What You Need To Weld Lead. Including How Too. And Gauge Setup

Рет қаралды 46,192

Күн бұрын

In this video I give a detailed description of what you need to weld lead.
Including bottle turn on and gauge setup. Also I give a detailed decription and show an example of how to weld lead using oxyacetylene.

Пікірлер: 141

@leeedwards3783 Жыл бұрын

Wish we had you at our college. We all burnt right through the lead. Top man

@slbleadworks Жыл бұрын

Sounds like your flames were way too hot. Didn’t the instructor help out at all ?.

@leeedwards3783 Жыл бұрын

@@slbleadworks no they didn't. Was very disappointing

@harrytheroofer7443 Жыл бұрын

I did the LDA course about 20 years ago, but don't think they ever mentioned the pressure used.i could burn the flat on a bench, but didn't have the confidence to burn in situ. You mentioning 0.4 bar has helped immensely, I had the oxygen on at about 2.5 bar and used to blow holes in the work. I've just done 3 47 degree welds and no holes. Thanks for your advice.

@slbleadworks Жыл бұрын

No worries mate I’m glad my vids have helped and thanks for watching.

@chrischapman1522 2 жыл бұрын

Brings back memories, First year appreice plumber. 1971 I loved working with lead.

@slbleadworks 2 жыл бұрын

I still love it too. It’s very satisfying. I also love taking pictures etc so I can always look back.

@error404m Жыл бұрын

The portable kit, the bottle key, the model O torch....it's all coming back to me. I was doing lead welding for a living almost 20years ago.

@slbleadworks Жыл бұрын

Are you still in the trade now ?

@error404m Жыл бұрын

@@slbleadworks I left the UK and do something totally different now. Last time I went back to the UK, I went to my old work place and tried lead welding again to see if I could still do it. Turns out I still had the muscle memory. Didn't do a bad job at all (code 4 butt welding).

@anthonymycroft1145 Жыл бұрын

Very informative video. Am looking to get some lead welding tools soon and learn how to weld. Will keep an eye on your videos for advice and tips. Keep up the great work.

@slbleadworks Жыл бұрын

Thank you I’m glad you enjoyed the vid. And thanks for watching.

@antonyhibberd8824 Жыл бұрын

Great video. Good explanation, which gives me the confidence to give it a go! Thanks.

@slbleadworks Жыл бұрын

Thank you. Please let me know how you get on.

@garybowers2629 3 жыл бұрын

Love your vids by the way please keep them coming

@slbleadworks 3 жыл бұрын

Thank you. I will do. I have lots of stuff in the pipeline.

@craigporter6001 Жыл бұрын

Amazing video just orderd a kit coming monday didnt have a clue where to start especially for pressures ect thanks liked and subs

@slbleadworks Жыл бұрын

Thank you I’m glad you enjoyed the vid and thanks for subscribing I really appreciate it. I wish all the people that watched the vids would do that. I hope you enjoy your welding kit and please let me know how you get on.

@bendavison8779 2 жыл бұрын

Very skilful work and very well explained .

@slbleadworks 2 жыл бұрын

Thank you

@m.harris9512 Жыл бұрын

Brilliant ! Very informative thank you

@slbleadworks Жыл бұрын

No worries. Thanks for watching.

@TheDickPuller 2 жыл бұрын

Done loads of Lead Burning years ago & miss it. Lads, don’t waste your time on anything but proper Oxy/Act set up, it’s the only way to go & you’ll improve your skills enormously with the right gear. With your pressures etc as Stewart has stated. A great tip I was given as an apprentice Plumber; to gain confidence, melt a pool in a scrap piece of Lead, play with the Pool & see how the Lead reacts to various sizes of flame in a Pool. I’d be a bit rusty now, but would love another big Lead Job, great in the Summer but not in a Scottish Winter!!! At one time you could buy 6mm Lead filler rod. Which was really handy.

@slbleadworks 2 жыл бұрын

Couldn’t agree more. You really do need to get a oxy acetylene setup.

@richardjones3112 Жыл бұрын

Fantastic.What a skill.

