WHITE Field Boss 4-210 Tractor. Good deal or Bust?

Рет қаралды 24,266

6 ай бұрын

This is a tractor review for a White 4-210 Field boss. Bought site unseen "as is where is" from "Beekmans Auction". A 900km round trip in a Peterbilt 379 lowbed to pick up this WHITE 4-210 Field Boss tractor. Price is right? or is it scrap? Will it plow our fields with a 6 bottom plow? Lets take it out for a test drive and see if we can give a good overall review of this tractor.

Пікірлер: 26

@penji409 6 ай бұрын

Great video. I had a White 4-180 with the Cat 3208 210HP. I used it for many years and sold it to another farmer when I retired. It pulled a 8-16 Oliver plow anywhere, never short of power. I loved that tractor!

@marielosinga3892 6 ай бұрын

We’re in East Tx and have one identical to this white tractor, if you have any questions let me know!

@paultheisen5290 6 ай бұрын

Paul from Iowa, I call that a Win, if you guys wouldn't have picked up that tractor it probably would have just rotted away. That's a Great buy, cheap horse power

@user-eu6rc3ot8o 6 ай бұрын

That White was walking away with that six bottom plow!

@johndunn2985 6 ай бұрын

3208 are good motor need to keep it service properly good content

@pantagraph007 6 ай бұрын

Great looking tractor. I have a 4-175 and I usually put the underdrive in low to change gears. One must stop to change gears anyhow and its easier on the clutch to start moving in low range. Plus one can experience the snap as the underdrive shifts up. Never get tired of that. I noticed your 4-210 is missing the two shields that protect the oil pan and underdrive, cheap insurance you might want to look into. A little TLC for all the years of abuse and you will have a solid tractor. Keep the revs up on the cat. One of the big problems I believe was that farmers were use to an Inline 6 which had a lower pto rpm rating on the engine. Being creatures of habit they operated the cats the same way. What kills the cat is lugging them. I do not have the preheater in the intake or a heater for the water but I never had a problem with starting the cat well below freezing. It will smoke a lot on startup but will soon purr. My tractor when worked hard likes to sip oil so keep an eye on that. Keep us updated on your progress.

@redironacres 6 ай бұрын

Looks like a good tractor. I had a 4-175 turned up to 210 and it was really good tractor. Your shift linkage could be wore leading to the hard shifting. Whites also shift easier when in underdrive because it releases the pressure off the power shift clutches

@J_Nproductions 6 ай бұрын

Thanks for the info. We haven’t put that many hours on it yet so I’ll be looking forward to this spring.

@johnplatt8369 6 ай бұрын

She is a monster, I would love a day on that beast, but living here in North Wales in UK your a bit far off 😂 cracking vidio Cheers Guys 👍👍

@J_Nproductions 6 ай бұрын

Thanks 👍

@Mad_Farmer912 6 ай бұрын

That pit was for a milking parlor This old iron will always be better than whats manufactured tofay.

@J_Nproductions 6 ай бұрын

Thanks madfarmer, at the time we were getting a little goofy. Thanks for finally answering my question. That makes so much more sense being a milling parlor. 😅

@davidbarnes706 5 ай бұрын

You bought a great tractor

@frontagulus 6 ай бұрын

You'd think a spare battery and jumper cables would be worth 3 hours of fecking around but I guess not... 3208 is no different to any other engine - if it's operated within specs and maintained correctly, it'll perform satisfactorily. Run it at rated speed, which I think is 2800. 1900 is too low if it is under moderate or higher load

@J_Nproductions 6 ай бұрын

Thanks , I definitely have to rev it up more. We are obviously used to the inline 6 tractors. And yes I spent 3-4 hours with excellent jumper cables, cracking injector lines etc. just didn’t film that part. Couldn’t get good fuel pressure. In hindsight, it was just gummed up fuel at the injector pump but didn’t want to get in that deep so far from home.

@mikewarpula911 5 ай бұрын

3208 is like any diesel it needs to spin good to start.flow timing the engine will help some on power and a lot on cold start up smoke.the also had pencil injectors need to be checked and cleaned from time to time.later 3208s had turbos good engine ,like any thing good maintenance .