👇WeldTube Store👇 www.weldlife.com

In your videos can yall show what the root pass looks like on the back end of the plate?

Man... y’all are the best! Thanks to your tips I won a welding competition! Much love for y’all !keep uploading videos🤙🏽

Thanks alot sir for the teachings it has been helping me a lot. I am a welding student based in Cameroon and presently at 4G i have been following your teachings from 1G till now. Thanks alot for you have been a source of inspiration to me

Rosendo, I owe you big time brother for this welding vid - I changed up my root pass technique to the one you use (side to side) and reversed grip on the stinger (the way you hold it) and my quality of 4 G Welds SMAW shot up literally in an instance. Thank you Mate! Alex, New Zealand

I wish I was able to do this online but it is such a technical thing. Once schools open, Imma try this to prove that I have been learning.

Nicely done! Very well explained! Thank you! Be blessed guys!

This is my channel, baby. Great teaching. Greatness. Thanks. Got an overhead test for tomorrow. Bout to go in prepared now. Thank you.

Shoutout all the guys at WeldTube! You guys are some of the best welders out there, and great guys in general.

Thanks alot sir for the teachings, i have been able to use your techniques to better my skills in school

Great demonstration and explanation Rosendo 🤘🔥 Semper Fi Brother.

I'm in school rn and I just went up to over head moved up from vertical bevel this video is great has a lot of information

This video helped me before going in for a welding test.

Thanks a lot. Any one can develop their wedding knowledge. Good job my friend.

Big help 🙏 been practicing in my garage with my old man his 75 old school welder but sometimes we bump heads lol then we chug a beer about it love you pops

Very good video well explain. Keep making more videos

You’re use of the word standby motivates me

Thank you for sharing this video overhead welding

Thank you sir,it help me a lot.Good day and God bless.

You have a nice weld there. And I love your welding max

I need to get out of my current welding school and get into this one. Damn it, man.

Love it good pass root welding very well done.😊😊😊

Rosendo! I was scrolling through utube and u popped up. love ur work bro.

great refresher guys thanx 😁👍

Going to a good cause, good job guys.

good stuff thanks for the tips!

Awesome video!!! Just what i needed. Thank you!

Don’t have much right now but I did what I could. God bless

Thanks for your videos that you share us its very helpful on us ... Thank you ....

You guys will be rewarded for doing God's work!🙏

Watching this makes me want to make KZfaq videos these guy struggle with so much but they get the job done.

Thanks so much it's very help me

taking notes! 👍🏼😲 good shit bro you explained so much this video really helped out a lot.

Ya'll doing great job 👍

Great tutorial bro!

GRACIAS POR COMPARTIR ESTE INTERESANTE VIDEO. SALUDOS DESDE HOLLYWOOD FL , USA.

I love how easy yall break it down. I just got into a school for welding and our certs will be 3-4g and if we pass those we do 6G if we fail they put us down to 1 and 2 so im watching all yalls videos i can. Also i was wondering if yall could show a 6G with Stick. I notice yall have Mig and tig but no stick

I love this lesson

Thanks

Video came out badass

Bro you explained it so well 💸💸💰

Tnx bro,,,,it's really good way to good weld!!

Nicely done! Very well explained! Thank you

Si señor muy buena soldadura

I really like your vedios keep it up

When I would mig 4f fluxcore 045 I always burned through when I stayed but the rest of the weld was beautiful and had penetration, our test was on some thin ass plate too. Can’t remember the size but I still passed even though they wanted to fail me. I retook that test 3 times and still had the same out come blew through at the start perfect the rest of the way. I like 5F the most so simple. I worked at Trinity Rail

Sempurna👍👍

Cleaning and visually examining the penetration from your initial root pass on the back side of your plate is a great method of checking for lack of fusion, incomplete tie ins, and the amount of convexity of your root pass. I noticed that you neglected to mention any of these points in your video.. Didn't hear any mention of the recommended rod angle that you are using during this demonstration. Is your 7018 fill rod a 1/8th or 3/32nd electrode. However, you did cover a lot of great points in your video especially for folks starting out.

