The dash on the thumbnail couldn't have been in a worse spot 😂
@sportbiketrackgear3 жыл бұрын
LOL Video Caleb fucked that one up! - Van
@marszxc3 жыл бұрын
Maybe it was intentional. 🤣
@benwells23383 жыл бұрын
Haha I thought the same thing. I had a feeling someone might comment on that and you didn’t disappoint!
@T4HT4Hs Жыл бұрын
Learned exactly what I needed to and more in 14 mins. Great vid, thanks!
@sportbiketrackgear Жыл бұрын
You are welcome and thank you for watching! - Van
@prjgrudge3 жыл бұрын
Learned the hardway and had all those cable management and clearance issues you mentioned trying to give my 50 year old body some higher clip ons. Planning would have made all the difference. Great information.
@sportbiketrackgear3 жыл бұрын
This is exactly the reason we shot this one today. Thanks for watching and I hope you got your bike all sorted out. - Van
@prjgrudge3 жыл бұрын
@@sportbiketrackgear Nope. I bought some halo clip ons for my gixxer600 a few years back. Right before that I went ahead and upgraded the stock brake lines with braided ones. When I did that I only gave myself enough length for my stock clip ons. I ended up keeping the stock clip ons. After that I purchased an L6 1000 and upgraded the lines again but, I'm just dealing with the stock clip ons for now.
@stephensu59293 жыл бұрын
I’ve been wondering about this for days. It’s like you read my mind!
@sportbiketrackgear3 жыл бұрын
No worries and thank you for watching! - Van
@DN-zh1bv2 жыл бұрын
When you order clip ons, you should order extra bars and keep them in your trunk if you street ride.. so if you go down adn you can still ride home, but your handle bar is broke off, you can slap a new one in and ride home.. zip tie them to your subframe under the fairing if you need to..
@sportbiketrackgear2 жыл бұрын
Not a bad idea. - Van
@kx5013 жыл бұрын
That shirts awesome much better than the grey one, would be good to see it in a button up workshop style instead of the polo
@sportbiketrackgear3 жыл бұрын
The old one is from way back when I did a couple of AMA supersport rounds. While that is a good memory for the old man I will say I am having a ton of fun wrenching for the kid! - Van
@thomastometich67673 жыл бұрын
Excellent video as always, super super informative
@sportbiketrackgear3 жыл бұрын
Thanks for watching and the kind words. - Van
@ethanmacheras59673 жыл бұрын
Video was awesome, I might use one of these options on my bike!
@sportbiketrackgear3 жыл бұрын
Happy to hear it was helpful. - Van
@jonor953 жыл бұрын
Great info as always.👏 That shirts a real beauty👍
@sportbiketrackgear3 жыл бұрын
Thanks for watching! These are the shirts we made for Max's MotoAmerica racing. - Van
@markdoveaston3 жыл бұрын
If your not first, your last!!🤣🤣🤣
@sportbiketrackgear3 жыл бұрын
This is a 100% true statement. - Van
@eddyquik11 ай бұрын
Great video and explanation!! Solid video!!
@sportbiketrackgear11 ай бұрын
Thank you for watching and the kind words. - Van
@RadDadisRad2 ай бұрын
I have a 2024 Triumph Street Triple 765 RS. It has regular handlebars, but I was looking to see if I could find some zero rise handlebars to get a more sporty riding position. Looking at rear sets too to bring my feet up and back a little.
@sportbiketrackgear2 ай бұрын
Some riders are converting this bike into a race bike by installing clip ons, race bodywork etc... - Van
@DG-ss1gc2 жыл бұрын
Hopefully someone can help: I have gone down the “journey” of dialing in my clip ons for street. Got impaktek 4inch riser clip ons, at full rise it’s very comfy, but the thing is I feel these bikes (supers-port, zx6r in my case) handle much better with the clip ons in the regular position. Despite how tedious it can be on the street. I’ve since bought a 1000sx which is very comfy, so I’m considering putting my clip ons on my zx6r back to more of a race setting. , I’ve learned height doesn’t change the reach near as much as cant , I have them at 0 degrees , if I go to 7 or more , it really changes the reach, but I feel it makes the bike maneuver better especially on sharp street turns where you gotta be careful due to gravel and water.
