This was huge! I couldn’t re calibrate to save my life. Until he showed how to get out of diagnostic mode. Then after holding the start button I was able to run the recalibrate process. Thanks!

Worked like a charm!!! May God Bless you for saving people a lot of money for a repair man!!! THANKS

a repairman came to our house and did this exact thing and charged us $100… glad i found this.

You my friend are the real hero! Thank you!

thank you so much i had no lights to see codes but was still able to turn dial for diagnostic and then lights came up ! i thought it all began with over size load and spin cycle along with blowing a fuse for lights. seems to be working now thanks again!!!!!

Can you help me find the book showing the codes? I bought this washer used, and having several issues with it.

Wow! It finally worked. You’re right it’s all about the timing. Thank you. FYI I have a whirlpool whirlpool wtw5000dw1.

This worked perfectly and fixed my problem! Thank you so much! Very helpful! :)

The calibration cleared a grinding sound that was emitting from our MAYTAG Washer model: MVWC465HW. Just a reminder to end the Diagnostics Mode after calibration to return to normal operation (long press on the Start/Pause button). Many thanks!

Thank you so much for this video. This helped me so much after I replaced my washplate and drive hub kit.

Thank you so much!!!! Blessings. 😀

Washing machine wasn't completely filling, just soaked clothes. It's a HE Whirpool. My wife did the calibration without any clothes (first tried it with clothes and didn't work), and now we're running an empty cycle just to make sure it's working.

Thank you...helped a bunch!

Thank you been trying to find a way to fix my same washer it only works when it wants too

I have followed the steps to recalibrate I have done this before after I replaced a part on it and it worked but now after I recalibrate it and I try to wash a load of laundry it goes straight to agitating the load instead of putting water first I have recalibrated it 4 times now

What if it will not calibrate?

Would you happen to know why when I do this test none of my diagnosis lights come on except just the rinse all the time

I have Maytag MVWX655DW1 washer I ran the diagnostic and found several such as onDrain Spin Wash Done are flashingPower Wash all are flashingClean Wash Sensing is flashing and SpinSoak All FlashingCold Rinse Done are flashingI have some more what could be the problem

P.s I have popped out the center hub,Undone the bolt. But the strainer is not wanting to let loose. Did your strainer come out easy or did you haft to pry it out. It feels like mine is being held in place by something Still? Its a Maytag Centennial MCT Model MVNC555DW0 TYPE 589-01 SERVICE TAG C53640845. What's frustrating is when I go to Maytags websight its not even pulling up there own Model number or service tag.Just says this model is discontinued and cant find much on this unit. There are some videos but not many with this model. It lasted a year and a half...When trying error diag codes.. All my lights blink orange, Under spin Sensing is orange, Rinse Is Orange,Done is not lit. Under Drain and Spin All 4 lights blink orange. I have tried to calibrate the unit as well.

Hi , i have combo Maytag washer and dryer .When i press start botten the solenoid opening water in the second i take my finger away from start botten it's stop working please advise Thanks.

And if the lights are orange instead of green? Replaced actuator, water valves and Gear Clutch..Still sensing light goes on, waits, makes noises, goes off, over & over. Tried different bulk wash, since it quit on Normal. Had to hand rinse clothes, water still standing in it..

What web site did you find the error codes meanings

Where can ya find the codes? The online version?

Someone who knows. Hi. I am a technician in Australia I have a customer with a Maytag mat20mn (I think) it’s not letting hot water in on hot settings cold only then maybe a few seconds of hot at the end of filling. Not enough to even make the water warm. After a conversation with tech support I replaced the main PCB and recalibrate . After that it filled with cold water only, about 30 second later it pumped out and turned off. Tech support in Australia said they don’t know what’s wrong and cannot help. Any thoughts? I am unable to contact tech support in the U. S. I just get redirected to au site.

can you enter the calibration diagnostics mode if the washer has the sensing light on? Mine will not leave the sensing mode even after unplugging it for a long time.

Tyler. My washer bottom would spin or slip and spin during spin cycle. Now all 5 lights blink in succession from right to left. HELP!!!!

