Workshop Jib Crane

Workshop Jib Crane - BUILD

Рет қаралды 529,655

2 жыл бұрын

In this video im making a crane for my workshop. It wil be usefull for moving around heavy items in my workshop and lifting engines in& out of projects!
Thanks for watching

Пікірлер: 262

@rjung_ch 2 жыл бұрын

Looks great, make sure you have a stop at the end so the motor won't roll off the end there.

@tonywhite6107 2 жыл бұрын

If you look closely there is one!

@GregoryJohnston77 7 ай бұрын

Do you really think a guy who's talented enough to build a crane wouldn't know too put on a stopper? Lmao

@spar1993 4 ай бұрын

@@GregoryJohnston77Uhhhhhhhh......... I've uhhhh built similar things and uhhhhhh.... Look... we aren't all the brightest that's all I'm saying.

@rallymax2 Ай бұрын

@@tonywhite6107all I saw was the power cord holding it back. It needs a metal screw on bracket.

@FJ80Coop 2 жыл бұрын

Althoughwe aren't related nor know one another personally I am so proud of your skills and dedication every time that I see you fire up that home made lathe as I've worked with lathes of every brand and size bed over the past 40 years and never seen one built @ home that works as well as yours... You do such good work with very professional results using only the simplest of and homemade tools.. Pat yourself of the back as you've worked very hard and deserve it. ..

@homemade_madness 2 жыл бұрын

Thanks so much!!💪🏻👊🏻

@AMetalWorks 2 жыл бұрын

Love how you worked around the low sloping ceiling with this design. I'm definitely going to use many of these design elements and build myself a similar crane for my shop. Maybe two of them. I have a CNC Plasma table that needs one and a Big Lathe that also needs one.

@homemade_madness 2 жыл бұрын

Yes that was the main reason i went with this design!

@robh3267 2 жыл бұрын

I loved how you turned the wheels down so they will track, I hope you never have to move, your a perfect example of using thought and innovation to make the best use possible of the space you have available, excellent work as always.

@petermackey239 4 ай бұрын

L9 15:19

@ProjectBrupeg 2 жыл бұрын

I love that you lifted yourself as a load. I feel like your my workshop spirit animal.

@homemade_madness 2 жыл бұрын

Haha yeah i dibnt have any other weight around😅

@joekeller5417 Жыл бұрын

I made one like this and it works very well in my small shop. Just pulled the engine out of my 1962 ford 2000 tractor no problems.

@Equals488 Жыл бұрын

I loved the telegraph welding, during the weld of the crane arm. 😆 🤣 😂 I love this guy's builds.

@bchant19 Жыл бұрын

I love how simple your designs are, nice job.

@No1karez 2 жыл бұрын

I use to hang my dirt bike from the ceiling to strip it down and service it.. so much easier, faster and more enjoyable. I like your idea, the electric winch is a nice touch 👌 👍

@eduarddvorecky3731 2 жыл бұрын

Good job. Just 2 things. First is obvious. Screw in the stop at the end so engine and load won't suddenly roll off the end. And second is you should probably fix top and possibly even the bottom part of the static structure (before the hinge) to prevent it from folding sideways when you'll be lifting stuff on the sides. That would cause instant fail of the crane.

@WaldosWorld 2 жыл бұрын

I need something like this for my future shop. You've inspired me to build one instead of buying 👍

@andrewk8636 2 жыл бұрын

Check out Andrew Camerata video as well! Looking forward to your build!

@homemade_madness 2 жыл бұрын

Ill be waiting for your build😉 im sure it will be alot beefier😅

@slavyanskie_budni 2 жыл бұрын

Супер. Спасибо за отличный контент. Я из Германии. Буду смотреть твои проекты. Это очень вдохновляет. Удачи.

@WheelieDad 2 жыл бұрын

Nice bit of kit! Just need a bump stop at the end of the crane.. 👀 Every time it slid to the end under weight my heart dropped! 🤦🏼‍♂️🤣

@Hellsong89 2 жыл бұрын

He posted that there is big bolt and washer there. It cough my eye too but saw something there to stop it, so didnt mention it.

