Very important to note that safety glasses should be worn 👀
@brucefulton3 жыл бұрын
If you have them, lapidary wheels are my choice for rounding, shaping etc on silver because they are water cooled. Just use the diamond wheels, not the resin wheels. Whichever sander you get, this one or one of the pendant motor driven, be aware that working silver on one of these can get the piece so hot it can seriously scorch your fingers in a matter of seconds. Either have a dish of cooling water handy and dunk every few seconds to cool, or wear some kind of finger protector (leather or wrap) applied to avoid nasty surprises.
@gabrielkirkbaca29103 жыл бұрын
I've been wanting one for years, currently retired and never really could afford one. PS I got to tell you, I've gone to jewelry School and quite frankly I've learned more from your channel than anything
@kaynefryday12513 жыл бұрын
Hi Andrew , that is the best belt sander I have ever seen ! The uses are endless ! Amazing, best thing since sliced bread !
@TheMob10803 жыл бұрын
I can already think of a million ways to use that!!
@albertpartridge67163 жыл бұрын
black and decker made a self contained belt sander years ago i bought one and it is still going strong plus you can still buy the belts for them and it did not cost a fortune as i would say that one will, it really narks me paying out huge sums of money for a fancy name piece of gear when there are just as good if not better cheep goods out there in the world.
@j.hensbergen60223 жыл бұрын
I think a belt sander could save you a lot of time. Never thought of it, but now it's on my list.
@stephenwoody81473 жыл бұрын
Andrew- Thank you for the great demonstration of this wonderful new tool! Durston great job!
@AR-mx8cl3 жыл бұрын
I like the way you explain things and I have learned alot from you. I'm new at all this but I enjoy working with metals and stones. Thanks for sharing your knowledge.
@ellencochrane78473 жыл бұрын
Just started jewellery making and I have made two things so far your tutorials have really helped me thank you
@jenniferw15703 жыл бұрын
Unlike some Tools this one is very useful. Thank you for the concise, clear information as always it's much appreciated, you keep me inspired.
@sdtuber10993 жыл бұрын
Fabulous thank you Andrew. Well done Durston!
@juliew14263 жыл бұрын
Now that is pretty much a perfect, handy device.
@JannHofmann3 жыл бұрын
Thank you Andrew, for this presentation of the nice little belt sander!
@tammygurl643 жыл бұрын
Wow! This is so cool! I've been on such a strict budget, it's taking me years to get the tools I need (or desire) so I'm definitely entering to win this! I've always loved tools even before getting into jewelry making. 😊 Thanks for a great demo!👍
@iiniijewelry Жыл бұрын
😂 I can’t afford one of these. I just stick to shaking everything off my desk for now 🤷🏽♂️
@myranesbitt33603 жыл бұрын
Hello Andrew. Love your video. How you explain what your going to work on. So amazing. Thank you for sharing your things you know.
@patrickmcnelis15203 жыл бұрын
Ohhhh...New toy!!! Love it!!
@doublybubblysoap97343 жыл бұрын
Thank you for offering this!! Good luck everyone!
@moorejl573 жыл бұрын
Pretty slick little sander.
@channel8H3 жыл бұрын
Nice!
@nikkihope14343 жыл бұрын
Ooh I'd love one of these, thanks for the demo Andrew
@johnlowry10553 жыл бұрын
I don't see them advertised in the USA
@Denaesartisanjewelry3 жыл бұрын
ABSOLUTELY AMAZING!!! I LOVE IT!
@learnmedia76293 жыл бұрын
Yet another informative video from Andrew. I did not realise I needed one until now, it does more than I thought. Do you think it might come later with a shield on the front? Just worried about something flying off into my face.
@Roy7..3 жыл бұрын
Andrew Berry thank you very much useful information
@Johnbro83 жыл бұрын
Thanks for sharing your advice and views Andrew👍👍😁
@lou196t3 жыл бұрын
That’s a pretty sweet belt sander.💙
@joannanorma3 жыл бұрын
I've been eyeing these off for a while. Thanks for the demo. PS what's the finest sand paper?
@julianlantz343 жыл бұрын
Hi Andrew! I love your videos they’re so helpful and informative, I do have an unrelated question though, when passing my silver ingot through the square wire section of my rolling mill the metal is flaking a lot, is this a problem with the ingot or is it user error with the mill? Any information would be super appreciated! Thank you! Keep up the amazing content
@brendaantolini52003 жыл бұрын
All the belt sanders I've looked at are huge and I have a very limited amount of space. That looks like the answer to my dilemma. Problem solved. Thanks.
@MauiMary3 жыл бұрын
Brilliant! I'll be entering...Andrew, Aloha 🌺by the way and thanks once again for your great videos. 🤗🤙
@TheTubeofjo3 жыл бұрын
Looks like it might be very useful....found the link 🤩
@vladnickul3 жыл бұрын
Where I can buy this at a outrageous price?
@gilliansprott54873 жыл бұрын
Interesting, thanks for explaining.
@howardschweitzer88473 жыл бұрын
looks sweet
@okiedean11123 жыл бұрын
Andrew, I hope You and Louise are well. Question, Do they make belts for sharpining gravers wirh this compact sanding system?
@Atthebench3 жыл бұрын
In theory yes the grits will shape the graver but the final sharpening would have to be done on a sharpening stone
@pauldegrande40083 жыл бұрын
Well done!
@andreaevans12873 жыл бұрын
Where can you buy belts!!? Otto Frei doesn't sell them!!
@Atthebench3 жыл бұрын
Durston themselves sell the belts
@pijnto3 жыл бұрын
$800 too expensive for me plus there are no belts available on their website
@johnsmalldridge63563 жыл бұрын
A little noisy and it would have been nice if it had a speed control.
@Atthebench3 жыл бұрын
The on off switch is also the speed control as I mentioned
@johnsmalldridge63563 жыл бұрын
@@Atthebench sorry, I must have missed that.
@Dan-ji4db3 жыл бұрын
6:32 😁👍🏻
@thinge273 жыл бұрын
Nice presentation Andrew, but like always with Durston gear....what an idiot high price.......sure this is UK made? And then 350 euro without shipping.......why?