X-Winder 4-Axis Model 4X-23 in Action !
Рет қаралды 53,459
9 жыл бұрынNew for 2015 - X-Winder introduces the new 4-Axis Model 4X-23
4X-23 Specs:
Frame and Carriage: standard 1" aluminum extrusions
Length: up to 20 feet (3m) - Long Bars NOT Included (see Long Bars)
Mandrel width: up to 8" (200mm) in width
Mandrel Max. RPM: 90
Carriage Max. Speed: 8in/s (200mm/s)
Electrical Power: 110v/220v AC with 24V/3A DC to the stepper motors
Mandrel & Carriage Motors: geared NEMA 23 stepper motors with 800 oz-in (60 kg cm) holding torque
Delivery Head Motors: geared NEMA 17 stepper motors with 250 oz-in (20 kg cm) holding torque
Drive Belts: "L" type 1/2" (12mm) wide for carriage and mandrel and "XL" belts for delivery head
Filament Tension: adjustable strap friction mechanism
Reel Holder: single reel standard or dual reel option (see dual reel)
Resin Bath: 6 fluid ounce resin bath (170 cc^3)
Carriage Wheels: custom dual bearings with 8mm axle
Electronics: switch controller box and 4 axis controller boxes with USB cables (not sold seperately)
Software: X-Winder Designer program and Executor software packages standard (not sold seperately)
@mahrezaitm.5162 2 жыл бұрын
Hi Turner, I'm still wondering how you can get the mandrel out of the pressure vessel once the filament winding is done. Any tips on how the mandrel gets removed? Also any thoughts on the liner buckling due to the applied winding load in case you do have a liner in your design. Thank you
@jackhydrazine1376 9 жыл бұрын
Do you think you'll develop a mod kit that will allow you to turn a mandrel larger than eight inches in diameter?
@wombatau 9 ай бұрын
Ahh yes, Billy Sweatpants by Markel Jarkson
@ayyazali9499 4 ай бұрын
I have problem operating the x winder, the carriage fails to return to the origin Any help will be appreciated
@1paulromero 3 жыл бұрын
Hello Turner. Thank you for your video! I am posting my team and I own one of these winders are having trouble setting up the code. We are having issues with the head diving in to soon on the ends and with the head retracing in a non-curved path. Would it be possible for you to share the sets and pattern g-code for this run? Thank you!
@x-winderfilamentwinders1701 3 жыл бұрын
contact me through our web page - www.xwinder.com - thanks
@artpanda9853 5 жыл бұрын
How do you remove the mandrel in this type of 4 axis filament winder?
@GavynPendleton 5 жыл бұрын
That's exactly what I am wondering
@RBAERO 4 жыл бұрын
This time is manufacturer is not demolded the mandrel is part of the structure. I think this mandrel is used only for example.
@janoduniya2790 4 жыл бұрын
Hlo
Clough42
Рет қаралды 210 М.
SL IDEAS
Рет қаралды 65 М.
Turner Hunt
Рет қаралды 74 М.