com or any of its affiliates, subsidiaries, or representatives (collectively, "Weld.com") are provided for informational purposes only. Although every effort has been made to provide the most accurate and useful information from sources believed to be reliable, no warranty, expressed or implied, is made regarding accuracy, adequacy, completeness, legality, reliability, or usefulness of any information. As tools, products, materials, equipment, techniques, and applicable laws, regulations and ordinances are constantly changing, Weld.com cannot and does not assume any responsibility or liability for the accuracy of the information contained herein. Under no circumstances shall Weld.com be responsible or liable in any way for any content, including but not limited to death, injury, errors or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated in a video, on a website or by other means, whether displayed by Weld.com, or a third party in its original or a modified form. All content is subject to Weld.com and any third party's applicable terms and policies. Carefully review all terms and policies.
ALWAYS USE CAUTION WHEN UTILIZING ANY DISPLAYED TOOLS, EQUIPMENT, TECHNIQUES OR PROCESSES. IF EVER IN DOUBT, CONSULT A LICENSED PROFESSIONAL. ANY RELIANCE ON THE PRESENTED INFORMATION IS STRICTLY AT THE VIEWERS OWN RISK. EACH VIEWER EXPRESSLY AND VOLUNTARILY ASSUMES ANY AND ALL RISKS INCLUDING, BUT NOT LIMITED TO, DEATH, DISABILITY, AND/OR SERIOUS PHYSICAL INJURY RELATED TO THE USAGE OF ANY TOOLS, EQUIPMENT OR TECHNIQUES OR PROCESSES IN THE PRESENTED CONTENT. IN THE EVENT OF AN INJURY IMMEDIATELY SEEK MEDICAL ATTENTION.

Пікірлер: 108

@richardfuerst5286 Жыл бұрын

Looks like my business may be looking into a 262. Thanks Bob, as always, great video!

@quietrioter Жыл бұрын

The king has returned

@noelius4481 Жыл бұрын

Great to see Bob welding on this channel again!

@Welddotcom Жыл бұрын

More to come!

@luissalguero686 Жыл бұрын

exactly what I was about to say

@arpeggi2999 Жыл бұрын

@@luissalguero686 Me too! I don't even weld!

@T3glider Жыл бұрын

But is it the real Bob? I’m thinking with that goatee it might be his evil twin.

@zacharymerritt2385 Жыл бұрын

Idk who made this happen, but THANK YOU!!! Bob and RedBeard were the best things about this channel. It's good to see Bob in front of the camera again.

@Welddotcom Жыл бұрын

Thanks we love them too but all of our hosts are great. You can learn a lot from different perspectives :)

@keiferjanz3197 Жыл бұрын

Watching Bob over the years really sparked my interest in welding. This summer i picked up a everlast 210ext tig and have been learning. Thanks for all the info over the years

@T3glider Жыл бұрын

“Sparked” … we see what you did there!

@StoneUFO Жыл бұрын

Bob is number one host on weld, so funny and informative

@cameronanderson1670 Жыл бұрын

So glad to see Bob again!

@sprocketandwheel Жыл бұрын

Bob, Welcome back..you have been missed..

@ericchild8845 Жыл бұрын

Great to see the Bob Father at it again. Always educational for me to watch and absorb as much as possible.

@baggedmazda666 Жыл бұрын

Ain’t no one mad to see bob back idk what it is about that man but he just commands the room

@ypaulbrown Жыл бұрын

always looking sharp Bob...great to see you back.....cheers form Orlando, Paul

@bigfranksworld Жыл бұрын

Good to see you again, Bob. Love to watch your videos. Give us some more!

@Goldwing1500rider Жыл бұрын

Always thankful seeing pointers on KZfaq, thanks Bob!!

@cleanmachine08 Жыл бұрын

Amateur self taught who has just spent most of my holiday break welding TIG, MIG and MMA. It makes me so happy to see Bob back. I always learn a lot, even two or three watches of the same process and dialogue there is so much knowledge to take away.

@alexg8849 Жыл бұрын

Welcome back home Sir. Always the best approach to any type of welding.

@RicardoGarcia-104 Жыл бұрын

Love watching BOB laying down those beads. Can’t wait to see him doing more!!!!

@Its-Steven Жыл бұрын

YAY!!! Bob is back!

