Wide Open Trigger | Troubleshooting Common Issues

Рет қаралды 27,651

Күн бұрын

Are you having issues getting your Wide Open Trigger to function properly? If so, you've come to the right place.
#WOTAR15 #WOT #WideOpenTrigger
__________
Connect with us on social!
Facebook: www. bigdaddyunlimited
Instagram: / big.daddy.unlimited
TikTok: / bigdaddyunlimited
Twitter: / unlimiteddaddy
KZfaq: / bigdaddyunlimited
While the political elite continues to infringe on all of our rights, there is one that specifically says SHALL NOT BE INFRINGED!!! Yet the Second Amendment continues to be an endangered species. You cannot defend the First WITHOUT the second!!! Gun enthusiasts and patriotic Americans understand why we have the second amendment. For love of country and passion for our God-given freedoms, Big Daddy Unlimited is the premier online destination for all your gun, gear, ammo and more! Join our Revolution today!
Big Daddy Unlimited combines high-tech curated shopping with a high-touch concierge customer service experience and more than 20 years of industry knowledge. We are revolutionizing the online gun, gear, and ammo buying process with the largest selection of in-stock products at everyday industry leading prices!

Пікірлер: 119

@late6812 5 ай бұрын

Never recieved anti walk pins with my triggers

@THECobrabitch Ай бұрын

Me either but I hear they're cheap anyways so he'll with it, I'll buy some nice plat colored ones.

@STANDYOURSHORTYBULLS 2 жыл бұрын

The only problem I had was the anti walk pins being really cheap

@Dr.Ballsonya 2 жыл бұрын

Sound product. Already have a few thousand rounds through mine without one issue with the trigger. It’s fun to see how the powder weight increase and decrease for my hand loads really change the ROF between batches.

@masterj7155 5 ай бұрын

I seen the Rare breed trigger has a spring issue with the disconnect spring where the bolt hits and over time the spring bends. And stops the function. Does this trigger use the 45 up or different spring. Or is same design as the breed trigger?

@Dr.Ballsonya 5 ай бұрын

@@masterj7155 don’t remember that was years ago and i got rid of it when all the ban talks came up

@kylejardee4411 2 жыл бұрын

What do you recommend to stabilize it when installed. Would wedging a chunk of wood suffice?

@bryanr5185 Жыл бұрын

I’m having problems with mine, I have a 7.5 inch barrel ar15. I have the brownswell nickel boron bcg, ar lower build kit from PSA and it keeps jamming up after rifing a couple rounds and fails to feed next round. Only had been successfull twice with firing a full mag.

@mawhdjuana7149 27 күн бұрын

Would it work with a folding stock ar by bear foot arms??

@bench175 2 жыл бұрын

what is cavitation in the trigger?

@let_freedom_ping 2 жыл бұрын

Mine is having hammer follows. I've got an h3 in it. tried it with a 10.3' with and without a can on it. and a 20'. Recomendations? just ordered a Giesele spring and H2 to see if that helps.

@theonlymango1620 2 жыл бұрын

Mine is having the same problem. Have tried pistol, mid, rifle gas, 10.5 w/can, 16 and 20. All will fire one/sometimes 2 rounds then stop. One in chamber and hammer up. Single round locks open. Tried with h3 and rifle buffer

@aidenfinney3106 2 жыл бұрын

The only kind of issue I’ve had with it is an inconsistent pull weight

@kevineuceda2645 2 жыл бұрын

Will a h buffer work?

@JohnPonthecuff 2 жыл бұрын

Exactly what I figured out with mine. It even caught me off guard for the first shots. Actually let go of the front hand grip. That will never happen again.....Great video.... I only have one question. Could I get replacement sleeves that could provide a better fit and the trigger housing won't jiggle. Works anyway, just asking.

@Dr.Ballsonya 2 жыл бұрын

If you email them they will send out better fitting ones. That’s what I did and they came in a few days.

@STANDYOURSHORTYBULLS 2 жыл бұрын

@@Dr.Ballsonya o hell yeah good to know 👌

@STANDYOURSHORTYBULLS 2 жыл бұрын

I'm pretty sure the trigger's supposed to fit a little loose like that

@JohnPonthecuff 2 жыл бұрын

@@STANDYOURSHORTYBULLS That's what they say, but I like it fitted. It's a preference, not a necessity.

@JohnPonthecuff 2 жыл бұрын

@@Dr.Ballsonya I tried that. They said no.

@noelignacio931 6 ай бұрын

I saw a video of a WOT trigger doing a mag dump with a .308, what BCG, buffer, buffer spring does someone need to make a WOT function properly on a .308???

@THECobrabitch Ай бұрын

Heaviest you can find. I'm talking like 9mm heavy 7.0-7.7oz

@D1nOnlyDennis 9 ай бұрын

What do you recommend to fix a failure to eject "Stovepipe" ? A live round would get pulled but the end of the brass would get caught looking like a Stovepipe. All I would have to due was puller the bolt back half an inch and I could then flick the Stovepipe out and it will fire and catch another Stovepipe 10 rounds in?