@homemade_madness 2 жыл бұрын

It has luckily😁

@danvandertorre6349 2 жыл бұрын

very good work you are on your way to being one of the best fabricators on youtube never stop building, one thing you need now to improve your skills, even more, is a milling machine, it is a good thing you made the lathe first that will make your job much easier, good luck young man we are counting on you.

@antoniocarlosrocharocha4629 9 ай бұрын

Sensacional. Mais uma do gênio! Parabéns.

@MrSkeeter18 2 жыл бұрын

You are going far in life. Thanks for sharing

@bamcustoms7327 2 жыл бұрын

Very inspiring, have been wanting to do something similar for a while myself. Be careful, a very common misconception, doubling the line does not double the lifting capacity of the crane or Jib!!! It simply reduces the winching force required to lift by 1/2(doubles the lifting capacity of the winch, not the crane). I've seen actual cranes upset because the logic of a 2 part line were misunderstood by the operator. From what I can see, your build can easily support 500Kg, always a good idea to over engineer, Good job!!! Looking forward to more.

@mr.hauskatze6055 2 жыл бұрын

Wow fantastic Job. Big respect. I want them too for My Garage

@mrsockyman 2 жыл бұрын

That's awesome! would love to do something like this when I have a perminant workshop

@Thewatson77 2 жыл бұрын

Very handy to have 👍🏼 great work

@redsquirrelftw 2 жыл бұрын

Wow that's really cool. I'll be finishing my garage to use as a workshop (not much bigger than that space) and it might be something I consider building.

@breakit2makeit393 2 жыл бұрын

Class job. Doing one soon myself .real handy to have. Love seeing your videos

@homemade_madness 2 жыл бұрын

Thanks!

@homemadetools 2 жыл бұрын

Excellent crane build. We shared this video on our homemade tools forum this week 😎

@be007 2 жыл бұрын

mooi gemaakt man ! 1 advies, doe ff bovenin nog 2 schoren lassen/plaatsen voor als je de kraan helemaal in de haakse stand hebt (de stand zoals je de tractor optakelde), want die paar boutjes in het plafond lijken mij niet genoeg om het torderen tegen te houden in de haakse stand.

@homemade_madness 2 жыл бұрын

Bedankt! Moet wel goed komen, heb het plafond daar verstevigd met extra balken

@maribelbellotmena4444 2 жыл бұрын

siiiii Señorrrr eres un verdadero MAKINAAA, buen trabajo. EL PATRIARCA PEPE. 67 años

@user-ot4zx6te9z 2 жыл бұрын

Браво👏👏👏👏Thanks for sharing the video.

@chrisjames6349 2 жыл бұрын

Hey, I’ve just found your channel and love the content. I’m about to build a crane for my shop too. I don’t want to sound like the safety police but please do yourself a favour and put on a respirator. At least a P3R one to stop the dust from the angle grinder. I know they’re a pain but now I put mine on as soon as I get in the shop and keep it on all day and don’t even realise it’s there. I have an engineer friend who’s job it is to look at the long term effects of dust exposure (he does the sample tests etc) they say the mid and long term effects of angle grinder dust and welding fumes is a much bigger problem than people think. Im talking taking decades off your life! We all wear glasses and ear protection because the effects can be felt straight away but people don’t bother with their lungs so much. I’m not trying to preach, just a concerned fellow metal worker. Take care mate and keep up the great content.

@sddiymakeitworthit7512 2 жыл бұрын

Excellent job 👍

@muddyfences5559 2 жыл бұрын

That is so cool. Now I want one.

@adsalsalam3904 Жыл бұрын

Amazing project! Greetings from Iraq

@roadboogalabuilds5318 2 жыл бұрын

Great job as always 👍🏻

@jt9498 4 ай бұрын

That is pretty cool! Great job!

@user-bu4pf6xk6y Жыл бұрын

This is really what i want to make. Nice Reference video! Thank you

@Imwhisper76ontwitch 2 жыл бұрын

Absolutely amazing. Is there a block at thr end to prevent that from rolling off?