@sportbiketrackgear2 жыл бұрын
I prefer the 7 to the 0 as well. IMO if you plan to ride the bike aggressively or on the track at all they are a much better option. The risers transform a sportbike into more of a sport touring bike. - Van
@derekmcloughlin6575 ай бұрын
Great video allni need to know now is, how do i set them for myself, i hace a set of cipons but not sure if there out to far or in to close ,
@sportbiketrackgear5 ай бұрын
Start with a setting close to the OEM placement and adjust from there to find what suits you best. - Van
@darrenroach8275 Жыл бұрын
Im 5'7 and just bought 23 zx636 . What rise would you recommend for better street ability and still be able to track day it. Thanks and great video . Very informative
@sportbiketrackgear Жыл бұрын
Riser clip ons are not recommended for this model. You will be best off installing a set of standard clip ons on you 636. - Van
@buzzlightyear24903 жыл бұрын
Hello there brian , iv just for the first time change out handle bars to high bars for my zx1400r Kawasaki, it has 100% riding difference in lot of aspects, extended brake line kit comes with in, my only concern after completing the installation is the wiring of the right side that once in at full turn that the wires are fully straight with lillte put. Brian, like to ask this question bud, is there away of extending the wires or is there a wire kits out there. Great video champ
@sportbiketrackgear3 жыл бұрын
If you need to you can always splice in extra length to the wiring harness. Before doing that I would take a close look at the harness to see if you could modify some of the routing for it to gain some additional slack. - Van
@jonathanatkinson2515 Жыл бұрын
This is an amazing video & extremely informative. I just bought a 2017 zx10r & the previous owner put some clip on’s that make you sit upright. I want to switch back to the original riding position of a sport bike. I’m unsure on which clip on’s will be the best fit for my bike, attack performance or vortex. I’m 5’7. Any advice from a professional like yourself would be very helpful to me
@sportbiketrackgear Жыл бұрын
All of the major hard part brands each have a solid clip on set for your bike. You will need a 50mm set of standard, non-riser clip ons for your bike. - Van
@ReptileRaptureRR2 жыл бұрын
Can you do one on why getting track fairings may force you to install clip-ons instead of using the factory clips-ons? Ex. I have a 2007 SV650 that I want to get the Hotbodies track fairings for, the kit requires aftermarket 41mm clip-ons.
@sportbiketrackgear2 жыл бұрын
This is rare as most sport bikes will not require changing the clip ons to allow for race bodywork use. - Van
@bgarrett0024 Жыл бұрын
I just bought a 2019 Triumph speed twin, and I'm considering modifying it by installing clip ons in order to lower my riding position. My takeaway from your video is that it's not at all a simple modification. That said, the shop quoted me $700 for parts and labor for that installation, which seems exorbitant. Any thoughts on which bars are best for that model, whether that quote seems right, and whether or not I should simply install them myself? At the very least I would like to procure the bars myself in order to keep the costs under control. I'm 5'9", 190 lbs, and have very long arms (6'3" wingspan), in case that affects your answer. Thanks for your input.
@sportbiketrackgear Жыл бұрын
I am sorry to say I am not familiar enough with this model to make a recommendation for you. If the change is significant enough that it requires changing cables and or brake lines I could see it easily costing that much. - Van
@sushantgore38063 жыл бұрын
Hi ! I have added the graves and the vortex 50mm clipons in my cart for the zx10r 2018. Which ones have longer tubes for maximum leverage ? A satisfied customer.
@sportbiketrackgear3 жыл бұрын
Bar length on these will be the same. Thank you for your business and apologies for the slow response. We were on the west coast racing for the past three weeks +. - Van
@sushantgore38063 жыл бұрын
@@sportbiketrackgear Purchased a pair of Graves ! Thanks for the quality product.
@dougiequick1 Жыл бұрын
How about for 2023 S1000RR How much higher can do bars for this bike? Id buy ie tomorrow if I knew I could relax the ergos without it be a crazy "journey"
@sportbiketrackgear Жыл бұрын
Here is a link to a riser clip on guide from our friends at Woodcraft. cdn.shopify.com/s/files/1/0248/5973/8163/files/clipon_risers.pdf?v=1592319992 This should help you determine if risers will work for you. What I can tell you is modifying the handlebar position can be challenging, especially trying to raise it up. - Van
@MrBolioclyde4 ай бұрын
If you had a zx7r which clip ons would you run ? would you go standard or LONG one from woodcraft ? Will the woodcraft ones be any different than the stock ones ?