@michaelmoats5322 Жыл бұрын

GLAD TO SEE BOB AGAIN!!!!

@CTSCAPER Жыл бұрын

Camera guy you're spot on with the arc shots in this one, and the next one. Thanks!

@codycarswell3580 Жыл бұрын

Im so glac to see bob back, no offense to anyone else but bob is this channel

@cstevenett2779 Жыл бұрын

I recently purchased an Everlast Power IMIG 230i and had them upgrade it to a AK36 15' mig gun prior to shipping. (from a 10') I am using this machine for farm repairs and projects and I gotta say that I'm very impressed with its performance! Thanks for your, to the point, informative videos!! Craig Alberta, Canada

@iainscott616 Жыл бұрын

H4 means the deposited weld will contain a maximum of 4ml of hydrogen per 100 grams of weld. The R in H4R stands for "resistant", which means the flux is extra resistant when compared to a standard 7018 H4.

@Daltond204 Жыл бұрын

Awesome to see Bob back hosting on the channel! Any plans to run any miller machines on the channel?

@Welddotcom Жыл бұрын

Eventually

@elesjuan Жыл бұрын

BOB!!!! Good to see you back in the saddle again buddy!! Hope all is well!

@1dreadyzim Жыл бұрын

The Bob Father💪🏼💪🏼💪🏼

@TempleThomas Жыл бұрын

I am so glad to see Bob back doing videos. This is going to be the next machine I put in my shop.

@StuPierce77 Жыл бұрын

Bob! Welcome back, sir. I've learned a ton from watching you over the years. Keep the knowledge transfer coming. Thanks Bob! 🤙

@richardmondor1360 Жыл бұрын

Love it!! Bob's in the house and i think i need another welding machine!!

@Welddotcom Жыл бұрын

You and me both!

@vax4200 Жыл бұрын

I see Bob, I click "play"!

@larryvollmar8763 Жыл бұрын

OK Bob you said to comment on a machine that we would like to see you do a rundown on so to speak. MTS 400. I have never seen anyone start to finish box to weld that machine. In the spring I’m going to order one and I would really love to see that machine put through the paces. I do a lot of heavy equipment repair,Arc Gouging, Farm machinery repair and general fabrication. I mainly work as a mobile welder. Will be moving into a shop for increased productivity and machining capabilities. So if at all possible could you please run the MTS 400 through its paces for us guys that are interested in them? As always love watching your videos.

@jaba512 Жыл бұрын

This man reminds me of my grandpa, has lots of same manners as he did. Granpa used to work in a nuclear reactor laboratory. 1970 to 2000s He was doing weld repairs to defective used aluminium fuelrods to be used again. Stick welding with a mechanical extension arm behind a yard (meter) thick led wall. You could not use basic dimmers so they had to use mirror or some sort of periscope to not be in the line of radiation. I belive that we dont do stuff like that anymore.

@HEFTYLEFTY303 Жыл бұрын

The man the myth the legend. Bob moffat

@MarvUSA Жыл бұрын

Good to see you again Bob...........will be watching for sure.

@philipclark6841 Жыл бұрын

I guess I’ll have to resubscribe! Glad to see Bob again.

@tomembt4625 Жыл бұрын

Good stuff, would be interested to see this machine do some spray arc or dual shield. I bet many people looking at a 250+ amp MIG machine are interested in one or the other of those.

@noisybarinavalon Жыл бұрын

I'll always stay and watch Bob! Everything else seems to exceed my tolerance limit.

@_multiverse_ Жыл бұрын

BOB!

@Joe-Mamasixtyninefourtwenty Жыл бұрын

Thats Bob Moffat. The goat

@7018dreams Жыл бұрын

Beautiful looking unit! Seems to run very smooth…thanks for the review

@Welddotcom Жыл бұрын

Thanks for watching!

@davidhoffman8072 Жыл бұрын

Sure would be interested on what part numbers to order from Edge to put the Pyrex font end on Mig Gun AK36 supplied wit tis welder.

@marcogarcia4696 Жыл бұрын

Smell them rods Bob...awesome video Sir .

