Windshield Wiper Arm Change! EASY Same for most Vehicles! Don't use hammer unless very steady handed

Рет қаралды 176,895

5 жыл бұрын

(note) if you are going to use a hammer be very careful so you dont crack windshield or put something on windshield to protect it. all parts of your windshield wipers is very important for visibility and safe operation of your vehicle. This video shows you how to change out your windshield wiper arm, which can sometimes get bent, stripped, and cause your wipers to not make good contact with your windshield.
To Support Flashback502, please send donations to:
PayPal: www.paypal.me/Flashback502
Or
Fan Mail, Products & Donations:
Flashback502
Po Box 20201
Louisville, KY 40250

Пікірлер: 116

@dennisrphymurphy7929 Ай бұрын

I don't think that any person in the world could have explained that process more precise or clearer than you just did.. Thanks for your effort.

@billradford4381 3 жыл бұрын

Lucky you didn't crack your windscreen when forcing the hammer against it to remover the wiper

@Trash2TreasuresOFL Жыл бұрын

After watching this video I have no idea how mine flew off onto the road while it was storming. Thanks for the video.

@Flashback502 Жыл бұрын

Lol Your very welcome, Glad could help. And thanks for comment please subscribe and share.

@emilyschaffer Жыл бұрын

Out of several other videos I watched yours by far was the most helpful and made it seem so much easier. I'm very happy that you posted this video. Thank you.

@Flashback502 Жыл бұрын

Your welcome glad could help please subscribe like and share and check out our other helpfull videos.

@mockingbirdwishmeluck6403 3 жыл бұрын

I knew when I heard the accent, I was gonna like this one. Thanks for the vid...gonna try it out in the Subaru.

@Flashback502 3 жыл бұрын

Lol Your very welcome, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos

@peterbenton8490 3 жыл бұрын

I like that you just got right to the point and didn’t put a whole bunch of extra stuff in the video

@Flashback502 3 жыл бұрын

Your welcome👍, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos

@johnparson9573 2 жыл бұрын

It’s a miracle you didn’t bust your windshield out using a claw hammer in place of a puller.

@PeterPeterPvssyEater Жыл бұрын

Clear, concise, and straight to the point. Good video!

@Richard-lm4qu 5 ай бұрын

Bolt? Screw? It's a "nut." Now I can replace my wiper arm without paying $350.00 like I did for the first one! Thank you!

@antonydicker7615 Жыл бұрын

Nice to see he cares about the paintwork 🙈

@clintperez9981 3 жыл бұрын

Nice, just gotta watch out that you don't crack the windshield with that hammer.

@Flashback502 3 жыл бұрын

Yes agree👍Please subscribe & like and share if haven't already and check out our other helpful videos

@forestaeon Жыл бұрын

Just fixed my stripped wiper with help in part from this video. Thanks!

@Flashback502 Жыл бұрын

Your welcome glad could help please subscribe like and share and check our my other helpfull videos.

@hersonlamolli6276 2 ай бұрын

Thank you very much, great teacher.😊

@Flashback502 2 ай бұрын

You're welcome! Glad could help Please subscribe like and share and check out our other helpfull videos

@weirdbrat Жыл бұрын

Thank you so much!! I’ve searched for this so many times & you’re the only one who helped

@Flashback502 Жыл бұрын

Glad I could help!

@Slevin_Kalevra Ай бұрын

You just saved me. Awesome stuff

@Flashback502 Ай бұрын

You're welcome! Glad could help Please subscribe like and share and check out our other helpfull videos

@jamescarroll0615 2 жыл бұрын

Straight and to the point. Perfect video. Thank you.

@Flashback502 2 жыл бұрын

Your very welcome Glad could help👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos

@Holpopov 5 жыл бұрын

Very useful. Been wondering how to remove my old wiper arm!

@Flashback502 5 жыл бұрын

Thanks for watching glad could help. Please subscribe if haven't already and check out my other helpful videos.

@gbkclan5447 2 жыл бұрын

This was very helpful and straight to the point thanks man and keep on posting these good videos but it looked like you where going to crake the window but you didn’t and I’m glade cause a new window would have costed a good bit

@Flashback502 2 жыл бұрын

Lol yea rubber hummer would have been better, please subscribe like and share and check our my other helpfull videos.

@Began2011 5 ай бұрын

Thanks for the video.

@NK-ox9uo 8 ай бұрын

Thank you for the help!