@homemade_madness 2 жыл бұрын

Yes, bolt with big washer!😁

@Imwhisper76ontwitch 2 жыл бұрын

@@homemade_madness awesome!!! Can't wait for the next upload!! Absolutely stellar!

@hilltopmachineworks2131 2 жыл бұрын

Enjoyed. At some point I will build a jib crane for my shop.

@buildingseriyrm3736 Жыл бұрын

Замечательный кран 👍💪💪

@CALIFASgarcia 7 ай бұрын

Nice crane idea great job keep up the good work 👍💯

@craigguinn5423 4 ай бұрын

Nice design and fabrication. I may make a similar one for lathe Chucks and heavier tools. I like the bracing. I have a 2x6 wall to brace to. I just updated a floor crane for heavier stuff.

@ralphjennings9064 2 жыл бұрын

I like the design of the trolley and hoist.

@cutlow1383 4 ай бұрын

Great build.

@Helloverlord 2 жыл бұрын

You need to fix that cabinet door lock! Nice crane!

@homemade_madness 2 жыл бұрын

Yes haha🤣 or just lock it😅

@rjung_ch 2 жыл бұрын

😂😂😂

@arunkatiyar729 Жыл бұрын

Very nicely done👍

@mikebaee7731 3 ай бұрын

Very inspiring, thanks for sharing :)

@kulebyakinjoe 2 жыл бұрын

VERY USEFUL THING IN THE WORKSHOP

@jamespayne8781 Жыл бұрын

Good use of thin wall tube to create a very strong frame.

@atsadawutnambut6767 Жыл бұрын

Wow, I like video clip. I’m follow you.

@villegas5874 8 ай бұрын

Cool. Good job men. 👏

@V1N_574 2 жыл бұрын

Nice work!

@GxsieteRaySimRacerGTX 2 жыл бұрын

Fantastic 👏👏👏

@richardculbertson8027 2 жыл бұрын

Cool idea does it have the ability to lock the cartridge in place or at the end

@pinoyrcmaker72 2 жыл бұрын

Looks awesome, keep it up bro

@williamcrain1321 Жыл бұрын

great work mate

@sport1349 2 жыл бұрын

Je bent een genie, ik als gepensioneerde ondernemer, had jou heel graag in mijn bedrijf willen hebben.

@MrStarlin51 2 жыл бұрын

Very cool and useful

@ZwervenmetJuKi 2 жыл бұрын

Sterk genoeg en mooi gemaakt, ziet er netjes uit, complimenten weer👍👍👍👍

@homemade_madness 2 жыл бұрын

Bedankt!

@ahxxx68 2 жыл бұрын

amazing work :-)

@ariel.cervantes 2 жыл бұрын

at minute 12:58 a ghost opens the back door Nice job bro! Congrats!!!

@narrowroadtransport8318 2 жыл бұрын

Nice build

@TURBO5KONING 2 жыл бұрын

on my exact same winch the 2 countersunk bolts that hold the motor assembly to the metal plate snapped off while under load, chinesium quality. changed them for 10.9 high tensile bolts and now a year on no problems.

@homemade_madness 2 жыл бұрын

😯😯

@randytravis3998 2 жыл бұрын

i would add bolts to hold the winch to your rolling plate ,, I see you welded it ,,just be a bit safer with some bolts also just in case a weld cracks or breaks ,, don't need a engine to drop on your head ..also check your winch cable from time too time .. the wires do wear out and start breaking ,, also keep a eye on the bolts in the wall make sure they stay tight .. just some advice

@penfold357007 7 ай бұрын

Nice job. I probably missed it, but what stops the hoist running off the end of the track? I didn't see you weld on a stop. Hope it makes life easier. Thank you for sharing your content.

@guypatts494 Жыл бұрын

Nice work 💪

@LukeTheJoker 2 жыл бұрын

Good looking crane, it follows the roofline nice with that truss girder. Just a couple of queries, what size and grade are the bolts you are using as pivots? By the time the load is out on the end you could be talking 1500+kg of shear force on the top one, I also hope your wall and roof mounts are into something strong, it is not clear in the video, but if they are just bolted/screwed into a timber frame it could easily be a failure point. Thanks for providing a good example for new builders by not removing the guards from your angle grinders, although I will say that you should get some welding gloves, skin cancer is no joke and sunburn on your hands hurts real bad...

