What are Volts? Amps? Ohms? Watts?

Рет қаралды 101,913

Жыл бұрын

As electricians, it is important for us to understand the fundamentals of electrical theory. In the latest episode of Electrician U, Dustin walks us through Volts, Amps, Watts & Ohms.
🤘⚡️MEMBERSHIP⚡️🤘
JOIN ELECTRICIAN U - become a member and get:
FREE Continuing Education every year
FREE Practice Exams
FREE Monthly Video Courses
FREE Weekly Live Instructor-Led Classes
FREE Monthly Educational Newsletter
Premium Members-Only Content
Private Discord Channel
Monthly Members-Only Discord Chats
Sign up here --- www.electricianu.com/electric...
🎧🎹MUSIC AND VIDEO:🎹🎧
/ descantmv
🎬✍️ART AND ILLUSTRATION:✍️🎬
www.daverussoart.com
Let’s start off with Volts. In an electrical circuit, voltage equals pressure. Low pressure = lower voltage and high pressure = higher voltage. A good analogy to use to try to wrap your head around things is water. Voltage is the same as how hard the water is coming out of the water hose. It can also be called a difference in potential. So, when measuring voltage with your meter you may be able to read 120v or 240v in residential applications or up to 480v in commercial or industrial applications. In electrical calculations, Voltage is written as V or E.
The next term we should cover is Amperage. While voltage is pressure, amperage is current flow. Again, this term is directly proportional. Lower amperage = lower current flow and higher amperage = higher current flow. Going back to our water analogy, amperage could be thought of as how much water is flowing, not necessarily how HARD. In electrical terminology, amperage is written as A or I.
Resistance is the next term to discuss. Resistance is opposition to current flow. Everything electrically that we use has some form of resistance in it. From a light bulb to a vacuum to a television and so on. The interesting thing about resistance is that it slows down current flow to a rate that is usable. Without some form of resistance, the current flow would be so high that we would short our circuit out (this is what happens when we take our load out of a circuit and hook the hot wire straight up to our neutral. BANG!) in electrical calculations resistance is written as R or the omega symbol and is measured in Ohms.
Lastly, we will talk about Watts. Wattage is how much power is being consumed/expended. The lower the wattage the smaller the load is. Take a light bulb for instance. A 60w lamp is not as bright as a 100w lamp. But it’s not just confined to lamps. Every piece of equipment has a wattage rating; toasters, vacuums, tv’s etc.
These simple terms can also be used in conjunction with one another to find one that is missing. Basic Ohm’s law. So, for example, if you knew what voltage your equipment was operating at and how many amps it drew, you could use the Ohms law formula of voltage x amperage = wattage.
We hope this has been helpful in understanding some of the basic but most common terms of electrical theory. Is there a topic you would like to see discussed here on Electrician U? Leave a comment in the comments section and let us know. Please continue to follow Dustin and Electrician U as we are constantly updating our content to assist our followers in becoming the best electricians that they can be.
#electrician #electrical #electricity #watts #ohms #volts #amps

Пікірлер: 235

@givemebackmypurse.6894 Жыл бұрын

I have a degree in Engineering and this explains things way better than any of my professors did.

@nathangilbert1344 Жыл бұрын

It's amazing that anyone can read a sentence 100x times, they can practice it, apply it, and teach it. Yet they have no fundamental understanding of the forces at work. It is awesome that you are an engineer. Thank you for your service. What type?

@givemebackmypurse.6894 Жыл бұрын

@@nathangilbert1344 I am a Mechanical Engineer for GE Aviation in the Blue Ridge Mountains of NC. I'm thinking about teaching a class or two at night at the Community college here. They are looking for a PLC and Industrial wiring teacher but I think someone could save a semester of school by just watching your videos.

@nathangilbert1344 Жыл бұрын

@@givemebackmypurse.6894 That's really cool. I highly encourage you to take that position. I think a lot of the problem with modern education is too many tenured professors. Part time people who are working in their respective fields while teaching are worth the cost of the class. They give you pertinent industrial information and actually know what's going on. They aren't just speaking from a 10 or 20 year old perspective in fast moving industries.