@TheBoatman11 Жыл бұрын

bob is the man

@danielsplayhouse3804 Жыл бұрын

It's only good to see Bob back again always had the yearning question is do they only run test on everlast ing machines only or if the branch out to other ones in the same range like primeweld or blue demon or CK worldwide or Eastwood or weld pro would like to see those run through the paces too up against Everlast..😎

@timmoline2190 Жыл бұрын

Bob’s got a channel called let’s weld something!

@brendanmurphy2070 Жыл бұрын

They needed Bob back for views!! #letsweldsomething

@petersack5074 Жыл бұрын

HELLO, to All: Just did a price check, on this green box welder. about 1700.00 US dollars. Very good specifications. Up to 1 inch thick, welding with multiple passes....etc. It is a 240 volt input, machine. 200 amps, out for 'stick ' welding...

@Welddotcom Жыл бұрын

Thanks for sharing

@farnhamclose11 Жыл бұрын

Good looking machine.

@Welddotcom Жыл бұрын

Indeed!

@lennycruz4558 Жыл бұрын

Watching you sir from Philippines 💓♥️🧡💚💜🙂

@Welddotcom Жыл бұрын

Thanks for watching!

@electrikcrayon411 Жыл бұрын

I'm not sure if it's been asked yet....but does the gun have proprietary consumables i.e. contact tips, sheilds?

@cab8188 Жыл бұрын

h4r can be left out of the rod oven longer

@Amians-yf8um 9 күн бұрын

nice to see you here again bob i need to ask what size of generator i need to run this machine is it like 251si 45A or more ?

@LightaFire_studio Жыл бұрын

Just a question for everyone, Why choose the CYCLONE 262, over the POWERMTS 251SI? Admittedly, that Screen/interface on the on the 262 is a much better, but having the option to run Tig is is more appealing. Any chance @everlastgenerator is upgrading the MTS 251 to a better screen? I guess the lighting series is the upgrade, but a $1k+ difference. Thanks

@timothyhendershott9333 Жыл бұрын

Bob, Great to see you back. All my welders are red or blue. Have you had any experience with the Everlast plasma cutters? Thanks, keep the videos coming. Sparky

@veracitymetalworks4198 Жыл бұрын

The man bob moffatt

@thzzzt Жыл бұрын

Hmmm, now should I get one Miller Dynasty 300, or seven of these?

@victorforte1605 Жыл бұрын

Nice machine! One question the mig is 275 amps so what advantage is having the stick option? Thanks

@callen2722 Жыл бұрын

Great video Bob could you do a review on the Cyclone 312 I can not find any information on that unit, Thank you

@Welddotcom Жыл бұрын

we will air that soon

@samyrfajard8630 Жыл бұрын

The big bob

@whoknows3347 Жыл бұрын

I made a few welds....but one wonders every time we use it will it work or not

@CoopKeith1 10 ай бұрын

I tend to have to use the burn back feature. Do you use it? What time do you have it set to?

@michaelhallas6450 Жыл бұрын

How are those Everlast welders holding up , any issues ?

@clevelandmortician3887 Жыл бұрын

Let's see a some double pulse MIG.

@chadwoody3719 Жыл бұрын

Not Everlast but what are your thoughts on a klutch mp230sidv lcd, so far for me it's ran great but looking for other input on it

@skywatcherca Жыл бұрын

Sir, I have a project where I need to weld a number of angle iron (pieces) to a bicycle chain. Goofy project perhaps, but still - would you please recommend an electrical arc welder which would be sufficient for this small project. Thank you.

@Welddotcom Жыл бұрын

Please go in the weld app and ask your question on the feed and tag Bob! He will help you there and so will others 😊

@alamray Жыл бұрын

is the fan always on?

@billcodey1430 Жыл бұрын

I see Bob. Resubscribed.

@viscache1 Жыл бұрын

Most of us have the machine we need for home projects…many of us have several…but I’m tired of the 3 minute duty cycle when welding heavier projects on the farm. Implements, structural projects and heavy equipment often have 1/2”-2” plate that needs deep penetration and the welding has to be done late into the night for several hours at a time. Can you recommend a HEAVY DUTY MIG? (I’ve go monster rod welders out the ying-yang (whatever that is…my grandfather used his a lot!).