@saramartin179 Жыл бұрын

Thank you so much for this 🙏🏽😭 somebody in nyc just quoted me $120 to fix this for the labor 😭

@Flashback502 Жыл бұрын

Your welcome glad could help please subscribe like and share and check our my other helpfull videos.

@dylansmith6119 Жыл бұрын

Thanks.. I am going to definitely be able to do this on my own

@Flashback502 Жыл бұрын

Your welcome glad could help please subscribe like and share and check our my other helpfull videos.

@pmaradiaga9073 Жыл бұрын

One of the besr clutch how to videos.

@Flashback502 Жыл бұрын

Glad it helped. Please subscribe like and share.

@danielwalker3319 3 жыл бұрын

Thanx bro, I just used my claw hammer and it did pop right off!

@Flashback502 3 жыл бұрын

Your welcome, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos

@user-jt4vv1mq4t Жыл бұрын

the greatest video.

@felipe-emilefrancoeur3215 7 ай бұрын

Thanks brother!

@matterdaddy3363 3 жыл бұрын

Great job man, throwing up a like and comment to help out.

@Flashback502 3 жыл бұрын

Thanks for 👍 glad could help thanks for comment

@Mike-jz6mo 3 жыл бұрын

Thanks bro other people made it so hard on KZfaq

@Flashback502 3 жыл бұрын

Your very welcome Glad could help👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos

@jackwinters8028 2 ай бұрын

Thank you very much

@Flashback502 2 ай бұрын

You are welcome

@irvine434 Жыл бұрын

Thanks for the vid

@oldguy8177able Ай бұрын

thanks

@graves47 2 жыл бұрын

Thanks man, this was helpful

@Flashback502 2 жыл бұрын

Your very welcome Glad could help👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos

@msrebro2698 2 жыл бұрын

Excellent. Thanks!

@Flashback502 2 жыл бұрын

Your very welcome Glad could help👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos

@TrueReviewSportsNews 2 ай бұрын

Good shit g, my girl broke mines

@Flashback502 Ай бұрын

You're welcome

@martinmoralesalvarez2689 Жыл бұрын

Amazing video

@Flashback502 Жыл бұрын

Thanks!

@daves2822 Жыл бұрын

Mark the post top, then down the threads and mark the wiper arm one continuous marking to replace the arm easily. I would not recommend using a hammer against the windshield, it may work. But it may not. Metal and glass

@gfacousticmusic1756 Жыл бұрын

Thanks man👍🏼👍🏼

@alexadams9644 Жыл бұрын

Watched several videos. You showed how to get nut cover off best thanks.

@Flashback502 Жыл бұрын

Your welcome glad could help please subscribe like and share and check our my other helpfull videos.

@JuanHerrera-ve4lh 2 жыл бұрын

thanks a lot brother!

@Flashback502 2 жыл бұрын

Your very welcome Glad could help👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos

@TheRealBatCave 2 жыл бұрын

Has this done at the shop, and when i picked it up there was a nice quarter size chuck taken out of the paint onnthe hood, how do u think that happened?

@reneeca5696 2 жыл бұрын

Thank you! This is so clear and makes it look so simple! :)

@Flashback502 2 жыл бұрын

Glad could help👍Please subscribe & like and share if haven't already and check out our other helpful videos

@leheithcarter1134 Жыл бұрын

Thnx 4 the details bro

@Flashback502 Жыл бұрын

Your welcome glad could help please subscribe like and share and check our my other helpfull videos.

@CrewExpendable2007 5 ай бұрын

So after doing this I bought brand new wiper arms, that dont have the spline pattern already tapped into the hole where they slide on. The stalks of the wiper transmission of course do. Is it same procedure or am I then going to strip the stalks on the transmission? Not sure how to attach them…

@leemartinez4428 10 ай бұрын

I need the nut that holds the wiper arm on mine keeps getting loose

@danielbell9779 2 жыл бұрын

What should the nut be torqued at for reassembly?

@mc-um3nv 2 жыл бұрын

Thanks man! Trying this tomorrow

@Flashback502 2 жыл бұрын

Your very welcome Glad could help👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos

@YouStink86 Жыл бұрын

Thank you sir

@Flashback502 Жыл бұрын

Your welcome glad could help please subscribe like and share and check our my other helpfull videos.

@OtayBuckwheat 5 ай бұрын

Splines and a tapered shaft

@Hawaiianstyle-dz4xb Жыл бұрын

Thank you for explaining it the way you! I understood everything!