@sportbiketrackgear4 ай бұрын
Standard length is what we run. They will be a little lower and more forward from OEM. - Van
@bugzx6r8003 жыл бұрын
Where can I buy that shirt ☺️
@sportbiketrackgear3 жыл бұрын
We printed these up for Max Van's MotoAmerica Junior Cup races. They cost me like $70 each to print. Currently we are looking for a vendor to produce at a more reasonable cost so we can sell them. - Van
@bugzx6r8003 жыл бұрын
@@sportbiketrackgear nice man I think 70 dollars isn’t a bad price cause they look sweet. What would the postage to Ireland be by any chance if ya want to sell one 😁
@shawnlack15272 жыл бұрын
@@bugzx6r800 I’d be fine with 70$ I want one
@rdm263 жыл бұрын
Good info.
@sportbiketrackgear2 жыл бұрын
Thank you for watching! - Van
@stevelaymon76532 жыл бұрын
2003 Honda RC 51 Older rider long legs shorter arms, would like to shorten the reach and possible raise bars slightly, any experience recommendations etc. don"t want to trim the fairing. Thanks Steve
@sportbiketrackgear2 жыл бұрын
Your only real option here would be to install a set of riser clip ons. Woodcraft has several options to choose from and they have a guide to help determine which rise you can use (if any) without issues. Here is a link to that chart: cdn.shopify.com/s/files/1/0248/5973/8163/files/clipon_risers.pdf?v=1592319992
@wdkwang3 жыл бұрын
Hey Brian, great video. Quick question: I'm 6' 2" and plan to get clip ons for a 15+ R1. Is there a particular clip on brand you recommend? Looking at the multiple options out there for the bike, it's difficult to distinguish which would be best for me. Thank you.
@sportbiketrackgear3 жыл бұрын
Well that really depends on what you are looking to do. If you need to raise the bars take a look at the Woodcraft riser clip ons or the Helibars which are adjustable. Now if you are looking for a standard set of race clip ons Driven, Attack, Woodcraft and Vortex all make nice parts. - Van
@YA-ee9zf3 жыл бұрын
Tight shirt guy haven’t seen your vids for a long time bro
@sportbiketrackgear3 жыл бұрын
Shirt fits perfectly. If yours fits different perhaps you should work on that? - Van
@rytacarms3 жыл бұрын
Brian I have a 18 R6 and will be purchasing clip ons in a few days. Question is how did the bike feel with the attack clip ons to the vortex. And which one would you run for a track only bike
@sportbiketrackgear3 жыл бұрын
If you need the bars to be closer to you then the Attack are the way to go. If you are happy with the reach to the OEM bars the Vortex are the way to go. Also important to note the Attack are a little tougher to install because they really strain the limits of the throttle cables and such with every model being a little different. - Van
@madingahmar44203 жыл бұрын
The mask on the exhaust 8:27 , is that an easter egg or something you do for the bike?
@dbdan613 жыл бұрын
Adds 5hp.
@sportbiketrackgear3 жыл бұрын
LOL I put that on there to take a pic for Facebook a few weeks ago. - Van
@sportbiketrackgear3 жыл бұрын
7.5 hp actually. - Van
@madingahmar44203 жыл бұрын
@@sportbiketrackgear epic! I’ll make sure to do it for my bike too 😆 and an early MERRY CHRISTMAS AND A HAPPY NEW YEAR!
@MK3842 жыл бұрын
Finally checked off track day on my bucket list. I borrowed a stock R7 but I own a CBR500R (2021) any eta on rear sets and clip ons?
@sportbiketrackgear2 жыл бұрын
We expect to see some of the R7 stuff in the coming weeks with most ready to go in the upcoming off season. - Van
@MK3842 жыл бұрын
@@sportbiketrackgear any rear sets or clip ons available for cbr500r 2021? I'm trying to convert my bike to a track bike in the future. Not sure if I am ready for new R7 just yet. I've been doing some research and it looks like there some racing spec cbr500r back in the day in some smaller competitions in Europe. I can find the specs for that but any info would be greatly appreciated
@ihsanm12 жыл бұрын
Those aftermarket clip ons that you have that aren't installed... Are the ends removable? I want to buy after markets clip ons and put lever guards on them.