@IsaiYuno Ай бұрын

It is a little embarassing that you are an engineer and you don't know how volts amps ohms and watts work...I would not want you to work in my company

@mrwhiteandnerdyboy Жыл бұрын

I spent 3 months in the Navy learning circuit boards for computer systems and how to manipulate the electrical flow. This video has actually helped clarify that training even further.

@BOREDANDWELLBORED Жыл бұрын

Which one can kill a insect faster, "72v dc 15watts" or "20v dc 15watts"? I think the 72v because it has more volts but I'm ignorant.

@tatum8499 6 ай бұрын

I was an aircraft electrician in the Navy and my only job was swapping out parts and sending them off to be fixed. I really appreciate this video because it helps me explain my job better and feel more confident about the knowledge I gained and experiences I've had.

@iva4856 8 ай бұрын

FYI: At 5:16 you use a new term "inductor" but do not define it but expect the watcher to know it and thereby potentially stop the watcher's understanding of the material from that point.

@leotexas3485 Жыл бұрын

I was a 1 year, part-time apprentice, today when I fully understood the differences between "Volt Amperes" and "Watts". :D Thank you for this video!

@ZackestTV Жыл бұрын

You take as long as you want to explain these things. Best explanations I've ever listened to. Thanks.

@Samessin06 Жыл бұрын

You are a phenomenal teacher. I’ve literally never heard this explained so well and all the descriptors and analogies were perfect!

@ElectricianU Жыл бұрын

Well thank you my friend!

@BOREDANDWELLBORED Жыл бұрын

@Electrician U no one answered me properly. Which one has more energy, or can kill a insect faster, "17 volt dc 15watts" or "20v dc 15watts"?

@ZackestTV Жыл бұрын

@BOREDANDWELLBORED well they have the same power. The difference is that the higher voltage lower Amp version, would back a heavier punch in more concentration I'd assume. Depends on the curcumstance I suppose.

@galenmarek8287 Ай бұрын

@@BOREDANDWELLBOREDthe watts only represents the load being used at that time. The amps are at 72v =4.8 amps. At 20v =1.3amps. So technically the 72 volts would be more dangerous due to having a higher current flow.

@joshuaquintero4552 Жыл бұрын

Was learning about this in class last night, great timing my man.

@ecospider5 Жыл бұрын

Thanks for the explanation of volt amps. This is the first time I understood the difference between VA and Wattage. Now I need to go study reactance since it might make sense now.

@raymond3722 Жыл бұрын

Waking up and see my morning lesson all ready and waiting for me.thanks D

@stevedavies7509 Жыл бұрын

Oh my! First let me say that when you started the video and you explained who this video was for… It was definitely me! This was the best teaching I have heard in a long time. It’s a complicated topic and you taught it in a way that did not embarrass people because of the difficulties. Amazing job! I wish you were my rabbi!

@Badger350 Жыл бұрын

Genius explanation. I’m so impressed with the delivery. Your translation of science is motivating curious minds and educating. Bravo….Bravo

@justingibson7025 Жыл бұрын

These videos keep getting better and better. Thank you bro !

@erikdaelectrician6102 Жыл бұрын

The more you understand this topic the easier it is to understand the code and more complex topics.

@georgegonzalez665 Жыл бұрын

Great videos. Get better and better. Thank you for what you do. Keep the videos coming brother🤘

@clarenceeverline5654 Жыл бұрын

Love the simple explanation.Thanks Dustin

@88spaces 7 ай бұрын

I never thought I'd need to know this stuff but with everything being battery powered and me not knowing anything about it and wanting to ramp up your videos help a lot.

@Kelz174 Жыл бұрын

Thanks Bro for all that you do! You Inspire me to keep pushing to become an Electrician.

@milenmetodiev9294 4 ай бұрын

Really good job ,well done thank you so much. Наистина добра свършена работа, много ви благодаря. FROM BULGARIAN MAN.

@jimmylanders2175 Жыл бұрын

Great explanation! Your a good teacher. Thank you!

@paulhunter8486 Күн бұрын

Super helpful, thanks for taking the time to make this.

@lav8378 8 ай бұрын

Thank you so much for your explanation to all beginners. The ways, words you tried best to can make all of us understand easiest.