@slbleadworks Жыл бұрын

Thank you

@glennhuibers949 11 ай бұрын

Thankyou so much for this video ! Nice and clear information im gonna practice this :-) Thankyou from the netherlands

@slbleadworks 11 ай бұрын

No worries thanks for watching. I’m glad you’ve found this useful. And hope it helps with the welding practise.

@petercrossley1069 Жыл бұрын

Very useful. Thank you.

@slbleadworks Жыл бұрын

Your welcome thanks for watching

@RS2KSX 2 жыл бұрын

Just a quick tip, I’ve taped my hoses together every 12” to keep them together so much easier to handle

@slbleadworks 2 жыл бұрын

Yes defiantly. The mistake I made once was using cable ties. Not good for the hands.

@foundthetruth2003 Жыл бұрын

Excellent thank you.

@slbleadworks Жыл бұрын

Thanks for watching.

@sicknote26 Жыл бұрын

Top stuff 👏

@slbleadworks Жыл бұрын

Thank you

@sicknote26 Жыл бұрын

@slb lead works every time I go to do what u do it gose tits up lol

@jackmoore526 3 жыл бұрын

Good stuff

@slbleadworks 3 жыл бұрын

Thank you. I’m planning on making a close up and maybe a slow mo vid on the welding next time.

@gazlife7963 7 ай бұрын

Thanks for that bud

@slbleadworks 7 ай бұрын

Your welcome thanks for watching.

@jamesward5721 Жыл бұрын

With everything, there's always a "Left Field" option - I've welded since I was a kid & still weld professionally, except I weld steel. For the heck of it, I decided recently I wanted to learn to weld lead - just for fun, nothing to do with making money. Roish,.,, so "conventional wisdom" says you need gas bottles to run wire for welding steel - I no longer run gas bottles, here's all flux core now, every machine - the cost savings have been absolutely phenomenal. Insane - with the Upside Upside being none of us would bother our hoop going back to buying gas. Flux core does everything we need. So what's the "Alt" version for welding lead? How do you do it without getting raped by the gas-bottle companies? Not too many answers to that one tbh - everyone uses gas bottles, oxy/fuel. There has to be an "Alt" right? The "Alt" is surprisingly built by Snap-On - the tool truck guys. They sell 2 torches that run straight butane/propane - the Torch 300 & the Torch 400. No oxygen required, flames perfect for leadwork, the tools are durable & built to do a days work. So what is the "Flux-core" version of welding lead? A Snap -On Torch 300 or 400, that's what. Yes, of course, you need to buy fuel gas - but that's cheap, easy & readily available - you however do not need to buy commercial oxygen - which is where the huge savings come in. They are the "Left field option" if you intend doing this just for fun - I.E they take mastering, but work.

@slbleadworks Жыл бұрын

The snap on torch 300/400 definitely look like they would be hard for lead welding. Ideally you want a fine flame that only heats up a small area. Especially when you start welding uphill etc. A cheap lead welding alternative would be the Pro Gas 5000 If you didn’t want the expense of renting gas cylinders.

@moyle298 3 жыл бұрын

Thanks great tutorial. I have the same porta pack size, how long on average do you change your bottles?

@slbleadworks 3 жыл бұрын

Thank you. I normally change the bottles every 2 months. I have a spare set. This way I can run them down to completely empty.

@theorutherford8026 Жыл бұрын

Hi mate love the videos. would you recommend doing lap welds on back gutters and front aprons? I was taught to do them with butt welds but I’m wondering if lap welds would be better?

@slbleadworks Жыл бұрын

Thank you I’m glad your enjoying the vids. I personally have always lap welded everything. I think it’s just because it’s the way I was taught. And it doesn’t matter which way around you do. And you should just do whatever you find the easiest.

@harrytheroofer7443 2 жыл бұрын

Neat work old sport, can you explain where to direct the flame when doing vertical welds, back sheet or front sheet first? I'm not bad on the flat, but lack the confidence to attempt vertical in situ. Thanks, Harry.

@slbleadworks 2 жыл бұрын

Thank you. On a vertical weld I direct the flame in the middle. So where the second sheet laps. If your struggling on vertical have you tried starting from the top. Come down. And then back up from the bottom to create the strength and thickness of the weld. So much easier.