Great video… ok…nice root…ok…ok

Nice one brader

Soy de panama hacen buenas obras los felicito

I like your video it's good....

I run the dollar bill gap (1/16 for those that don't know) with feathered edges. I run my root at 120 amps while the stick is at a 45 degree angle. My roote come out perfectly but it's my fillers that are killing me because of the inconsistencies I keep having

Respect in Morocco 💙❤💪

Magnífico

Big up WT👌🍁

Perfect 👍😍

Thank u sir

VERY VERY WELL. GREETINGS FROM CAMPECHE, MÉXICO.

Should I be at a certain angel when welding over head and is it bad to push instead of pulling because I notice myself getting out of place once I’m mid ways down the weld I gotta test this Friday and I’m just wondering if it bad to start off pulling and end off pushing

Hi! I would like to ask you ,where I can buy welding mask like your?Thanks!

Thanks for the video, teachers. Is the current AC or DC? 🙏

perfect Bro

I’m taking this test at a factory nearby and I haven’t don’t this type of welding in about 3 years lol I’m nervous

My weld test has a back and doesn't allow grinding wheels or wire wheels. What techniques do I use for the root pass with a back plate. Please get back with me before tomorrow. If not then dont worry about it

Where did you buy that welding jacket from?

I would like to know why you chose to use the 6010 electrode for the hot pass. Is there an advantage to using the 6010 instead of 7018 electrode?

Great show to learn from! Maybe FR clothing ? industry requirements !!!

My instructor is making us use 7018 for the root pass

Weri good welding

Serious question, why did you not use stich method on root pass like 2g and 3g

I'm glad you made this video but for demonstration I would rather you hotpassed 7018 instead.

this dude is definitely giving a hip pocket class 🤣

Whats a good welding machine to practice welding at home put on pipe i bought a cheap one but doesn’t work what’s a good machine for home welding to practice on pipe

This account has helped me so much but how on earth do I not catch on fire on overhead no matter what I wear

Can’t find link on my phone to donate

Awesome.. and i have a ❓, don't you get any puddle drops on you face that way? Or how do you avoid the puddle drops? Thanks and all I've learned, i learned it watching your videos guys.. From Michoacán Mexico saludos

What is the brand of your welding mask??

You are majaro am so happy capit up very good lecher

Teachers teachers achievers

For the root must electrodes thinner?

I’m school I would always do 66-68 amps for the root, everyone else always used around 72-75 amps for there root and still got it I could never get it the key hole would open up to much and if always blow through that’s why I always ran cold and now seeing you do 85-95 blows my mind. What do you think I was doing wrong that I couldn’t control my root and how can I fix it? Thanks in advanced btw

Bro, i didn’t see your root pass both side. Did I miss or didn’t you show? Please 🙏 I was waiting for see your root pass upside

watch the opening if you whip it rod to the left look at the gap to the right

Seems like I wasn’t the first 50 to donate. Think I was a little late watching this video

Hello, i'm having a hard time seeing the weld puddle when pulling when doing the 7018 fill and cap. Any suggestions?

Maybe its just my machine, but I can't keep my rod lit with less than 100 amps with 1/8 rod. It just goes dark few movements in...

Great thing to donate. God bless amen. Appreciate the videos.

Can you please explain what you mean when you say clean all of the “trash” out of the root?

Quick question, what is the price of your school?

You didn't show us what your root run looked like on the reverse side (cowboy welder)

Thank u. Just 1 question. How far in do u push the rod, like a 1/8? Cuz if u go too far it put the weld out

Can I use 7018 for root pass?

How about the root pass is it zigzag?

How long are the plates

The Greatest Leader In The World!! #legend #royalty #AARON

My welding prof is super against using anything other than whip and pause during 6010 root pass 4G. Ill try the side to side tomorrow.

I wish you guys had a darker video of the welding. So it’s easier to see the motions. Also a pic of the just completed pass as well as the backside of the plate.

Please show all roots

watch the opening , you whip it to the left look at the gap to the right