TIG Welding X-Ray Hack! TIG Technique For Pipe Welding!

Рет қаралды 500,233

11 ай бұрын

TIG Welding X-Ray Hack! TIG Technique For Pipe Welding!
In this video, I'm excited to share an exclusive TIG welding technique that I've discovered for pipe welding. Join me as I take you through the step-by-step process of mastering this innovative method that yields impeccable results.
🔥 TIG Welding Technique Unveiled 🔥
If you've been looking to elevate your pipe welding skills, you're in for a treat! I've uncovered a hidden gem of a TIG welding technique that brings a whole new level of precision and finesse to your welds.
🛠️ What You'll Learn 🛠️
From setting up the perfect weld joint to controlling the torch with finesse, I'll guide you through every aspect of this technique. I'll cover how to achieve optimal root pass penetration, maintain consistent filler rod control, and flawlessly execute the cap pass.
👁️ X-Ray Insight 👁️
Ever wondered what's happening inside your welds? With this technique, you'll gain a deep understanding of the inner dynamics of your weld through X-ray-like clarity. It's like having a behind-the-scenes look at your work, enabling you to refine your skills like never before.
🔗 Join the Welding Community 🔗
Welding enthusiasts, beginners, and seasoned pros alike can benefit from this technique. Whether you're tackling your first pipe welding project or aiming to perfect your craft, this tutorial is a must-watch.
🔔 Stay Updated 🔔
Don't miss out on this welding breakthrough! Hit the notification bell and subscribe to my channel to receive updates on new welding techniques, tips, and tricks that I regularly share to help you excel in your welding journey.
🔗 Connect with Me 🔗
Have questions or want to share your own experiences with this technique? Drop a comment below and let's start a conversation. Your insights and feedback are invaluable to the welding community!
Get ready to witness a game-changing TIG welding technique in action. Let's dive in and uncover the secret to achieving flawless pipe welds like never before. Remember, mastery comes with practice, so grab your gear and let's weld!
None of these videos are recorded in a fancy shop surrounded by sponsorship banners!
My videos are recorded at working sites in various locations and welding positions.
90% of my welding projects in videos are x-rayed, and if you like to see hands-on projects, welcome!
If you liked this video please give it a thumbs up, share it, subscribe, and click the bell.
It doesn’t cost you anything but massively helps my KZfaq channel. Thank you.
Support this channel with 🔔 Subscribe and 👍 Like!
I appreciate every donation, no matter how big or small. Your support means the world to me and allows me to continue doing what I love.
Donate rb.gy/34q2c

Пікірлер: 144

@real_stickyy2062 11 ай бұрын

I will always respect the fact that you take time out of your day to teach us. Grinding to become as good as you ❤

@X3MTIG 11 ай бұрын

You got this!

@tigerblack1056 9 ай бұрын

@@X3MTIG❤

@tmdwu3110 8 ай бұрын

He's on the job clown.

@billy.b652 8 ай бұрын

Very neat indeed. Being a ex Babcock n Wilcox welder, and now retired, your welding is impressive, and immaculate. Where this technique was used on petrochemical plants, and not a workshop, it was a bigger challenge, and an even bigger one, if it was thin wall stainless steel. To say the least, it was a nightmare if it was windy, as you had to watch your argon flow into pipe. And the frustrating thing of being that welder was, that you could go from hero, to zero, if you had repairs on your pipework. At the end of it though, I enjoyed the challenge. So long live you welders out there, and try not to breath to many fumes, and use a air feed helmet, when you can. 🥳🏴󠁧󠁢󠁳󠁣󠁴󠁿🏴󠁧󠁢󠁳󠁣󠁴󠁿🏴󠁧󠁢󠁳󠁣󠁴󠁿

@jurgenfleck6575 4 ай бұрын

Als Röntgen Prüfer kann ich nur sagen das ich das respektiere. Habe selbst mal WIG und Autogen gelernt. Immer zugunsten der Schweißer.

@unclegeth7899 14 күн бұрын

How times have changed I’ve just gone into my second year of my apprenticeship with the now Altrad Babcock

@dexa616 11 ай бұрын

Hvala na video snimcima i vremenu koje izdvajaš da podeliš informacije s ljudima.

@X3MTIG 11 ай бұрын

Zahvaljujem na komentaru 👊

@papajoecooking4425 8 ай бұрын

After I finished a weld and was required to grind and polish the weld joint I got very excited when no pin holes or undercut were visible. I always strived to be the best! Thank you for your video! AWS Certified since 1976

@Grrhc5t 10 ай бұрын

Привет. Пытался тебе перевести на русский через гугл переводчик ну често не очень . Жаль что нет титров хотя бы. А так ты молодец очень интересно тебя слушать и смотреть. Спасибо.