@niconine268 7 ай бұрын

Thanks for the clarification. Helps tons

@sjohn74 Жыл бұрын

Im a new apprentice, about a year in and I'm learning and retaining a lot. I absolutely enjoy this field of work. My biggest hurdle is understanding 208v, and 277/408 and I cant find anytthing online to brea kit down better, and my Journeymen is explaining it but im just not grasping it.

@Mike_Rundle Жыл бұрын

They’re different potentials based off the transformation done. 3 phase requires including the square root of 3 in calculation. 120/208 = 120x1.73=208. 277/480 = 277x1.73=480. It’s a bit more complicated than this but this explains where the voltages come from to an extent. Let me know if that helps any.

@sheran6819 7 ай бұрын

I am in auto electrical which has started yesterday . You are very informative, hilarious and I can comprehend.

@marvelteraoat Жыл бұрын

awesome explanation! I never understand it clearly until now even with the water analogy. GOD bless you man

@diytoolbox9016 6 ай бұрын

you had some great analogies, you're a good teacher, this is helping me a lot with understanding amplifiers and speakers, because all 4 variables determine how good a speaker/amplifier is, which is amazing to think off, as a kid we always only thought "oh yeah, more watt more better", certainly not true.

@JAYTAYLORJAY Жыл бұрын

This was helpful. I'm able to understand how to apply it now.

@tylerdennis9423 Жыл бұрын

these videos are the best im a new apprentice with no school and feel like bing watching these videos i know more than people that went to school

@michaelmassetti3126 Жыл бұрын

It's nice just as a refresher. Great job.

@ShrimpTechStocks 6 ай бұрын

Dustin you are a superhero. You will deny this title by default because youre not a trash ass human. thank you for this whole channel man.

@holidayrap Жыл бұрын

Thank you!

@skipwilson5086 Жыл бұрын

I've got a question now. I have a 10Hp AC compressor motor. I need to make it variable speed. What would you recommend to do this, a , VFD, a pot? what and why please. I appreciate you explaining the internals of a breaker box, the how they skip over each other, or only connect every other one is what I needed to know. Much thanks for that.

@Matt-kr2es Жыл бұрын

As always, excellent explanation. Been working with electricity a long time and studying it…..still find useful information and ways of thinking about electricity in each and every video you make. I have “stolen” a lot of your electrical descriptions when helping new maintenance staff understand and work with electricity. Keep up the good work.

@Crazypug-eh7xi Жыл бұрын

Love the breakdown.

@seanmendez5838 Жыл бұрын

Love this!!!!! Good video good breakdown.

@rudytroy1844 9 ай бұрын

You are 100 percent correct it depends on the application of the circuit such as ceiling fan circuit sound system such as entertainment system intercom security system video surveillance dishwasher washing machine dryer

@Iloveguns Жыл бұрын

I just wanted to thank you, I passed all my assessments to become an electrical apprentice and I really owe it all to your videos. I really appreciate it bro, you’re the man!

@ecospider5 Жыл бұрын

Volts being the pressure pushing an electron forward Amps is how many electrons are being pushed. So when getting shocked I would much rather have just one electron hit me with 10,000 volts than 1000 electrons hitting me with 240v.

@dcgo44r Жыл бұрын

Better analogy!

@tonymagona334 5 ай бұрын

Well your analogy does make sense when you consider static shock can be many thousand volts, sometimes even 10kV. Hurts like a bitch but doesn't kill you (unless you have a sensitive heart or pacemaker then good luck).

@ecospider5 5 ай бұрын

@dandon1105 With chargers for a laptop it is voltage that will cause damage. The amperage will just cause it to charge slow if it’s too low. If the amperage is too high it won’t matter. Amperage in this situation is available amperage. So if the laptop is designed for a 3 amp charge and you give it 10 amps it will just take the 3 amps it needs. So voltage must match. And polarity of the voltage matters. Almost everything is center positive now but there are 1 in 1000 which are center negative. Give a center negative laptop a center positive charger and you will probably get smoke. :)

@renemarquez7947 Жыл бұрын

Thanks again bro 😎👍🏽

@Imustfly 11 ай бұрын

Anything but a clear explanation. I particularly appreciated the "runners and cows" thing. Totally clarified, Ohms,...um,...impedance,...um,....resistance,...aw never mind.