@harrytheroofer7443 2 жыл бұрын

@@slbleadworks Thanks, I'll give it a go in the workshop in the yard.

@garybowers2629 3 жыл бұрын

I'm about to go on a training week and was considering propelyne or propane as ust easier to obtain and cheaper is there any advantages to using acetylene in you opinion?

@slbleadworks 3 жыл бұрын

To be honest I’ve only ever used acetylene. But I’ve never had any trouble getting hold of it

@carljanisewski 2 жыл бұрын

Cool

@slbleadworks 2 жыл бұрын

Thank you

@michaelflint4159 3 жыл бұрын

Must you have a welding set. Is there any way to do it with a propane torch similar to a plumbers soldering kit?

@slbleadworks 3 жыл бұрын

I think the propane torch would heat a area that’s too large. For lead welding you need a much more precise flame. You can buy oxy turbo welding kits that are much cheaper than the more traditional oxy acetylene.

@str3pur3123 3 жыл бұрын

Step by step exact measurements the lot back apron for a chimney

@TheJudgejay 3 жыл бұрын

What do you think of the little turbo welding kits bud? I can’t seem to get the flame set right on it, your flame looks very tame but still very direct

@slbleadworks 3 жыл бұрын

I’ve got a oxy turbo set too. To be honest I don’t use them as the flame is much more fierce. It heats up a greater area. Although I’m led to believe you can get them now with a model o torch fitted. I do however like how light they are. They can come in handy some times.

@TheJudgejay 3 жыл бұрын

@@slbleadworks ahh yes exactly that! I’ll look into that, thank you

@yorkshiresfinest6102 3 жыл бұрын

Your subs are growing 👏. Can you tell me where I can buy the bottle holder what you use all I seem to find is the one's for the bigger bottles

@slbleadworks 3 жыл бұрын

Thank you. It’s creeping up slowly. I just want to keep the vids coming. Yes I got the bottle cage from Boc. I get along better with these ones. The ones with wheels on are a lot heavier and much bulkier.

@ericmckinley368 2 жыл бұрын

I would like to start lead welding, I have an old building that requires a lot of lead and would like to be able to turn my hand to doing some myself. I plan to take a course to teach me the basics. Can you recommend a good kit with gauges that I could buy in the UK. Many Thanks.

@slbleadworks 2 жыл бұрын

I would recommend getting a genuine model o torch. They sell these at the welderswarehouse.com I would also say get multi stage regs. I have victor edge. Although you can get by with single stage and these are a lot cheaper.

@stanleytomkins1369 Жыл бұрын

I must admit your videos are good, back in my time you didn’t have this the closest was an monthly magazine addition from British lead mill. Can you lead burn up side down? Can you do herring bone weld?

@slbleadworks Жыл бұрын

Thank you. Yes Everything is online these days. I’ve only started this channel just over a year ago. I’m hoping it will grow over time. I just need to keep posting content. And also obviously hope that people will watch them. Also the comments really help. Thank you. I’ve never attempted herring bone welding.

@stanleytomkins1369 Жыл бұрын

Watching you makes me feel young again, I do miss it very much, it is a true skill,keep at it, it’s not easy, heavy work and in all types of weather. It’s no joke working in drizzling rain, worse weather you can work in, with the wind blowing.

@cdav123 3 жыл бұрын

Keep the videos coming mate love lead welding I have a little turbo90 set with model 0 I have fitted. Obviously on my set I have no regulators to set bar pressure how does this effect things as I see you get yours to 0.4 bar ? I never seem to get the flame to a little ball or feather shape it’s often more of a point is that down to pressure you think ? Cheers mate

@slbleadworks 3 жыл бұрын

I would have a pointy flame if I was using the gas for cutting. You say you have a model o torch. Have you a number 3 nipple fitted?. I would think if you can’t get a rounded ball it must be down to the pressure.