@GuitarGunner 9 ай бұрын

Sounds like a gas issue with your gun, not a trigger problem. I would put a regular trigger back into your lower and see if you get a stovepipe (use factory ammo and not reloads). Check your ejection pattern - your rounds should be ejecting at about 3 o'clock. If they're ejecting between 12 and 2 o'clock you're likely under-gassed or you're running a buffer weight that's too heavy.

@bretc1012 8 ай бұрын

Play with the buffer for sure. That is where I would start. Up the weight.. using a h2? Go to a h3.. ect.

@vitalwarfare233 2 жыл бұрын

I installed the WOT trigger into an Aero lower with an HK MR556 upper, took the gun to the range and couldn’t get it to fire, basically the trigger felt frozen or locked. There’s no click, the hammer doesn’t drop, nothing. I uninstalled and reinstalled the trigger just to make sure it was done properly and after watching these trouble shooting tips, I also installed a Geissele H3 buffer compared to the H1 buffer that I had previously attempted to fire with. At this point, I have not taken it back to the range, however I still cannot get it to dry fire so I’m assuming it won’t fire when a loaded magazine is in either. Some help or feedback would be greatly appreciated.

@Earth_Not_Above. 2 жыл бұрын

That would be your BCG locking the trigger lmao i know i bought a WOT 5 days ago and im still tinkering with it i cant even get it to fire more than 1 round without the spent brass failing to eject so im moving up from the H2 to the H3 if that doesn’t work im going to try a new buffer spring and if that still doesn’t work i may need a new BCG extractor also im using the BROWNELLS - M16 5.56 BOLT CARRIER GROUP NITRIDE MP thats the one that works for me and yeah it would help if they provided more information on which uppers/lowers and BCGs are compatible with the trigger 🙄 could help save me and 1,000s of other people a few 100 bucks

@snakeNP215 2 жыл бұрын

I having an issue where I get about 5 rounds to shoot then get some sort of jam but when I look at the bullet there’s firing pin marks on it so the firing pin hit it but the bullet didn’t fire, not sure what would cause that, i didn’t have any issues before the wot trigger, i also installed a brownells bcg at the same time I did the trigger so now am not sure which is causing the issue, some sort of light strike issue, goin to b installing my oem bcg back in, my oem bcg is m16 style bcg, I didn’t know i already had a m16 bcg until after I bought the brownells and took the gun apart so goin to put the oem bcg back in to see if it helps

@Earth_Not_Above. 2 жыл бұрын

@@snakeNP215 🤔 it could be the firing pin that needs a change yeah I know you shouldn’t have to change it but that could very well be the problem

@snakeNP215 2 жыл бұрын

@@Earth_Not_Above. yea so I will put my original bcg back in that i know didn’t have any issues, if I still have issues then it must be that I need a h2 buffer

@Earth_Not_Above. 2 жыл бұрын

@@snakeNP215 well yeah it’s Definitely the buffer 😂 it’s needs that oomph to work properly

@yuhgno5188 2 жыл бұрын

I want one.... Team Badassery sent me

@AbqDunn 3 ай бұрын

Mine has worked great for hundred of rounds but now when I pull trigger it doesn’t move. Rack and doesn’t move. Breakdown put back and still doesn’t move. Alignment is off a smidge like your video. Any ideas what’s wrong now?

@davidshechtman4746 21 күн бұрын

I am having the very same problem

@steveanderson4196 2 жыл бұрын

What buffer would you recomend. heavy or light adjustable one. i see they make two different kinds.

@xBRProductionsx 2 жыл бұрын

Heavy

@coryhershey5652 2 жыл бұрын

H2 minimum

@jsh4401 2 жыл бұрын

@smokingcrab2290 2 жыл бұрын

When are ya'll gonna release the graves ART trigger??

@juanarroyo465 2 жыл бұрын

They charging 1k for that thing

@HDFXSB645 2 жыл бұрын

There is a different version coming out that is supposedly going to be cheaper.

@ChrisSmith-uw2ln 2 жыл бұрын

Is there any way to lighten trigger pull without damaging WOT trigger

@CivilianArms2A Жыл бұрын

Hell no

@ChrisSmith-uw2ln Жыл бұрын

@@CivilianArms2A did you destroy or turn your trigger in yet

@TheBlackScatPack Жыл бұрын

The problem I’m having is when I load a magazine in and go to pull the trigger it doesn’t fire. When I eject the round it has a light primer strike.

@TheBlackScatPack Жыл бұрын

@jasonpuddy7866 I have a H3.

@RapidfireeSS109 3 ай бұрын

Did you get it figured out

@DislodgedTKO 2 жыл бұрын

For a standard 16in setup, am I going to need a h2 buffer or will it function with an h1?

@Earth_Not_Above. 2 жыл бұрын

H2 is required hell an H3 is even better honestly at this point it’s personal preference

@DislodgedTKO 2 жыл бұрын

@@Earth_Not_Above. so an h1 will not function, an h2 and h3 will but you prefer the h3?

@Earth_Not_Above. 2 жыл бұрын

@@DislodgedTKO yep it’s also the only one that works for me lmao

@frankspencer7251 2 жыл бұрын

Will a full auto bolt carrier work?

