Replacing Whisper Wash Rotary Head Swivel Cartridge Part # WW311

Рет қаралды 9,395

9 жыл бұрын

How to replace the rebuild cartridge in a whisper wash rotary head swivel. amzn.to/2wzJT0A
Part # WW311
or
Here the whole swivel
amzn.to/2xJDdSq
HELPFUL RESOURCES
LEARN HOW TO MAKE MONEY IN THE WINTER TIME!
www.christmaslightstraining.com/
WHAT I USE TO VIDEO
Tripod
amzn.to/2IxNsKI
Mini tripod
amzn.to/2Ismrs0
IPHONE 7
GoPro HERO5 Session
amzn.to/2KnSmLU
PRESSURE WASHING STUFF
XJET M5 HIGH PRESSURE DELUXE VARIABLE LONG RANGE NOZZLE
amzn.to/2Krqvu4
Pressure Wash Hose
amzn.to/2KkdPFv
3/8-Inch Stainless Steel Quick Connect
amzn.to/2Mr2ZhA
Power Pressure Washer O-Rings for 3/8" Quick Coupler, High Temperature Viton (10 pack)
amzn.to/2yQY6wy
4000 PSI BALL valve
amzn.to/2KlqbNK
5000psi/12gpm By Suttner
amzn.to/2tx5PdX
Ladder Saver Long Range Chemical Nozzle
amzn.to/2IsNLq5
Mosmatic Live Pressure Washer Swivel - 4000 PSI, 3/8in.
amzn.to/2lAKFHx
Honda GX630 and GX690 20mm Drainzit for Honda V-Twin Engines Oil Change Aid
amzn.to/2MnONWM
Super Swivel - Heavy Duty Hose Reel Swivel - 1/2
amzn.to/2Klv8G5
WINDOW CLEANING
Water fed pole
amzn.to/2lzyXNb3
These are all Affiliate links

Пікірлер: 19

@jccharles8055 8 жыл бұрын

Hey Mike. Just wanted to thank you for your videos. I've gained many valuable tips from them and appreciate them greatly. Please keep them coming.

@45jharper Жыл бұрын

Great video!! Would you know the part number for the seal? Thanks

@gjohns316 9 жыл бұрын

Very informative. Haven't had to replace one yet.

@ronsmith6493 8 жыл бұрын

Thanks mike. this will help me today.

@orangepressurewashinginc.922 8 жыл бұрын

Hey Mike. Just wanted to thank you for your videos.

@danielbeauchamp2219 9 жыл бұрын

Great video! Could you do a follow up about going through the cartridge and checking the seals as well?

@powerwasher2106 6 ай бұрын

Easy pizzy

@kingofpressurewash 6 ай бұрын

Thank you for your comment! I'm happy to hear that you found it easy!

@powerwasher2106 6 ай бұрын

@@kingofpressurewash I actually ordered the bar and the cartridge with the 3/8 adapter easy pizzy

@lisaflan224 9 жыл бұрын

hey Mike great video. Any tips on removing frozen nozzles off the spray bar?

@davidbantle7992 6 жыл бұрын

Hi Mike I had a couple old bearings with some rust and corrosion on them so I wired brushed them and greased the outside the shaft went on ok but I had a hell of a time reinstalling into the housing and sounded like something was rubbing when I went to turn it. If the cartridge doesn't slide in easy does it me something binding or maybe I should have used brand new bearings? Thanks Dave

@dfingerz 4 жыл бұрын

My 20” whirl away started wobbling today. I thought a jet might be clogged but they were both clear. Any idea what might be causing this?

@kingofpressurewash 4 жыл бұрын

Did you hit anything? Or been to tip

@dfingerz 4 жыл бұрын

Power Washing I don’t think so. I don’t see any evidence of hitting something.

@JOSHUAloves1 7 жыл бұрын

hey brother bought me a used Surface Cleaner yesterday a classic but the water keeps coming out of the three holes on top of the swivel and it's the black swivel it's the older model swivel it's not the new Greenland why is the water coming up through those three holes on the top do you know thanks brother

@DanielFarnan 7 жыл бұрын

The water coming out of the holes is a sign that the top seal has failed and is allowing water into the chamber that holds the two bearings. Over time the water in this chamber will cause the bearings to fail and the hover will no longer spin. Unfortunately the older style were not built to be rebuildable by the consumer. luckily you can buy a completely assembled green version and swap it in place of the old style version. pressuretek.com/coswas.html

@JOSHUAloves1 7 жыл бұрын

Thank you sir

@DanielFarnan 7 жыл бұрын

Joshua Jesuslover Hughes no problem i just got done rebuilding one of mine today.

@JOSHUAloves1 7 жыл бұрын

Daniel Farnan that is awesome brother I have to admit because that's swivel broke I'll put them Mighty m Honda Classic I had to modify it I had to punch two holes in it but once I get the new one it'll still Mount and I can always fill in the holes