@Flashback502 Жыл бұрын

Your welcome glad could help please subscribe like and share and check out our other helpfull videos.

@t.d.b3 Жыл бұрын

THANKS👍🏿

@Flashback502 Жыл бұрын

Your welcome glad could help please subscribe like and share and check our my other helpfull videos.

@TheRobbs Жыл бұрын

I have a 05 Chevy Venture minivan. I have tried everything to get my windshield arm off! Nothing has worked. Any suggestions?

@simpleme5719 2 жыл бұрын

This helps,I hope I don't mess it up.

@Flashback502 2 жыл бұрын

Your welcome glad could help please subscribe like and share and check our my other helpfull videos.

@ForestWoodworks 2 жыл бұрын

This helped me today. Thanks boss!

@Flashback502 2 жыл бұрын

Your very welcome Glad could help👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos

@LeFraudHasChokedInSIXFinals 6 ай бұрын

Brilliant! Maybe put a pad between the hammer and the glass.

@stevecarlson6462 Жыл бұрын

Some penetrant on the splines could be helpful if you have time.

@PatriotCoinRings 3 ай бұрын

Nice tip on the ribbing and why I couldn't pull mine up after removing the nut but damn bro, you about busted your windshield there. maybe a towel or mat for protection?

@Flashback502 3 ай бұрын

Yes agree 👍🏿 glad could please subscribe like and share and check out our other helpfull videos

@ErockerisDerlargcock Жыл бұрын

I am having a hell of a hard time finding windshield wiper arms that have the rivits, I've got a 2000 blazer, and all the replacement I've found no longer have rivets.

@Flashback502 Жыл бұрын

Yea will have to check ebay or junk yard. Please subscribe like and share 🙏.

@sketchbreaker 6 ай бұрын

Hi, can someone please help me I’m desperate I have a 2004 Volvo XC 90 I have done this exact procedure but when I turn the wipers on and they stop they keep stopping in the up position. I’ve been working on cars for 20 years and I cannot figure out why the hell it’s doing this??????

@Flashback502 6 ай бұрын

You May have a bad windshield wiper motor

@dylanjoseph9687 3 жыл бұрын

Thanks man I got to switch mine out . An ex gf broke them off so I had to buy new wiper arms lol

@Flashback502 3 жыл бұрын

Lol Your very welcome Glad could help👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful video

@mc-um3nv 2 жыл бұрын

For those cracking their windshields, throw some cardboard and a rolled up rag anywhere you might hit the glass. There is no reason you should be breaking windshields with this method?

@WeAreBoredFilms 2 жыл бұрын

I don’t recommend the hammer I did it and cracked my windshield but I used the fancy tool and took it off just remember when removing the arm you have to lift the wipers and pull

@Flashback502 2 жыл бұрын

Thanks for tips. Please subscribe & like and share if haven't already and check out our other helpful videos

@jS-wd9pl 2 жыл бұрын

Shade tree mechanics saving us what they can

@Flashback502 2 жыл бұрын

Lol 👍Please subscribe & like and share if haven't already and check out our other helpful videos

@AnthonyJohnson-mx3kp 10 ай бұрын

what if they are just faded-can you paint hem?

@Flashback502 10 ай бұрын

Yes

@luispalomino5514 15 күн бұрын

👍

@Flashback502 15 күн бұрын

👍🏿 You're welcome! Glad could help Please subscribe like and share and check out our other helpfull videos

@walrus4248 Жыл бұрын

There's a puller to do this, but I think it's hard to get one that small.

@Flashback502 Жыл бұрын

Yea and hard to find. Glad could help Please subscribe like and share 🙏.

@biancaadame514 Жыл бұрын

Where’s the best place to get the arm?

@Flashback502 Жыл бұрын

Junk yard or ebay. Glad could help Please subscribe like and share 🙏.

@godfrey_of_america 2 жыл бұрын

NOT the aame for most vehicles

@syawaalmeerasa7576 10 ай бұрын

Bro... instead of hammer just use wd40 or something to loosen the bolt

@sketchbreaker 6 ай бұрын

I replaced that already with used one

@kevinbarnett7620 Жыл бұрын

The hammer didn’t work. I gotta find away to get these things off or I won’t have wipers

@shahsuleman7552 2 жыл бұрын

Holy ding sound. I thought windshield is gone..

@totalchips6547 Жыл бұрын

Hi, I guess I wasn't gentil and now I have a cracked windshield...