@homemade_madness 2 жыл бұрын

Thanks! it are 12mm shanked bolts wich will not shear all that easily i think. its screwed to a timber frame wich is mounted to a concrete wall of the building nextdoor. I made sure to make this part of the workshop extra strong when i built it, because ive been wanting to build this crane for a while. extra roof rafters and stuff like that

@scoc253 2 жыл бұрын

*brilliant mind!* 💯👌🏽🧠👏🏽

@chrishayes5755 2 жыл бұрын

nice work fella. you earned yourself a new sub.

@davidsalamoun6140 2 жыл бұрын

WOW NICE WORKSHOP

@jimsvideos7201 Жыл бұрын

Well done.

@rayh7264 2 ай бұрын

Fantastic work! Very impressive. What deflection do you get at the end with 500 kg load? I’d be keen to find out a limit.

@rightwinggunslinger1 2 жыл бұрын

Dude your awesome! Keep at it! Cheers from minnesota.

@homemade_madness 2 жыл бұрын

👊🏻👊🏻

@bitp1mp 2 жыл бұрын

What a beauty. Did you CAD this first? How do you design this stuff!?

@diymarcelosantana 2 жыл бұрын

meus parabéns !!!

@DktheWelder 2 жыл бұрын

That’s perfect! Not over built I think you made it just right! Now I’m thinking of what engines weigh 500kg haha , v8???

@Hellsong89 2 жыл бұрын

Those cheap china witches i would never put on full rated force, specially after while in use with out safety lift test. Had few boat winches that suppose to hold all the way to 900kg. Put some some weight on it and locking mechanism slipped and thing went free willy. Thankfully nothing major happened, but as rule goes, never go under load that is not entirely secured with physical support, like when working on car, put the rim/rims under the frame and maybe even drop it on them and put little pressure on the lift. If it falls off or lift/jack fails there is something stopping it from crushing you, same with those cheap car jackstands. Almost lost a foot when didnt listen to this rule, lift the car and didnt notice lift disk was partially on the roll bar. Went to work on the brakes when suddenly it moved and whole hub shot down from the twisting force of the roll bar and spring combo. If i had my knee under it... uuuf

@homemade_madness 2 жыл бұрын

Yeah not sure about te 500kg tough😅 next project is 4cilinder engine luckily

@internettoughguy 2 жыл бұрын

@@Hellsong89 A boat winch is not a hoist. It's only intended to pull horizontally regardless of the rated load capacity. Lifting hoists for overhead lifting are specifically designed with proper safety rated brakes. You're playing a dangerous game if using anything other than a certified hoist for overhead lifting. Personally I would never rely on a cheap Chinese junk winch for overhead lifting. My life isn't worth the gamble.

@lennym1273 2 жыл бұрын

Nice really nice, you always do good work...

@homemade_madness 2 жыл бұрын

Thanks!👊🏻

@alnegri9552 Жыл бұрын

Fantastic video! Please excuse my ignorance but I’m new to welding. Wooden welding table, no gloves, no fire? I assume your “welding table was reasonably flat? Great job! You’ve inspired me!!

@petermines3575 2 жыл бұрын

Awesome.

@marto.4427 2 жыл бұрын

Amazing functional and simple, wht else do you want

@bikescarsandmore6156 2 жыл бұрын

Very cool madness 👍

@homemade_madness 2 жыл бұрын

✌🏻✌🏻👊🏻

@alitn588 2 жыл бұрын

Nice crane . can you use it for a heavy staff on a lathe ?

@peterpyzer 2 жыл бұрын

Very nice Video Like allways :)

@dapperdave2090 2 жыл бұрын

nice... very nice 👍😎👍

@zacharybronk6855 4 ай бұрын

This thing is cool but you should consider adding a brake/locking clamp to the roller so it won’t roll around

@timothywilliams2021 2 жыл бұрын

Keep up the good work. Looks like you could really use a drill press and a chop saw.