@JonathanRodrigoFagundes 23 күн бұрын

Very good welder!!!

@piet8803 8 ай бұрын

This was really satisfying to watch.

@commietube4273 11 ай бұрын

My hero

@khalidabouhassan5836 11 ай бұрын

Incredibly educational!!! You are the best, thank you man!

@X3MTIG 11 ай бұрын

Thanks brother 👊

@user-iq9zm8pn3g Ай бұрын

큰도움이됩니다

@spancj1 11 ай бұрын

outstanding content. thanks alot.

@X3MTIG 11 ай бұрын

Much appreciated!

@user-ho3nb8uj3p 3 ай бұрын

Love your patience, please keep doing what you are doing you are making me a master, thanks again

@X3MTIG 3 ай бұрын

You got it!

@jackmclane1826 8 ай бұрын

BEAUTIFUL arc shots!

@willmacrae652 11 ай бұрын

Brilliant video 😊

@X3MTIG 11 ай бұрын

Glad you enjoyed it

@brianbeaubien7371 11 ай бұрын

❤❤

@cameronmcandrew9745 8 ай бұрын

how simply you explain that, takes a lot of the tension out of how to best understand how the best result is achieved. That is the sign of a master.

@nox4293 11 ай бұрын

Super Video

@X3MTIG 11 ай бұрын

Thanks

@michaelhallas6450 11 ай бұрын

Very nice work

@SCBMusic1 10 ай бұрын

Thank you sir. Great illustration 👌🏿

@Jimmy-Legs Ай бұрын

Makes it look so easy. Like maybe I could do that ………….. I know better. 😁

@duaneduncan2380 25 күн бұрын

Anyone can weld man it just takes hood time i learned how to stick and mig as a kid when i got older no one would show or teach me tig so i read books about it and would stay after work 4 hours a day and they would ley me practice on scrap unpaid but i was happy about that i was using theyre equipment and material so i tell people when they ask me how i got so good and thats all it was practice

@lourencoantonio9565 11 ай бұрын

The best one, we'll explained and I liked for showing all the steps

@andresgonzalez9048 6 ай бұрын

EXCELENTE no encontre otra palabra para describir lo que vi en este video he visto muchos de sus videos y espero poder llegar a ser tan bueno como usted ,muchas gracias por compartir

@zaenalarifinikandanlas 6 ай бұрын

Sangat Senang Melihat Vedio Anda Tentang Pengelasan, Saya Hargai Telah Memberikan Edukasi, Walau Saya Kurang Penjelasan Tapi Saya Sedikit Makaud Tentang Gerakan Dan Maksudnya Thank You sir, Saya Terus Belajar Dengan Cara Ini Semoga Ke Depan Saya Jadi Tukang Welding Yang Berpengalaman🤝👍🏾👍🏾❤️🌹

@cameronkee.2214 5 ай бұрын

Thanks for your amazing videos! I’m always watching and learning! I wanna be as good as you one day!

@larrykeel2739 9 ай бұрын

Yes sir absolutely fantastic job I love tig welding and you definitely have skills!

@The_cross_boy398 4 ай бұрын

I love the way you walk the cup on your capping 😅❤❤ Secretly stealing your styles 😌😌

@RaphaelOdhiambo-lp9yp 2 ай бұрын

Wow I love you this

@softwarephil1709 8 ай бұрын

Beautiful work. 👏

@mohammadabuhamed3513 11 ай бұрын

Amazing video, thank you brother!!!💪🏽

@X3MTIG 11 ай бұрын

Glad you liked it!

@OG______ 11 ай бұрын

Your videos are so far the most informative and closest to the real life of a welder from what I found on youtube( I mean they are real life). Now I've been welding for ~3 years. I started to tig weld around 1-1.5 years ago, I believe that watching your videos made me learn the trade or at least the basics of it 10x faster and easier. I'm still learning something new every day, and I have a lot ahead of me. But anyways just wanted to thank you for sparing some time to make these videos they really help a lot 🤝👐👐

@X3MTIG 11 ай бұрын

Thanks for your comment bud, I appreciate that 👍👊

@nolanfrank582 11 ай бұрын

That is very well done! I need to work on my dipping technique. I always add too much material at the top of the pipe on my roots.

@martinvansoest421 7 ай бұрын

Ziet er prima uit....goed gedaan

@Cinta3plexs 8 ай бұрын

Insane job! 💯💯💯

@NelsonBarbero 9 ай бұрын

Exelente trabajo y video!!!!! Felicitaciones!!!!!! Un gran abrazo desde Argentina!