@marklugo6002 Жыл бұрын

The machine was upgraded to 50% duty cycle @ 275A. The duty cycle goes up as the amps drop. The unit has a heavier duty cycle than the competing Miller 252 and Lincoln 260. This unit at 250A has a duty cycle of 60%. 100% around 200A. Bigger machines typically require 3 phase for higher outputs. Everlast has a 312, which puts out 315A @ 35% duty cycle as well. If it's maximum power you are after with heavy duty cycle, you can look at the Power i MIG 353DPi, or the PowerMTS 400. For the 400, you'll need 460/480V to develop maximum 400A output. The 353dpi can operate on 240V single phase however at max output. Both have 60% duty cycles.

@WelderB1Family Жыл бұрын

🔥🤙🏿👨🏾‍🏭

@rwshaved 4 ай бұрын

Are the mig consumables proprietary?

@CoopKeith1 10 ай бұрын

I programmed robot welders. I'm telling you and those things will run a cycle of 10 minutes no problem. Depends on set up though.

@ForgeGiven 10 ай бұрын

😂 What does H4R mean on an E7018 electrode? An H4 designation, for example, indicates the weld deposit has 4 ml or less of diffusible hydrogen per 100 g of weld metal. Electrodes with an “R” designator - such as E7018 H4R - have undergone specific testing and have been deemed moisture-resistant by the manufacturer.

@rafaelleao79 Жыл бұрын

I don't understand inductance very well. What is the 101 explanation for it? Thanks

@thzzzt Жыл бұрын

Inductance happens when a current flowing thru one conductor generates (or induces) a current in a nearby conductor. This happens without the conductors actually touching. An inductor can be implemented as a simple coil of wire. An AC transformer is basically a pair of closely-spaced coils (inductors). Inductance is relevant mostly only to AC circuits (not so much DC).

@ypaulbrown Жыл бұрын

@@thzzzt Thanks....

@Welddotcom Жыл бұрын

go in the WELD app and the community and hosts can help you

@benjaminfridley8330 Жыл бұрын

Would you run some gas shielded fluxcore thru that thing at some point?

@martyhill6609 Жыл бұрын

Probably should talk about the Duty Cycle more. These Everlast welders don't like running on max amps. They get hot quick and you need to stop for a fairly long while, otherwise it trips early in the Duty Cycle. I use the same AMP welders by different makers and don't have that issue. So I only use the Everlast on low amp jobs.

@joelyounger Жыл бұрын

I haven't experienced that with my Everlast in the slightest

@martyhill6609 Жыл бұрын

@@joelyounger Your probably welding on low amps. You wont reach the Duty cycle on low amps.😕

@replyhere590 Жыл бұрын

Which input are you using, 115 or 220? Lots of stories and comments about the dual voltage welders just not liking 115, even to the point of affecting reliability.

@Diyguy518 Жыл бұрын

@@replyhere590 I ran both my 200e and my current Cyclone 212 on 120v without any issues, honestly they were both surprisingly powerful on it. I now have 240v in my shop, been running my 212 almost daily, and I haven’t had any problems with it at all. The only thing I’ve found to complain about is the powerset.. imo it’s way off, especially when you get to the settings for thicker metals. I only use powerset for the one time repairs I get, so it’s not a huge deal, but it would be nice if it could be updated or something.. I’ve heard of Everlast sending boards to customers for repairs, I’d be fine with swapping a board out to have the powerset working properly. Other than that, I’m glad I chose Everlast! I got all the features I wanted for a hell of a lot less than a red or blue machine!

@kwmiked 8 ай бұрын

Would this welder mig 1in ar400 wear bar on a Excavator bucket?

@kwmiked 8 ай бұрын

Comeback over

@PrincipalityofZeon Жыл бұрын

I'll stick with red

@labradorshalladore4966 Жыл бұрын

Richard, I like my bacon crispy. With over 30 years of experience, my hearing is fine, I don't hear my bacon clearly on this machine. Please send me this machine to test in person. True evaluation is a requirement before making an assessment. (Also, Richard at the beginning of this video you made some adjustments with dial and button this machine never did any corrections. Thats interesting.

@dickmick5517 Жыл бұрын

I had one Everlast product. When it failed it was impossible to get it repaired in a timely manner. Customer service was months behind. The heavy welder had to be sent half way across the country for service. Shipping would have been expensive. I purchased another (blue) welder as their was no way I could wait that long to get it repaired. Junked it and never looked back.