@DrunkDuckXD 5 ай бұрын

Awesome video, thanks, finally starting to make sense

@CopeBUILT Жыл бұрын

@ElectricianU - i'm building a small heated paint storage room in an unheated garage. Think of a space 4x8 x 9' tall with some shelves, and a door, insulated walls. I want to install a heater. Oil Filled electric space heaters run at 120 volts, consume up to 1500 watts, and put off a set amount of BTU's. There are also 4 foot electric base board heaters, that lack the thermal mass of the oil filled electric radiator style that come in 120 and 240 volts. I found your video as I searched for information on "higher voltages, consume lower amps, and are cheaper to run." But with electric heat, I got the impression that a watt of energy in, regardless of whether its 1 leg at 120 or 2 leg at 240, will produce the same BTU's. And instead of drawing 15 amps on one leg, I'd just be drawing 7.5 amps on two legs, and thus wind up with the same bill from the electric company at the end of the month, and I have to give up the thermal mass of the oil filled radiator if I go to 240. BUT, i have the sense i'm missing something. Can you go more into depth on how this works with AC voltage, and amperage, and how that relates to creating BTU's with electric heat, and the Kilowatt Hour Draw and expense? I love the geeky math stuff. Thanks!!

@pimpdaddy1469 8 ай бұрын

I think you did great and explaining volts amps and wattage plus resistance😅😁💯 I did watch it over and over but as to memorize what you were saying Great job 👌🏽👍🏽

@JonathanSilvaTX Жыл бұрын

Love your videos, I’ve been finding them very helpful. Crazy that you’re right here in Austin too.

@Sparkie075 8 ай бұрын

Dude, you are a phenomenal teacher. If you so desired you could easily teach at a university using these YT videos in your portfolio as your teaching prowess. All that might be needed is a little brushing up on the higher "maths" (if you have to), though the act of teaching it would have the same effect. I'm sure there's more control over your life and time via social media though, although that's probably a time consuming hassle in it's own right.

@ErickUtley Жыл бұрын

Perfect!

@stoyang Жыл бұрын

I was wondering if you could do a video on low voltage systems like you would see in yard lighting. Specifically AC ones, like the one I have :)

@robertallen3133 Жыл бұрын

Thank you..... Great video ! Happy Friday.

@fredresource2661 Жыл бұрын

Excellent!!!

@John-zz5gt 7 ай бұрын

Thank you

@brianmcdermott1718 Жыл бұрын

Great info.explained. Thanks Justin.

@alwaysfreedom9354 6 ай бұрын

In the 70s, just out of high school, I built a two-bedroom home with my own two hands. The only power I had was a temporary pole that was supposed to be just for running power tools while building the home. Everything worked for many years. I put a window air-conditioner in for one of the bedrooms. Plenty of power for everything. All on a temporary pole that was supposed to be just for building the home. I sold that home and there is a family living in it now. I paid cash for my second home I did not build myself. Years later, I built what amounts to a cabin on the edge of a national forest. It is one-room with no indoor plumbing. I put one line in from the pole that was for the water well pump, to the cabin. Converted to 120, of course. It powered everything great. Including a small air conditioner. And a 240-volt welder. Recently, my radio started buzzing and a TV that only plays old movie video tapes, started having lines across the screen. My brother and I went back to the cabin for hunting season. And there was no power at all. We converted the welder plug-in to 120 volts. And ran a new line from the pump house to the cabin. I have not used that welder in decades. I made a utility trailer with it. That worked for a while. Now, I only have enough power for two overhead lights, and a fan. Nowhere near enough power for the air conditioner. A man from the power company said the power going into the meter is OK. He even took the time to look at my wiring on my side of the meter and said he saw nothing wrong. Obviously, he had to be careful because he was not responsible for anything on my side of the meter. And was going beyond his job as a power company employee. But he told me he could see nothing wrong with the wiring. My only real problem now is that the fan works, but the compressor does not have enough power. The air conditioner keeps going off when the compressor kicks on. During hunting season, I do not need air conditioning. But I want to do some fishing in the warm months. I do not understand why the power worked for decades. And now I have problems. I have a generator I got for power outages during and after hurricanes. But it would be a waste of money. All that gas.

@lkkota41 Жыл бұрын

Appreciate for all the videos you have put.. I am taking classes at community college and your videos are very helpful. Wish you were my instructor :) at college

@IgnorantArrogant Ай бұрын

Thank you sir! This helps me understand more about electricity 🙏👌👍

@carlosrodriguez-ub4sv 10 ай бұрын

This is a great video!