@totoy33 10 ай бұрын

베리굿👍🏾👍🏾👍🏾

@AK-kn9lq 11 ай бұрын

Great skills! I'm sure that one will shoot 100% clean

@X3MTIG 11 ай бұрын

It did 👍

@obaidurrahman6135 9 ай бұрын

Thank you very much for explaining the work very well❤️

@X3MTIG 9 ай бұрын

Glad it was helpful!

@obaidurrahman6135 9 ай бұрын

@@X3MTIG ❤️

@gsomoco2041 5 ай бұрын

Excellent work

@tonisiqueira9543 11 ай бұрын

Sim mestre acompanho seus ensinamentos e tenho me aperfeiçoado muito e assim posso compartilhar minha existência com irmãos da soldagem é um posicionamento em relação a tocha e o material de adição no enchimento ao acabamento e fica maravilhoso o nosso trabalho obrigado mais uma vez 🙏

@Mattoilers97 11 ай бұрын

Is PCL shop busy again

@Hnkka 8 ай бұрын

Thank you alot! Im learning to be plumber and my teacher suggest that i should train to be qualified/class welder too

@tonisiqueira9543 11 ай бұрын

Sim mestre observei bem essa apresentação e notei que a uma diferença de apresentação de posição da tocha em seu grau na hora dá soldagem quando está explicando e um e na soldagem é outro e sei que nem sempre mais no caso deve se posicionar em 75 gru no mínimo para depositar uma boa raíz obrigado pela orientação 🙏

@luckysakonta3724 5 ай бұрын

Beautifully executed ❤

@X3MTIG 5 ай бұрын

Glad you liked it

@ccarl7833 10 ай бұрын

Nice work man

@nealtouchet5028 10 ай бұрын

That's some pretty welds right there always awesome to see someone who has pride in their work keep up the good work my brother in the hood

@browill9 8 ай бұрын

I thoroughly enjoyed watching your video. Thanks for sharing. GBU

@X3MTIG 8 ай бұрын

Glad you enjoyed it!

@user-le1jf8xg7r 2 ай бұрын

Good job thanks for sharing

@dnyaneshwarwaghmare3961 10 ай бұрын

Very nice GTAW welding

@levaillant7910 6 ай бұрын

Nice

@ibereportesferrari8780 8 ай бұрын

Mestre!!!!! 👏👏👏👏🇧🇷🇧🇷🇧🇷🇧🇷

@maximemarty8544 3 ай бұрын

Hi ! I've been watching the channel more lately to practice for my pressure ticket, thanks for all the arc shots, it really makes it easy to see the different techniques, and I am now finding my groove between backfeeding the bottom and dipping on the side/top. I was wondering what insulators you are using on the heavy hitter 350, on mine the CK insulator for gas lenses do not fit well, I end up using either stubby gas lenses or a standard collet body, but I would like to be able to use my standard gas lenses as well as larger diameter cups too on this torch since I really enjoy how cool it runs for a gas cooled torch.

@X3MTIG 3 ай бұрын

All parts that I’m using for my HH 350 torch are from Miller, and never had any issues with them!

@user-mi3jm7rs7u 2 ай бұрын

Тоже понравилось😊

@milivojemarkovic5437 8 ай бұрын

Masterful

@willschwabenbauer2577 10 ай бұрын

nice welding!!

@bprevost54 8 ай бұрын

Looks good bro

@user-jg5zx8pe1z 5 ай бұрын

Very good Congratulations

@osamafarhoud12 4 ай бұрын

ممتاز

@ihaspudding 11 ай бұрын

How long do you wait for it to cook between passes??

@X3MTIG 11 ай бұрын

If you meant to cooldown between passes, until it drops 300 F

@ihaspudding 11 ай бұрын

@@X3MTIG exactly what I meant thank you

@JohnPaul-gg8tj 5 ай бұрын

U are a good welder 👍🏻👍🏻

@steelworkers78 11 ай бұрын

Amazing tutorial welding tricks 👍 👍👍 for pipe welding with argon, keep strong bro

@X3MTIG 11 ай бұрын

Thanks 👍

@pk20248 5 ай бұрын

Good job bro

@verajagodics2414 8 ай бұрын

Szuper

@michaelwillis6520 5 ай бұрын

beautifull work sir very impressive .

@X3MTIG 5 ай бұрын

Thank you! Cheers!

@user-pp3nf1td7o 11 ай бұрын

🔥👍

@Quiwi707 10 ай бұрын

3 stop at the same place ?.. 🤔 Great soudures 👍

@user-zp1ms4ux8o 3 ай бұрын

Nice👍👍👍👍👍

@liamjenkins82 11 ай бұрын

Another quality video. Love your work. I wish I could get myself into the pipe game.