@cdav123 3 жыл бұрын

@@slbleadworks yea number 3 tip . I get a tidy ish weld but find as I can’t get nice ball you have to watch not to burn though . Might invest in a little trolley set I think . Cheers

@slbleadworks 3 жыл бұрын

@@cdav123 well worth investing in a set with gauges. You can get your pressure bang on. And also you’ll know how much gas you’ve got left. Nothing worse than running out half so you can’t get finished

@cdav123 3 жыл бұрын

@@slbleadworks 👍👌

@cba1424 3 жыл бұрын

@@cdav123 Hi Mate I'm still learning but picking it up. Lots of great vids from SLB 👍I started out with a set similar to the oxy turbo but I believe with propane you don't get the rounded flame as you do with acetylene. It was doing my head in why my flame was different haha

@marklittle6675 Жыл бұрын

Hello pal , love all your vids. I’m just new to lead welding . Si when I’m I’m doing a run the little domes look ok but when they cool down the middle sinks and leaves a little hole in the top of each one . What am I doing wrong? Cheers.

@slbleadworks Жыл бұрын

Thank you for watching the vids and I’m glad you like them. It sounds to me that your going too quick and /or the flame is too hot. If you slow down a little. Then wait for your last droplet to cool down. Then place the next drop half way on the last. Probably where it is used to sink and a hole appear. Let me know if this helps.

@marklittle6675 Жыл бұрын

@@slbleadworks ok thanks I’ll try that. The set I’ve borrowed is the same as yours but it has a number 2 nozzle I can only get a small pointed flame and not the round ball on the end do you think this is not helping or does it need a clean or nothing to do with it?

@slbleadworks Жыл бұрын

@@marklittle6675 a really pointy sharp flame won’t help. The number 2 nozzle should be fine though. Yes try giving it a clean or even buying a new nozzle. I got mine from the welders warehouse. Although of course there are plenty of other places to purchase them too. Also play with the pressure on your regs. I have both of mine set at 0.4 bar.

@marklittle6675 Жыл бұрын

@@slbleadworks nice one for taking the time to reply pal it’s much appreciated. Keep up the good work👍

@martinwinlow Жыл бұрын

Given the agro for the DIYer in getting hold of acetylene, what are the professional's views of very easy to obtain oxy-propane kets for lead welding? Intrigued to see no flux being used...?

@slbleadworks Жыл бұрын

I think with those kits it’s best to go for the ones that have the model o torch installed. And yes no flux is used or needed for lead welding.

@worldofstrings Жыл бұрын

Awsome man! Is lead less expensive than aluminum? I'd like to learn that method of welding.

@slbleadworks Жыл бұрын

Thank you. I’m not sure to be honest I’d say lead is probably more expensive. The scrap value defiantly is.

@mmroofs 2 жыл бұрын

I don't think we have the "Model O" here in the USA, Could you recommend a similar setup available in the USA.

@slbleadworks 2 жыл бұрын

I’m sorry but this is the only one I know off. Could you not get this shipped to USA ?

@mmroofs 2 жыл бұрын

@@slbleadworks I will try to ship for sure! Love your work !

@slbleadworks 2 жыл бұрын

@@mmroofs Thank you.

@mal310 2 жыл бұрын

Stuart, what is good practice to weld a chimney apron Sir, butt weld or lap weld? Subscribed, thumbs up and spreading the love of lead :)

@slbleadworks 2 жыл бұрын

Thank you for subscribing. I always do lap welds. I just find it so much easier.

@yorkshiresfinest6102 2 жыл бұрын

Hi , Can you tell me why I'm only getting the weld to set to the top piece of lead when I'm practicing. I'm scraping the lead both pieces . Thanks

@slbleadworks 2 жыл бұрын

It’s probably because your flame is too cold. Or your holding the torch too far away.

@yorkshiresfinest6102 2 жыл бұрын

@@slbleadworks thanks for your reply. How do I make the flame hotter.