Where do i find the meaning of the error codes or to read them for my Maytag bravos mtc ? I have no digital display so it the light blinking after i run the diagnostics i get the sensing rinse and done lights blinking

Thank you

Hi my sons Maytag Bravo has the with rinse and spin , when we tried the code in is blinking Yellow on the Spin light 😅

What websight are you on to see that code chart?. I been looking for 2 hours and cant find that layout. Thanks

what does it mean when ALL lights light up (except lid lock) and blink twice & repeat?

Is there a site where I can view the error flashing codes? Can’t find mine on the washer

I get the led light sensing, rinse, spin, done and the done light. So is that a 4 blink then 1? What code is that?

WHAT do the various flashing lights mean. I get 2 - it fills well with one item, barely fills with 2" with 10 items

Two questions.....1) How do you recalibrate a newer model Maytag MVWX700XL2, after replacing the actuator (It shows the error codes on a digital screen). I can't seem to find instructions to recalibrate a newer Maytag after a repair. 2) I've done everything to remove my Maytag Bravos XL washer pulsator (some call it a washer plate)...it won't budge. It raises up about 1/2 inch and seems to hit something, like it's locked in place. I want to check for coins that may be stuck underneath. I don't know what else to try. I tried turning it from side to side, as if it's washing, but it won't move back & forth either.....not sure if that's possible with the power off. What could be the problem ??

I have the same machine as your.......I cannot find the error code list....the only one I can find is for those with the electronic display......where can I find a list of codes that displays what the error is based on the number of blinks

i still have a issue with it after i followed yr help

Where do or can I get the fault code sheet in the video

Our washer keeps getting stuck in diagnostics. It will keep shake violently and not stop. After 5 minutes we have to unplug the washing machine . Any ideas? Thanks

My sensing and wash lite stays on! What now?

I followed the steps for a bravos xl washer and the lcd lights never went on.

I hate this stupid washer mine u press start it spins real fast then stops n thats it im gonna try this hopefully it works

OK, but better if there were more info afterward. Mine went into 'sensing' for a long time... I didn't know what "normal' time was for it to do its thing. . 2 minutes? 20 minutes? An hour? 2 weeks? Mine lit up 'sensing' then the drain pump ran for 10 minutes before I finally unplugged the thing.

Getting it out of diagnostic mode how do you do that?

Hi. Thanks so much but mine won’t go into diagnostic mode after following your instructions. Help.

Where can I find the service manual for this machine? I can't find anywhere to tell me what all the other settings do other than the calibrate function you showed.

Where did u get that error code list?

Just tried it and sadly it didn't work with mine. Nothing lights up.

Do you have in PDF that manual?

What if the lights don’t come on?

Why do I see all yellow lights instead of green?

Dang

Where can I find this error codes

Mine won't go into diagnostic mode why

This guy sounds like a robot.

This changes from models. No name, just the model. Diagnostics are different from year to year and the new matching set you got yesterday, was built 5 years ago. No diagnostics, no flow chart, no schematics and blinking lights? GM had this in 1981 with blink codes. 12=ok, 23=TPS, and so on. Give me the rotary reed switch with a timer motor on it, and maybe I will call for repair in 23 years. It is cheap to put everything onto a $23.58 circuit board that retails from Maytag only at $312 plus shipping. Installation not include except in second service call. Another $114! Congrats Maytag on you move out of the USA into Mexico and printed circuit boards from China! Wonderful business model to increase billable hours for repair shops as customers with extensive backgrounds in electronics can do nothing as the washing machine new installed yesterday was built 5 years ago. Show me the date, enter diagnostics and the blinking code chart. I have a $500 Fluke 87-5 DMM and folks, don't let it move with an unbalanced load, like tennis shoes. You get a "Spin" light blinking and that will cost you a service call! $100-$150 depending on where you live and the tax structure as this is a service. That is taxed by your state & city. Congrats on your purchase. We are pleased even if you are not.

🚨 so you 3 Right 1 left 1right: Puts u on COLD WASH as seen when ALL Lights begin to Flash. 🚩🚩At what point Did you Move your knob down 1 more ?! Because you don't show this on the Video! 🚩 🚨🚨Your video says go down one more that would take u to done!.....NO it Does not!....1 more turn puts me on SOAK!...

Can not hear you

Going too fast can't follow

Biggest piece of junk washers ever. Ours has always given trouble since brand new.