@sportbiketrackgear2 жыл бұрын
Pretty much all of the aftermarket clip ons have plastic bar ends that are removable so you can install lever guards etc... - Van
@indegoadult Жыл бұрын
Hey, so I'm considering switching the stock clipons to aftermarket ones to get a better ability to tweak them to my body shape, I'm really looking for a good break down of what all the different options mean, you mentioned offset there and you didn't really go into much detail, you said it was zero offset? Essentially I'm looking for a set of clipons that will level out and take my hands a little bit wider and further away. Am I looking for zero offset or 20deg 30deg 50deg ? I have no idea what I need to measure to know what numbers to pick. will offset help with clearance issues?
@sportbiketrackgear Жыл бұрын
This will be hard to answer properly over KZfaq comments. Please shoot the team an email on orders@sportbiketrackgear.com and they will get you all sorted out. - Van
@jfu52223 жыл бұрын
I was wondering, does anyone makes clip-ons for a KTM rc390 with a longer reach? I can't get my elbows tucked in ahead of my knees and would like to move the bars forward an inch or two. Thanks for all the great content.
@sportbiketrackgear3 жыл бұрын
Sorry I am not aware of any KTM 390 specific clip ons. - Van
@Yuaaaur2 жыл бұрын
I’m about to install clip ons on my naked bike
@sportbiketrackgear2 жыл бұрын
Streetfighter look! - Van
@plantdaddymode1399 Жыл бұрын
I have a 2017 gsxr 750 that I’d like to put risers on. Can we order the longer throttle cable, clutch cable and longer brake lines through STG?
@sportbiketrackgear Жыл бұрын
I have an option for you that will allow you to use your OEM cables and lines from Helibars. The product listing in the link shows the difference in position and gives some measurements to further qualify the difference. Helibars Suzuki GSX-R600/750 06-22 TracStar Handlebar Risers www.sportbiketrackgear.com/helibars-suzuki-gsx-r600-750-06-22-tracstar-handlebar-risers/ - Van
@kellygough14642 жыл бұрын
Hey I heard u mention Nelson ledges. Are located in Ohio or do work in Ohio?
@sportbiketrackgear2 жыл бұрын
We are located in Shelby TWP Michigan. - Van
@jace1873 Жыл бұрын
Hey there, I'm looking to add some woodcraft clip ons to my 2014 fz6r. I've been back and forth and seen different people use either the 1.5 inch rise or the 2 inch rise. With the 1.5 I think there is an issue with the brake lever touching qhen u left turn all the way. But I have heard that with the 2 inch rise there supposed to be no clearance or other issues. Wanted to ask if you have any info or recommendations for this bike. Plz lmk if have any helpful info for this I would appreciate it. Thanks
@sportbiketrackgear Жыл бұрын
I am not familiar with this model and have no personal experience installing clip ons on it. - Van
@jaedub65033 жыл бұрын
Man I’m a new rider n need new clips one for my ZX6R 2013 but I’m getting a headache tryinna figure this out
@sportbiketrackgear3 жыл бұрын
On that bike I would go with the Woodcraft 3 piece split clip ons. Here is a link to them on our site: www.sportbiketrackgear.com/woodcraft-3-piece-split-clip-ons/ - Van
@nicksenkovs65583 жыл бұрын
I have a heavily modded 2007 R1 and am getting very bad neck pain when riding, what is the best option to raise the handlebars please? Do you sell anything for a 2007 R1, that would raise the bars to a more upright position please?
@sportbiketrackgear3 жыл бұрын
This is the most radical option but will get the bars up there and make it comfortable: ABM Yamaha YZF-R1 2007-08 Handlebar Riser Kit www.sportbiketrackgear.com/abm-yamaha-yzf-r1-2007-08-handlebar-riser-kit/ These are also pretty sweet while being a little less radical in terms of rise and change: Helibars for Yamaha R1 04-08 www.sportbiketrackgear.com/helibars-for-yamaha-r1-04-08/
@slifer10022 жыл бұрын
I have an aprilia rs 660 and was thinking about clip ons for it, but wanted them to stay higher up like they are from factory to keep it comfortable on the street. Would you have any suggestions for me?