@scotthughes7440 Ай бұрын

My first class!!

@turrubiartes21ify Жыл бұрын

Love your videos thank you for the sketches and putting all in simplest terms!! I have a question 🙋‍♂️ please educate me on this. Thanks in advance. Let’s say you open a electrical box and find some oxidized copper conductors in the breaker and ground terminals? What happens when conductors oxidize ? Do they stop having continuity ? Could this be a hazard to the conductors it self, meaning they will heat up more and create a fire hazard? Will the energy bill be higher. Thank you ! God bless

@t-jo85 7 ай бұрын

If when looking at ac and DC through a spectrometer DC has a wider peak and bottom space than AC. So when you said ac is up and Down and DC is "constant" why does it look similar to ac but with a wider gap of peak and decline? I'm just confused? Does that make sense?

@jamesmcalister813 Жыл бұрын

I kind of love how you "simplified" it. I think maybe there were a lot of side points, but electricity is good like that. Shit takes time to actually understand! 🤣 Appreciate the video!

@Mcmusic2020 Жыл бұрын

Hi, I wonder if can you explain the electrical load balancing. Thank you

@lumberjack7923 Жыл бұрын

BEST DAMN EXPLANATION IVE EVER COME ACROSS !!!!!!! NOW IT IS CLEAR. !!!! Im going to watch this a couple times THANK YOU !!!!!!!!!!!!!

@ecospider5 Жыл бұрын

There is resistance in batteries. This resistance is what controls the maximum current you can get from a battery. A 1970’s AA alkaline battery has way more resistance than a new lithium AA battery. This is why you never put new lithium batteries into 1960’s electronics. The circuit was designed with the resistance of the battery helping keep down the current. If you put a lithium AA into a 1960’s radio, too much current will go through the radio and might destroy some components because they will overheat.

@efzauner Жыл бұрын

yes to internal resistance of batteries, but the internal resistance is small compared to any external load. When designing circuits, it is usually the no load battery voltage that is used to calculate current draw. Any internal resistance of the battery will just reduce current flow and voltage.. I cannot see how a lithium batteries of the same voltage as alkaline will harm a circuit. I would like to see examples of this.

@supremegaming6837 Жыл бұрын

will there be anymore electrical videos on electrician u? I’m in va and there is no course section for me to use and i liked the videos

@Crazypug-eh7xi Жыл бұрын

Outstanding

@michaelc1042 5 ай бұрын

Well done my friend, well done

@rebel.mma.youtube 7 ай бұрын

I think we need examples. Like from an angle of if u building a battery what u need to consider for safety and power etc Coukd u make such a video? U best one u come across. But it still a little on jargon side as total beginner. Thanks

@arnold0007 8 ай бұрын

Thanks

@joshuawilson1989 Жыл бұрын

I've got a tool trailer question 12v I've got some bake lights and signal lights but no running lights I have a nice klein tester but cant find the problem?

@samroot1876 Жыл бұрын

The hydraulic analogy is nice, but I think going back to the physics definitions can help. Voltage is the energy per unit charge, or Joules per Coulomb. How much can each electron potentially do? Amps are Coulombs per second. How quickly are electrons whipping thru. These two definitions make it very clear how Voltage times Amperage gives Power in Watts, or Joules per second.

@ikerivers1795 Жыл бұрын

I like this one much better. Straight to the point with relevant definitions AND makes the introduction of power factor much easier to comprehend. Kudos 👍🏻👍🏻💯

@zman5015 Жыл бұрын

Hey Dustin question, if I test voltage (potential) between two wires both of them are 120 volts when I put multimeter to test voltage between two will it show 0 because it is the same to so there is no change in potential or will it show 240 because that is what it would be combined