@homemade_madness 2 жыл бұрын

Yes😅😅 next machine build

@user-tj9xs2un1m 2 жыл бұрын

Удобная штука и сделало качественно .

@rrmarbleandgranite5780 10 ай бұрын

Looking for a trolley like this. Where did you find it? Great job by the way

@hernanvalderramalara2587 Жыл бұрын

Muy bueno , excelente

@lightscrafts 2 жыл бұрын

Nice! 😃👏

@kentuckytrapper780 2 жыл бұрын

Excellent job young man, most people your age can't plug in a welder let alone use one. Keep up the great work.

@brkibrle1213 2 жыл бұрын

You should consider adding some sideways support if you are going to use the crane at the angles. Wish you good luck.

@jpuop 2 жыл бұрын

Good stuff mate.. I would suggest wearing gloves, all that arc rays will catch up on you 👍🏽 love the channel

@andrographis 2 жыл бұрын

Think about adding an antidrop plate to the trolley, if those bolts/wheels fail would be nice if it didn't fall and chop your fingers off or pin you under the crane. Also not a good idea using a pulley to double your lift capacity when the weak point is probably elsewhere and you haven't tested it at rated capacity or allowed for dynamic loading (assume 125% when your bouncing from speed 1/2). An end stop or keeper plate would also make sense, looked like the trolley was coming off on your head when lifting the bike.

@deadslow201 2 жыл бұрын

Whats the size and grade of those pivot point bolts?

@homemade_madness 2 жыл бұрын

M12 8.8

@deadslow201 2 жыл бұрын

Those will wear down/ you could add for example nylon bushings, and preferably replace those bolts with Hardox round bar or similar. Another issue might be those rollers bolts. You could add safety "claws"; in case bolt snaps, the sled does not fall down.

@akbarkarimzadeh7789 2 жыл бұрын

lathe is very impressive

@homemade_madness 2 жыл бұрын

Yes i love using it too👌🏻👌🏻

@crazymtbrider 2 жыл бұрын

Well I've never seen anyone do a doughnut quite like that🤣well done lad

@homemade_madness 2 жыл бұрын

Haha yea nice one right😜

@khorsheedm.shareef3464 2 жыл бұрын

good job

@brandenpatterson2776 2 жыл бұрын

Great build when I get my new shop maybe you can help me build one lol!

@jimqossim2554 2 жыл бұрын

You are a genius! Please do me a favor, build a DRILL PRESS!!

@user-dv7jb1gd5j 5 ай бұрын

와우 최고의 윈치네요 ㅎㅎ

@TUTON808 2 жыл бұрын

сделано очень хорошо, только ограничителя хода нет на конце консоли. может слететь тельфер.

@internettoughguy 2 жыл бұрын

Did you do any basic calculations to determine what safety factor you have when hoisting max capacity 500kg? You should proof load it to at least 750kg (150% of max capacity) to make sure nothing is bending.

@pauldorman 2 жыл бұрын

Absolutely agree that the crane should be load tested, but does the 500 kg label refer to the hoist, or the crane as a whole? Great work though. The only think that concerned me was the lack of adequate protection while welding. Intense ultraviolet light and bare skin is never a good combination!

@internettoughguy 2 жыл бұрын

@@pauldorman Whatever the label says should be the capacity of the entire system and not just the individual component. This is industry standard. Imagine what would happen if the jib can only support 250kg before bending but the hoist says 500kg. How does someone even know they should not lift more than 250kg? They wouldn't know. They rely on what the label says so that label should be the rated capacity of the weakest component in the entire system.

@pauldorman 2 жыл бұрын

@@internettoughguy I have to agree with you. At first I thought the capacity was original to the winch, but then looked again. 500 kg at the end of the crane would probably bring the wall down!

@Myrius69 2 жыл бұрын

looks like a death trap to me

@robbourns2831 2 жыл бұрын

You should really get some center drill bits. They are thick stubby bits that will get a nice starter hole centered up easily. They are inexpensive too