@sportbiketrackgear2 жыл бұрын
I would take a look at the Woodcraft riser clip ons. Here is a link to them on our site: www.sportbiketrackgear.com/woodcraft/?_bc_fsnf=1&Product=Clip-Ons
@philgenoseo67713 жыл бұрын
Hi I have a 2001 tL1000s with a short reach . I’d like to find something, a kit possibly, to bring back an inch or two to the handlebars. Have any suggestions for me? Thanks
@sportbiketrackgear3 жыл бұрын
LSL Suzuki TL1000 S 97-02 Handlebar Riser Kit www.sportbiketrackgear.com/lsl-suzuki-tl1000-s-97-02-handlebar-riser-kit/
@hfr83433 жыл бұрын
I need either that shop shirt or that hoodie in the thumbnail. Any chance they're for sale Brian?
@sportbiketrackgear3 жыл бұрын
We printed these up for Max Van's MotoAmerica Junior Cup races. They cost me like $70 each to print. Currently we are looking for a vendor to produce at a more reasonable cost so we can sell them. We got some jackets for Max too, I was just wearing my Team Hammer hoodie today. - Van
@pastiesmash Жыл бұрын
Hi there, Hoping you might give me some advice.. I have a Gsxr 750 L9. I'm about 6ft and I find the position of the front brake lever a little too high. When riding in traffic I like to keep a finger or two on the front brake, but because the lever is slightly high I have to lift my fingers and this is uncomfortable. I tried rotating the lever down, but there is no room to move it as the brake lines contact the top of the fork. Would longer clip ons allow me to move the lever outward to get clearance for the brake line? If so, what clip on would you recommend? Thanks!
@4669racerx3 жыл бұрын
So the Ninja 400 comes installed on the clipons right?...........jk!!!! Lol!!🤣
@sportbiketrackgear3 жыл бұрын
Yes with a free exhaust on the bike as well. - Van
@rashadfarooq60582 жыл бұрын
Hi I have a cbr1000 2019 and do a lot a few long trips - what’s the best raiser I can get to get a more touring feel
@sportbiketrackgear2 жыл бұрын
I would take a look at the Woodcraft riser clip ons on our site. - Van
@richykong29304 ай бұрын
Thinking of finding clipons for a 2021 nc750x non-dct any advice?
@sportbiketrackgear4 ай бұрын
Sorry I am not aware of any clip ons produced for this model. - Van
@Vanz733 жыл бұрын
Hey Van Im 5'5" I just bought a 2005 Yamaha R6 with stock handlebar I have short arms and its hurting my arm and neck is WOodcraft handlebar riser clipons good for me or will it help me? Thanks -Van.
@sportbiketrackgear3 жыл бұрын
Woodcraft risers will help get the bars closer to you and should help. Important to note with the stock cables, brake line and electrical you can only move things so far before you will need to start modifying other shit. - Van
@giovannim1572 Жыл бұрын
Hey this is quite an old video. However, I have an 09 Ninja 650R, it's a pretty stand up(sport-touring) bike. Is there any way, using clip ons, to get a lower stance on the bike, or am I out of luck ?
@sportbiketrackgear Жыл бұрын
You can install clip ons with this model but you will most likely have to make some modifications to the OEM bodywork in order to get them to fit. - Van
@noforko3 жыл бұрын
Which is better for Honda Cb125 1985
@sportbiketrackgear3 жыл бұрын
Sorry I am not familiar with that model and not sure if there is a set that will fit it. - Van
@tadydrift3 жыл бұрын
Hey there, nice video tho. I was wondering i have a K4 sv 650 S in middle of Track preparation here and the stock clip ons are raised, but too much at my taste. Things is i can't put standard non raised clip ons aswell because even the racefairings interfere. So i was wondering if u know some brands that makes like 1inch raised clip ons and all ;)
@sportbiketrackgear3 жыл бұрын
Woodcraft 1 Inch Riser Clip-Ons www.sportbiketrackgear.com/woodcraft-1-inch-riser-clip-ons/
@delkevic65773 жыл бұрын
I run my SV naked with no rise clip ons I love it
@tadydrift3 жыл бұрын
@@delkevic6577 Ok nice, i actually though about going with BB plastics fairings, so that i can put non raised clip-ons
@gabrielalcivar9579 Жыл бұрын
Is this compatible with 2021 Kawasaki ninja 650 abs?
@sportbiketrackgear Жыл бұрын
You will need the Woodcraft 12-7741-78BK1 clip ons. We do not have these on our site but can get them for you. Please shoot the team an email to orders@sportbiketrackgear.com and the team will help you get the order placed. - Van
@ernestonoir57963 жыл бұрын
09 honda 600rr, 41mm fork.. but that is the bottom tube, what size clip-ons will I need for my bike?
