Whisper Wash Classic Surface Cleaner Repair- Change Cartridge and 4 Nozzle Bar
Рет қаралды 2,531
2 жыл бұрынWhisper Wash Classic 19 in repair video to where I show you how to change out the cartridge and the 4 nozzle bar. I use this surface cleaner with a 8 GPM Honda GX690 with the General pump TSF2021. I use the 2502 surface cleaner tips. You may also need to weigh your surface cleaner down with a couple of 3 lb ankle weights. Hope this helps your with your Whisper Wash repair.
#pressurewashing #surfacecleaner
@TheFreshRinse 2 жыл бұрын
I’m super grateful for this. I appreciate you!
@ExpertPowerWash 2 жыл бұрын
Thank you! Love your channel. I really like your comedy. Keep up the great channel.
@bestandsafe1948 2 жыл бұрын
Actually just needed this. Thanks
@ExpertPowerWash 2 жыл бұрын
Glad it helped. Thanks for watching and commenting.
@mikeschmitt5273 2 жыл бұрын
Great info for when the time comes on my WW Classic 19"
@ExpertPowerWash 2 жыл бұрын
Thank you. Appreciate the comments. I left you a link for your other comments about the tank.
@allproexteriorservicesllc5338 2 жыл бұрын
Good detailed video! Hope all is well.
@ExpertPowerWash 2 жыл бұрын
Thank you! Appreciate the comments.
@truthhammer9567 7 ай бұрын
Great work, wear black rubber gloves next time, makes it much easier.
@ExpertPowerWash 7 ай бұрын
Thank you. Good call
@Zero2soft 2 жыл бұрын
Great vid, so you use 2502 's for the 19 inch running on a 8gpm? Just curious I'm about to get rid of the BE surface cleaner and get a whisper wash with 4 nozzle bar and wanna make sure I'm not eating up concrete. Thanks
@ExpertPowerWash 2 жыл бұрын
That’s what I’m running and it works well.
@matthewmiller8049 2 жыл бұрын
Awesome video. It'll be very helpful. Have you even ran the 2 tip bar on surface cleaner?
@ExpertPowerWash 2 жыл бұрын
I’ve ran a 2 nozzle a while back and decided to give a the 4 nozzle a try. The two nozzle worked fine. I believe you want a wider fan on those. I found from my experience that the four nozzle works a little better at leaving no lines. The only downfall is that the smaller nozzles on a four bar clog easier.
@matthewmiller8049 2 жыл бұрын
@@ExpertPowerWash What size did you run with just the 2 nozzles? That's what I'm trying to avoid...just in case. Thanks for replying dude!!👍👍
@ExpertPowerWash 2 жыл бұрын
For a two nozzle at 8 GPM, you will need 25 degree 4.5 orfice
@newviewnc Жыл бұрын
How do you know it’s the cartridge and not the swivel?
@ExpertPowerWash Жыл бұрын
I know stuff🙂
@blakenasser7166 Жыл бұрын
What’s the difference between the yellow and blue one? Just that one is plastic and one is aluminum? The heads are the same?
@ExpertPowerWash Жыл бұрын
Yes. Everything else is the same
@mikecarlson6083 2 жыл бұрын
You ever use hot water with whisper surface cleaner
@ExpertPowerWash 2 жыл бұрын
Have a friend that does and he says it works great.
@elmeromero6207 3 ай бұрын
Its not tight enough bro
@ExpertPowerWash 3 ай бұрын
Bummer I thought it was.
King Of Pressure Washing
Рет қаралды 9 М.
超人夫妇
Рет қаралды 41 МЛН
Dan's Vlog
Рет қаралды 271 М.
Puerto Rican Hammer
Рет қаралды 8 М.
Repair Geek
Рет қаралды 2,4 МЛН
Pink Flamingo Power Wash LLC
Рет қаралды 3,6 М.