@tribhuwanyadav194 8 ай бұрын

Very good sir ji 👍❤

@steveodaily4520 11 ай бұрын

First

@ANDY-we7mr 8 ай бұрын

cracking job mate i always struggle on the cap it goes flat but my friend said try walking the cup its not hard any advice

@frank-696 8 ай бұрын

Thats alotta grinda there superman

@LouisianaSpey 2 ай бұрын

What causes swirling on tie in? As i get ready, close the bead, im getting a swirling action, my purge is turned down and im welding alloy 20. Schedule 80 on 3"

@X3MTIG 2 ай бұрын

This may happen when the shielding gas flow is not adequate or when the gas is blown away due to excessive flow. It's essential to ensure the proper gas flow rate, typically 15 to 20 cubic feet per hour (cfh) for most applications, and to check for leaks in fittings and hoses. Contamination can also occur if the gas cylinder is contaminated with moisture.

@ahmedsyria5630 9 ай бұрын

Good look for you ...bravoo👍😎🚬

@nicowiechmann9584 9 ай бұрын

Echt geile Nähte😎👍

@dejanstarcevic3006 11 ай бұрын

If I can ask you, I am new at welding and i amstill learning. Just got my first welding machine with a torch that I have to trigger on a gumb to start welding, how you start welding eith thst tourch😅

@X3MTIG 11 ай бұрын

HF ili High Frequency, prislonis blizu materijala i stisnes trigger da uspostavis arc… dalje ces morat sam otkrivat 😉

@totalpkg6912 11 ай бұрын

fab

@JohnBrennan-pt9kg Ай бұрын

How would that material weld out using a shield gas of Argon + 2 1/2% Hydrogen to help remove oxides from the pool and to make it more fluid

@ktmturbo5836 5 ай бұрын

Do you always grind Your stop after the coverpass?

@X3MTIG 5 ай бұрын

Depends on material and equipment I’m using

@alone_arjun 2 ай бұрын

Please current and voltage 🙏

@marciocostacosta9277 8 ай бұрын

O que fazer para ser um bom soldador, uma vez que começarei a fazer o curso agora?

@X3MTIG 8 ай бұрын

Patience and lots of practice!

@calboifresh 25 күн бұрын

having issues with the bottom root, if i have the filler rod inside the pipe on the bottom i get a couple bumps on the root, if i go more amps it gets worse if i go less amps like 70 there less bumps but it feels way to cold

@NeonShillo 10 ай бұрын

Why are you grind finish of the cap pass? To avoid craters?

@verajagodics2414 8 ай бұрын

👍👍👍👍👍

@adilsonrodrigues4316 11 ай бұрын

SHOW,PARABENS. PASSA O CONTATO PRA MIM COMPRA UMA TOCHA TIG QUE VOCE USOU PRA FAZER ESSA SOLDA. OBRIGAGO.

@X3MTIG 11 ай бұрын

heavyhitterstigrigs.com

@pavelstoikov3780 8 ай бұрын

i am not on Welding side i am not gonna be but ty so much u get on metrics side to get it, sub on ur channel ! its realy interesting to se it on green screen how its Welding

@user-zf4xt5cn1m 10 ай бұрын

👍👍👍👍👍👍👍

@jamyesmith8205 3 ай бұрын

How can you do MT on stainless steel. I like to know.

@Andrea-dr2lt 9 ай бұрын

Wow do you use also mig not for penetration but for the filling?

@X3MTIG 9 ай бұрын

No, no mig in the field, in the shop they use flux core for fill and cap.

@mikehoncho5389 8 ай бұрын

How do they do a MT on the root?

@eplet89 11 ай бұрын

Hey man great video! just question, are you sure its 30lpm purge? sounds like alot for such a "small" pipe its not cfh? if its cfh it would be equal to 15lpm

@X3MTIG 11 ай бұрын

30 lpm

@livepost6986 11 ай бұрын

*@eplet89 Unless I am missing something I think he did in fact set the purge at 14.16 lpm (to be precise) which would be equivalent to 30 cfh. It appears these flow meters are in cfh. When you look at the top of the flow meter it shows the letters SCFH which stands for Standard Cubic Feet Per hour. There appears to be only one purge hose inserted into the pipe. If there were two then yes it would then be closer to 30 lpm.*

@luciusirving5926 7 ай бұрын

If it weren't for super strong gravity, then maybe those vertical welds would have looked prettier.

@zahidansari2401 7 ай бұрын

Hello hii

@sapient74 8 ай бұрын

Damn

@livepost6986 11 ай бұрын

*Another great video as always. You stated you set the back purge at 30 LPM. However, when you look at the top of the flow meter it has the letters SCFH (standard cubic feet per hour). 30 CFH is equivalent to 14.16 LPM. If you were to use two hoses for the back purge with each set at 30 CFH then yes you would then be closer to 30 LPM but It appears that you are using only one hose. Just an observation. Please forgive me if I am missing something.*