@sportbiketrackgear3 жыл бұрын
You will need the 48mm Woodcraft 1 Inch Riser Clip-Ons. Here is a link to them on our site: www.sportbiketrackgear.com/woodcraft-1-inch-riser-clip-ons/ - Van
@3v1k13 жыл бұрын
How do you measure your fork size?
@ernestonoir57963 жыл бұрын
@@3v1k1 just call and tell them what size bike you have. they have the answers.
@user-sw2lv3zp6o3 жыл бұрын
Give me a set of Renthal Fatbars, Van.
@sportbiketrackgear3 жыл бұрын
Sorry man we do not do any off road stuff. - Van
@juicer40411 ай бұрын
will they work on gsxr 1000 2017 road bike?
@sportbiketrackgear11 ай бұрын
You can install clip ons on a 2017 GSXR1000 that is ridden on the road if you like. For this model a standard set will fit without any modifications. (no riser with a standard offset) - Van
@jinx3dproductions1683 жыл бұрын
Hey can you link me some clip ons that would work for a 2015 FZ6R
@sportbiketrackgear3 жыл бұрын
Sorry we do not have any clip ons listed for that model. - Van
@showtime79793 жыл бұрын
Hey any recommendations for a hayabusa ?
@sportbiketrackgear3 жыл бұрын
Sorry we do not really have a lot of Busa experience here. - Van
@josephdalton86073 жыл бұрын
Might get shit for this but what is the computer screen on your triple tree on the Gsxr1000?
@sportbiketrackgear3 жыл бұрын
That is my AiM Solo DL2 lap timer. - Van
@josephdalton86073 жыл бұрын
@@sportbiketrackgear thanks
@joshnunnes76332 жыл бұрын
I have a 2014 cbr1000rr SP I went down a little bit over a month ago. In doing so, it damaged my oem clip-ons. I'm having a hard time finding a pair of Clip-Ons that will work on my bike that I can afford. I bought a pair of woodcraft clip-ons off eBay. The seller said they were taken off a cbr 1000rr. Well, they don't fit. There are several problems I am encountering with these clip-ons, none of which I can afford. My bike is my only means of transportation. Do you have any ideas on an inexpensive pair of clip-ons I could put on my bike with little to no modifications needed? Thank you
@sportbiketrackgear2 жыл бұрын
A set of clip ons for this bike are all around the $150 ish range. I do not know of any really selling for less than that. - Van
@joshnunnes76332 жыл бұрын
Which ones would you recommend that won't require me to change the brake lines and throttle cable
@gglover21423 жыл бұрын
Where can i find the fit chart?
@sportbiketrackgear3 жыл бұрын
Here is a link to that on our site: www.sportbiketrackgear.com/product_images/product_pdf/Woodcraft-Clip-On-Application-Chart.pdf - Van
@dougiequick1 Жыл бұрын
What percentage of sportbikes ever get raced? For that matter what percentage of em even do track days? Or more than just a couple their entire service life? I dont understand why manufacturers dont offer versions of full faired sportbike models where one could actually buy one built for comfort....yes poser bikes with slightly taller fairings and upwardly offset clip ons along with the same detuned motors they already reserve for the butt ugly naked bikes And PLEASE dont just say "buy and adventure bike or naked" OR any of the strange ADV proportioned bikes that are NOT dirt worthy true adv bikes....like the S1000XR ....WHY?? WHY does it have to be so tall and heavy compared to the RR or the R? I almost bought an XR but it was ridiculously like an adv bike with 17" wheels....in total frustration I bought a Tracer 9gt instead which isnt much better and a year later I am looking to replace it but with WHAT??
@sportbiketrackgear Жыл бұрын
If you want to get a proper sportbike with handlebars high enough to make it comfortable there are a couple of options out there. We sell kits from ABM/LSL and Helibars that can make a massive difference. Below are links to both: Helibars www.sportbiketrackgear.com/helibars/ ABM/LSL www.sportbiketrackgear.com/lsl/?_bc_fsnf=1&Product=Handlebar+Riser+Kit
@labasrytas28762 жыл бұрын
this voice makes me sick
@sportbiketrackgear2 жыл бұрын
Well here is an idea: DON'T WATCH THE VIDEO! - Van
@labasrytas28762 жыл бұрын
@@sportbiketrackgear newer again your videos. dont worry you not the only one who can i watch