@slbleadworks 2 жыл бұрын

@@yorkshiresfinest6102 you turn up the acetylene so the bright tip in the middle goes bigger. Then turn up the oxygen to make the nice bright feather like ball

@yorkshiresfinest6102 2 жыл бұрын

@@slbleadworks thank you 😊

@leemcgowan7986 2 жыл бұрын

Hi Stuart how to i welt lead together like a vertical seem. Doing a doomer. The cheeks. Thanks lee

@slbleadworks 2 жыл бұрын

Hi Lee. I would usually use 600 wide lead. Starting at the front of the cheek mark out for your 600 wide lead on the dormer cheek. The first measurement you take is the front corner. So from soffit to where it meets the slate/tile. Mark this measurement on your lead 25 mm in. This will be to welt the jamb to the cheek. You then take the back measurement of the panel. Same rules apply. Once you have your makes cut from point to point on the lead. This will give your angle. Then simply fold the 25 mm in to a square. Then next panel is similar. But the measurement is 50mm in. Also make sure you fix copper in the welts

@leemcgowan7986 2 жыл бұрын

@@slbleadworks thank you Stuart. For that

@chriscollins1704 Жыл бұрын

I've been trying with the oxygen turbo kits that you get down the merchants. Seems a bit unstable to me. Sometimes I can get it to work, sometimes not. Is it me or are they just rubbish?

@slbleadworks Жыл бұрын

To be honest I’m not a fan at all. The one I had was very basic and it didn’t have a model o torch fitted. It was so much harder to use than the setup I’ve got now. I personally would try and stay away from them although I do think they have got better now. I would say if you do need to go down this route make sure it’s the one with the model o torch.

@chriscollins1704 Жыл бұрын

@@slbleadworks yes, it's a torch with replaceable nozzles. Numbers 1 to 4. I can't change the torch because pipes are crimped on, not a nut type. I've got to do some welds tomorrow. If it doesn't work I'm just going to get the setup you have

@slbleadworks Жыл бұрын

@@chriscollins1704 it sounds like a similar one to what I used to have. Oxy turbo 200.

@chriscollins1704 Жыл бұрын

Yeah, sounds like it

@chriscollins1704 Жыл бұрын

Yeah, sounds like it

@danny39uk 2 жыл бұрын

From where can I buy a welding kit like this please

@slbleadworks 2 жыл бұрын

I would recommend welderswarehouse.com. They sell the genuine model o torch. I got that from there and then purchased victor regulators elsewhere. I can’t remember where. But just Google it. Although the setups welders warehouse have got are pretty decent.

@justyjust Жыл бұрын

Can you patch repair old 100 year old lead with welding?? Cheers

@slbleadworks Жыл бұрын

You can but it’s usually extremely hard. I had to repair 100 year old lead a few months back. It was very hard to patch repair.

@benrichards1 Жыл бұрын

Hi mate. Any advice on a cheap kit to buy? I'm in the building game, but not a roofer, and I'm doing my own loft conversion. It'll cost me a small fortune to buy front aprons and saddles etc online, so a little kit to allow me to do it myself would be great. Doesn't have to be mega expensive, it's only for mg own house. Dont want some cheap sh*t either that breaks. Cheers pal

@slbleadworks Жыл бұрын

You would probably be better off buying an oxy turbo kit. Just make sure you get the model that has the model o torch. These kits are hard to use as it is. Especially if you’ve never done it before. I would usually steer everyone away from these but it’s gonna be your cheapest option. As if you go down the portapack route It will cost you around £600.00. So you would actually be better off getting a lead worker In.

@benrichards1 Жыл бұрын

@@slbleadworks cheers

@user-ge6rq9hn4i 4 ай бұрын

One is oxygen and what is in the other bottle ?

@slbleadworks 4 ай бұрын

It’s acetylene. Thanks for watching.

@rosstituteuk 3 жыл бұрын

Thanks for the video. Glad to see you wearing gloves when handeling the lead. Out of interest, how many minutes of use would you get out of that small acetylene bottle ?

@slbleadworks 3 жыл бұрын

I’ve got the small acetylene bottle. The size is a k. That usually lasts 1 to 2 months i would say.

@rosstituteuk 3 жыл бұрын

@@slbleadworks how often do you use it? i'm trying to get an idea of how many minutes / hours of constant use you could get out of a single bottle...

@blubbernek4477 9 ай бұрын

How uch mm hoze u use?

@slbleadworks 9 ай бұрын

6mm will be perfect. Thanks for watching.