@josephcremeans 2 жыл бұрын

That's the bolt carrier they recommend.

@frankspencer7251 2 жыл бұрын

@@josephcremeans thanks for the reply 👍

@josephcremeans 2 жыл бұрын

@@frankspencer7251 just remember it might take some tuning to get it running just right. Finger finesse and buffer weights are probably the main issues people run into. They recommend an H2 or H3 buffer.

@ConatsersCustomFirearms 2 ай бұрын

When I shoot my FRT Trigger, even if I barely pull on the trigger will have a live round in a chamber and it won’t shoot another round. The hammer has followed it forward. I’ve tried changing the buffers. What’s going on?

@davidshechtman4746 21 күн бұрын

@@hddimitri7same problem here

@hondaservicecenter 3 күн бұрын

Yall ever figure anything out

@davidshechtman4746 3 күн бұрын

@@hondaservicecenter no. Took it apart and put it back together. Still frozen

@specopst4 2 жыл бұрын

Team badassery sent me

@rickmanley767 2 жыл бұрын

Cavitation doesn’t mean what you think it means

@TagAndBagEm 2 жыл бұрын

so does this trigger work, is it worth buying or am i going to have to do a bunch of work to get it to run? any input is appreciated

@toby183 2 жыл бұрын

Definitely worth it. Only thing I had to do was get a h3 buffer

@TagAndBagEm 2 жыл бұрын

@@toby183 what barrel length and gas tube length are you using? thank you for the info as well!

@TagAndBagEm 2 жыл бұрын

@@toby183 and is it reliable, ive read a lot of people saying they’ve tried different uppers and buffer weights and it wont run for them but others say it runs fine ive been thinking about getting one i just dont want to spend the money on something that isn’t reliable. it would just be a range toy for me but if it actually works reliably i will for sure order one

@joesashiify 2 жыл бұрын

House Rule 8 is being voted without consent hurry!

@Machoman50ta 2 жыл бұрын

HALF AN INCH is what he said 🤦🏽‍♂️

@christopher5418 2 жыл бұрын

And nothing about 9mm BCGs. Won't even fire once in my AR 9

@STANDYOURSHORTYBULLS 2 жыл бұрын

Really? Mine runs like Forrest gump🤘🔥

@garthbass5327 2 жыл бұрын

Gunsmith you are not

@BigDaddyUnlimited 2 жыл бұрын

Chris, please call WOT customer service for more help with this issue. They can be reached at (505) 919-7867

@lilsavage4195 Жыл бұрын

Dias Lightning link best think in my opinion nun of that trigger bulk shii if u wanna go cheap 3d swift link binary or even a dam coat hanger 🤦🤣🤣🤣🤣🤣

@blbreptiles4126 2 жыл бұрын

More like big daddy limited rights

@cmdr2005 2 жыл бұрын

"cavitation in the trigger" *mounts ROMEO-MSR backwards* HED GOMSMIFF

@Icybones000 2 жыл бұрын

SMH everytime people go to extended processes to show a firearm is unloaded, next time you better get a 2nd opinion and have an inspector right it off as done IAW (FASC) firearm safety check, CH 32 section 41-1thru 10B. By the way when are you all going to participate in a gun buyback program again?

@aerodynechambers 2 жыл бұрын

The redundancy of the safety checks are the point, as I understand it. I understand your sentiment, but the redundancy is part of firearm safety because it ensures that even if a mistake is made, there are additional procedures in place to prevent a ND

@Icybones000 2 жыл бұрын

@@aerodynechambers then you might as well borescope it as well, you might have actually missed seeing the round.

@aerodynechambers 2 жыл бұрын

@@Icybones000 thats why i look down the barrel of every gun i pick up, in order to see if there a bullet in their or not

@bentinhalf 2 жыл бұрын

Or buy the patent original FRT trigger. Wot is simply a stolen design.

@DaKOGJet 2 жыл бұрын

Exactly. Fuckin hacks.

@DaKOGJet 2 жыл бұрын

And broke boy here wants to defend it. It’s a knockout.

@STANDYOURSHORTYBULLS 2 жыл бұрын

So you're telling me if 20 people were running at you and you had the chance to pick up the semi automatic rifle or the rifle with the WOT trigger you would pick up the semi just because the WOT has similarities to another brand of hard reset triggers? 😂🤓 sounds like some high-school Karen shit to me 🤦‍♂️ @king jet post one of your rap songs on KZfaq Lmaoo let the world hear how u copied the 2 generations before you rap style SMH Everything from the car you drive to the clothes u wear To the guns you shoot are all a copy of somebody else's Product that's how you get more products is by seeing someone else's and making it better and that's what they did get over it ..

@DaKOGJet 2 жыл бұрын

@@STANDYOURSHORTYBULLS and I’ll outrap yo favorite rapper while we on the subject. With inspiration from everyone before me like everyone before me. But one thing I’ll guarantee is I won’t copy a Drake song word for word and rename it and make a new cover art and call it my own like this shitty company. Integrity bitch.

@STANDYOURSHORTYBULLS 2 жыл бұрын

@@DaKOGJet calm down karen