@southtowntn Жыл бұрын

That depends on if both points of reference are the same phase or not. For residential you typically have a single phase (split phase) 120/240v service. Line 1 (L1), Line 2 (L2), and Neutral (N). L1 and L2 are each end of the transformer secondary winding and N is a center tap of that same winding. L1 to L2 = 240v L1 to N = 120v L2 to N = 120v Neutral is the center of the winding from end to end, so it's half of the winding potential (voltage). Side note, the reading on the meter is the RMS (Root Mean Square) voltage and not the actual peak voltage which is around 177v. In the case of 3 phase 120/208Y, you would get line to neutral of 120v but from any line to line get 208v for example. That is because the phases are offset by 120 degrees. 120v × √(3) or 120v x 1.717 Other 3 phase services you can a "stinger leg". I won't try to explain it here but you might see something like this. L1 to L2 = 240v L2 to L3 = 240v L1 to L3 = 240v L1 to N = 120v L2 to N = 208v L3 to N = 120v This may not have answered you question exactly, but maybe gave you some info to further research it. Dustin has videos on this that can help explain some of it with drawings.

@zman5015 Жыл бұрын

Thanks I think that helped alittle

@MrIsaacpr7 25 күн бұрын

I’ve been scouring the internet for the following question and I get mixed answers: When measuring for amperage on a 220v circuit that only has two 110v conductors, do I add the amperage reading on both conductors together or do I only use the reading on one conductors to know how much amperage my pump is drawing? I’ve been told that I must add both readings together because both are live wires but I’ve also been told that I only need to measure one because they both cancel each other out.

@jeremyparker7859 Жыл бұрын

Quick question, if the voltage on my multimeter is jumping around, like on a welding machine, how do you know correct voltage?

@jaymark7777 5 ай бұрын

Awesome bro

@DrunkDuckXD 5 ай бұрын

Me running track: Crashes into cow: Me: "Fuck!" *gives off photon*

@joshcowart2446 Жыл бұрын

The resistance conversations sounds like pvc connections in plumbing. Most plumbers get out their glue and cleaner and glue their pipe together. Well technically it’s primer and solvent cement used to make a solvent weld. So some will say that in the same way as you refer to impedance

@SandCruzer6 Жыл бұрын

Question; Can you do a video on "Ghost Voltage"?

@weldonpinder7295 10 ай бұрын

I can't find the merch store In the description. Can u show me please

@coinquest24 Жыл бұрын

Are you still working? Do you have a crew? Would be interesting to have a series on the business/ becoming a contractor

@charlesross6112 Жыл бұрын

hello eu...big fan, learned a shitload from u..have a question...im doing a complete rewire of a multi family building including a new square d 100 amp panel...the existing service from the pole comes into the basement and goes into a big silver box with a big lever...if i flip the lever it kills power to all the meters and panels...my question is, do i have to bond the ground and neutral in the new box considering its technically not the 1st point of disconnect...the silver box has no breakers in it, it jus kills power to the whole house

@4BFL11 Жыл бұрын

Ah thanks for clarifying watts. I know what watts is but idk the meaning of it. We are at Intermediate 2 resident course of ohms law.

@xaverbishop6506 Жыл бұрын

Me maestro! Teach me great master! I wish you were my mentor in field operations.

@rty1955 Жыл бұрын

I chuckle the way electricians that work with AC try and use DC formulas. As a EE for over 50 years. I always chuckle at Electricians screw up simple terminology. His graphic of reluctant & resistance are both impedance is incorrect. Impedance is the RESISTANCE at a particular frequency & voltage. Resistance is purely linear. impedance = resistance at a certain frequency. Once you change frequency the impedance is no longer the same. Take a look at resonant circuits. If you measure the resistance with a meter, and think that would be the same over any frequency, you would be dead wrong. A watt is considered power. In a DC circuit a watt is calculated by V*I, not so in an AC circuit. As wattage is AVERAGED by using formulas to calculate RMS. Think of it this way, as AC voltage rises and falls during its cycle, if you were to calculate the wattage at a particular time in the wave, you would see the wattage calculation changing, therefore electricians cant use the term wattage, the correct term is Voltamps (VA) which is simply volts * amps. But VA is NOT the same as wattage. Its just simpler to use VA. BTW 1 watt = 1 joule per second

@jackhofalot6705 Жыл бұрын

He explained the difference between VA and watts, even though for calculation's sake, their values represent the same thing. He explained "wattage" refers to something that "gives off energy" like Lights, heaters, motors. something expels the energy. He explained VA as something that uses, or stores, that energy. Pretty much anything other than lights, heaters or motors.