@blubbernek4477 8 ай бұрын

thnx, you'r welcome,Ordered a model o 3 days ago in the UK, now I hope it will arrive in the Netherlands this week, hope it worked out. nice video's, @@slbleadworks

@babbapappa1 3 жыл бұрын

Hi Stuart, so I'm starting to get a grip with welding lead (thanks to vids like yours)it's not pretty yet and definitely NOT stacking dimes 😂 but I'm finding the metal flows and amalgamates better when I use a light coating of plumbers flux as well as scraping off the top coat of oxidisation. Is there a reason why absolutely nobody posting lead welding vids on KZfaq uses flux? Thanks in advance Paul.

@slbleadworks 3 жыл бұрын

Hi Paul keep up the practise and you’ll get it in no time. To he honest I’ve been in the trade for 26 years and I’ve never known or heard of anyone ever using flux. Maybe your onto something lol. To be honest it shouldn’t be needed,especially if your cleaning up your welding rods etc. Sorry I can’t be of more help. But I’m under the impression flux is more for pipe work etc.

@babbapappa1 3 жыл бұрын

Cheers Stuart and thanks for doing the vids they are a massive help 👊🙏

@DSherrattRoofing Жыл бұрын

Nice uniform lead burning mate. I’m fine on the flat. It struggle with vertical welding. I know the correct technique but can’t seem to stop the lead running away from me. Can you recommend where to buy nozzles. Hardly anyway sells them off the shelf so I buy them on line and more often than not, they are cheap Chinese rubbish and badly engineered giving a crap flame.

@slbleadworks Жыл бұрын

Thank you. I’m going to be making a dedicated welding vid soon and I’ll be doing some vertical. I buy my nozzles from a company called The welders warehouse. They are decent nozzles on there.

@DSherrattRoofing Жыл бұрын

@@slbleadworks great. Thanks. I don’t wanna put u in a pedestal or anything but Like many others I’m blown away by your skill at work. My dad was a lead worker to your kinda standards but he died before I could learn the more intricate stuff. So ur videos are extremely helpful. Keep it up fella.

@leeedwards3783 Жыл бұрын

What's the cost of that little set up

@slbleadworks Жыл бұрын

From what I can remember about £500.00

@leeedwards3783 Жыл бұрын

@@slbleadworks thanks for the reply. Thats not too bad

@kieranardaen-webb9913 Жыл бұрын

Where you based mate?

@slbleadworks Жыл бұрын

I’m based in Brighton. East Sussex.

@kieranardaen-webb9913 Жыл бұрын

@@slbleadworks random. I’m peacehaven. Need some lead work doing on a extension at my house, something you’d be interested in having a look at?

@slbleadworks Жыл бұрын

@@kieranardaen-webb9913 possibly it depends what’s involved and how quickly you need it doing. You could send some pics my work insta if you like

@PeakyBlinder 2 жыл бұрын

Left handed eh, Snap.

@slbleadworks 2 жыл бұрын

Yes

@MoronicAcid1 11 ай бұрын

Leads got such a low melting temperature you could probably just use a soldering iron. Also, do you enjoy brain damage (no respirator)?

@slbleadworks 11 ай бұрын

Thanks for watching

@PeakyBlinder 2 жыл бұрын

Dump boc ripoff and go hobby weld

@slbleadworks 2 жыл бұрын

Is hobby weld cheaper than boc ?

@PeakyBlinder 2 жыл бұрын

@@slbleadworks you just pay a 1 off deposit and you own the bottle, You just pay for the refill. Like boc used to be. Charging rental is a joke.

@slbleadworks 2 жыл бұрын

@@PeakyBlinder thank you I’ll look into it. The rental with boc is quite expensive.

@PeakyBlinder 2 жыл бұрын

@@slbleadworks yea mate we used to have about 10 sets at the yard cost a fortune, Been using Albee for 2 years saved a fortune. Check out there site for local suppliers. They deliver as well . Good luck. Maybe one day boc will wake up. I know a lot of lead workers have left boc behind now. They used to have a monopoly on gas and oxygen but not no more.

@PeakyBlinder 2 жыл бұрын

@@slbleadworks and when you return the bottle if no longer needed you get your deposit back .