@tedlahm5740 Жыл бұрын

Thank you for the EXPLANATION that in AC circuits the watts change during the CYCLE . (60 cycles in North America) Hence the term VA. as in 60KVA and 120KVA. You are the first teacher to actually state this difference. roy yung

@martf1061 Жыл бұрын

Thanks for the explaination of VA vs W. If 1W = 1 J/s , does that mean that with AC, each cycles represents 0.01666 Joule ? 60hz

@rty1955 Жыл бұрын

@@martf1061 how did you arrive a that number? PF?

@tedlahm5740 Жыл бұрын

roy Yung. Where does REACTIVE power come into the mix when discussing VA, if at all? Thank you. Very informative paragraph. Making the connection to RMS makes the subject very clear. 240V RMS being a peak voltage of about 339.46 volts.

@terrenceo9688 Жыл бұрын

Would the resistor be how many amps a certain device or product is rated for?

@sergioflores3118 2 ай бұрын

Good afternoon. Im about to change my career as an electrician. I’m about to take a course next month to better prepare myself with basic electrical skills, this program is thru MassHire. Do you provide entry level videos that would help me become an electrician. My short term goal is to become an apprentice. Thank you for all your videos. They mean a lot to me.

@Pain1969KILLer Жыл бұрын

Here is a head scratcher for you. Well, I should say I'm scratching my head so hard, I've got a bauld spot...LOL! I have a ton of wires (low voltage) on second floor in an apartment going to a Flair motor that controls the heat valve to open and close. the original two wires that were hooked up to the motor are only giving a few volts (around 6). So, the motor stopped working. I tested every transformer in the building they are all putting out the correct 24 volts. I tested a bunch of the wires and a green and blue gave me 24 volts. So, I connected them to the motor, but unfortunately there is no power at the thermostat. There have been a few mice problems in the buildings and I'm now wondering if the wires to the thermostat got chewed. Anyway, I really need to figure this out because my tenant is driving me crazy about how hot it is in the apartment, and unfortunately he doesn't know how to open a window because it's only 45-55 degrees outside in the day and around 35-40 at night. FML

@rogerpenske2411 Жыл бұрын

Outstanding class once again, Professor! Again, watch the language. Also, take a cheese grater to those tats, or wear a checkered suit jacket with elbow patches, and get yourself an S shaped tobacco pipe from your local tobacconist. Dan, Lori real professor

@bstevermer9293 Жыл бұрын

A wire across a car battery will melt . But I I place a tiny bulb in the middle it works fine. Both the wire and bulb are resistance . One works the other melts the wire ????

@beotheguitarist Жыл бұрын

Guys, if the resistor slows down current, why is it when you take an amp reading on the hot and neutral you get the same reading? For example, if a motor is drawing 3 amps on the hot wire and 3 amps on the neutral, how is the resistor coming into play? I'm just trying to learn. Thanks!

@jackhofalot6705 Жыл бұрын

Simple answer is that you never take an amp reading over a neutral. They are technically the "same wire" with a load connected between them. The way it was explained to me is that the 0 reading is because the current on the hot is the same as the current on the neutral, same phase, so they 'cancel out' on the meter. If you clamped across say 1 hot from circuit A and 1 neutral from circuit B I cant be so sure if they would cancel out, as the loads would be different.

@JadyGrudd Жыл бұрын

So in the Newtonian sense volt-amps are potential, wattage is kinetic?

@Raven-cf5qd Жыл бұрын

Nah im confused if i have 2 lights connected to the same positive wire if one light lowers the amps then how can it power the second one?

@alohava Жыл бұрын

I've been following Electrician U for years and I still don't fully grasp this concept. For some reason it's tricky for me. I am slowly figuring things out.

@milanpetrovic8929 11 ай бұрын

impedance and resistance, the egg and the chicken paradox. Here is a google dictionary "impedance noun the effective resistance of an electric circuit or component to alternating current, arising from the combined effects of ohmic resistance and reactance."

@davaughnyarde8970 10 ай бұрын

Hey man, I don’t know if you’ll ever actually read this question but maybe someone in the comment section will be able to answer it for me I am wondering why you corrected yourself at the 10 minute 54 second mark…I’ve re-watched a dozen times but I still think you were correct using resistance to describe the heating element instead of to reactance