XClutch Twin Disc Clutch Install on my 750HP BMW 135i! Stalled It Instantly... *FACEPALM*

XClutch Twin Disc Clutch Install on my 750HP BMW 135i! Stalled It Instantly... FACEPALM

Рет қаралды 14,340

5 жыл бұрын

My Spec Stage 3+ clutch started to slip after only 5k miles, so it was time for something even better. I decided to go with the XClutch twin disc (ceramic option), it grabs great so far! See below for more information & full modification list...
- XClutch Twin Disc (for 2007-2008) bit.ly/xclutch-8-bolt
- XClutch Twin Disc (for 2009+) bit.ly/xclutch-6-bolt
- RTD Shifter: bit.ly/2vIKzm3
- Clutch Pedal Stop: bit.ly/2Vcjkec
- T60 Torx: bit.ly/2JnKOfe
Things to replace while you're in there:
- Upgraded Clutch Delay Valve: bit.ly/2LudXYd
- Royal Purple Trans Fluid: amzn.to/2E6O6PK
- Poly Trans Mounts: bit.ly/2sOXEJH
- Brass Clutch Fork Pivot Pin: bit.ly/2VHh1EJ
- Bellhousing Bolts: bit.ly/2Ht7mYL
- Downpipe Gaskets: bit.ly/2w83I0R
- Rear Main Seal: bit.ly/2VIgzGi
-------
📷 Instagram: / jakespence
🏁 My BMW merchandise: bimmerstreet.com
🌟 Become a Patron: / jake_spence
💰 Donate to the channel: bit.ly/2HhSDAZ
-------
⚠ 2008 BMW 135i (752whp/691wtq) ⚠
Complete Build Log: my1series.com
PERFORMANCE
- Doc Race 6266 Single Turbo Kit: bit.ly/302yZjz
- Doc Race Intake Manifold & PI Kit: bit.ly/2PO3CEI
- Doc Race 3" Charge Pipe: bit.ly/2VjciZQ
- TiAL Q Blow Off Valve: amzn.to/2HdILpt
- VRSF 7.5" Race Intercooler: bit.ly/2vLjvm8
- PR Ignition Kit: bit.ly/2VUn1cy
- PR Stage 3+ Fuel Pumps: bit.ly/2H6m3k7
- BMP Port Injection Kit (for OEM intake): bit.ly/2MQJDUs
- Charge Pipe & BOV (for OEM intake): bit.ly/2DVzrHo
- BMS PCV: amzn.to/2H4moF8
- NGK 97506 Spark Plugs": bit.ly/2TvoDVQ
ACCESSORIES
- BMS Cowl Filters: bit.ly/2l4082g
- BMS Oil Catch Can: bit.ly/2HTxsaJ
- Billet Oil Filter Cap: bit.ly/2nDj1KW
- 3.5 Bar TMAP Sensor Kit: bit.ly/2ZZIrVb
TUNING
- JB4 Tuner: bit.ly/2t8Hevi
- JB4 Bluetooth Connect Kit: bit.ly/2DXGOOH
- JB4 Port Injection Controller: bit.ly/2XGIaFh
- JB4 NLS/2-Step Relay: bit.ly/2ZZIrVb
- Free JB4+MHD Flashes: bit.ly/2V79udi
- MHD Flashing Cable: amzn.to/2qGKbl2
- OTG USB Adapter: amzn.to/2qKvc9R
TRANSMISSION (MANUAL)
- SPEC Stage 3+ Clutch: bit.ly/2JsSehU
- Single Mass Flywheel: bit.ly/2JtLtfN
- Race Trans Mounts: bit.ly/2sOXEJH
- RTD Short Shifter: bit.ly/2vIKzm3
- Teflon Shifter Bushings (OEM Shifter): bit.ly/2V99OZc
- Upgraded Clutch Delay Valve: bit.ly/2LudXYd
- Clutch Pedal Stop: bit.ly/2Vcjkec
- Royal Purple Trans Fluid (2 qts): amzn.to/2VqSLqF
- Redline 75W90 Diff Fluid (2 qts): amzn.to/2J6pPt7
WHEELS/SUSPENSION/BRAKES
- Eibach Pro-Kit Lowering Springs: bit.ly/2HFyfqm
- APEX ARC-8 18" Wheels (Anthracite): bit.ly/2LJxkrx
- 10mm Spacers (Rear): bit.ly/2LGPaLC
- Wheel Stud Conversion Kit: bit.ly/2zPJ7mW
- StopTech Brake Kit: amzn.to/2qKFWVA
EXTERIOR
- LUX LED Angel Eyes: amzn.to/2HKIDPi
- Gloss Black Front Grilles: bit.ly/2VlvRk9
- Black BMW Roundel Overlay Kit: bit.ly/2sZHpsv
- BMW Black Line Tail Lights: bit.ly/2y1dhCO
- BMW Performance Trunk Spoiler: amzn.to/2rA6byr
- Rieger Rear Diffuser: bit.ly/301Oqsp
- Front Splitter: bit.ly/2H8qzjl
- Splitter Support Rods: amzn.to/2VNCTh7
- Sideskirt Splitters: bit.ly/2vGdAyW
- Smoked LED Side Markers: amzn.to/2Lw5h3l
- LED License Plate Lights: amzn.to/2Hainkd
INTERIOR
- NRW Steering Wheel: bit.ly/2PQugwR
- BMW Performance Shifter Boot: bit.ly/2J5idLJ
- 1M Floor Mats: bit.ly/2JKDYjK
- LED Interior Kit: bit.ly/2JsL79c
- ZHP Shift Knob (for OEM Shifter): bit.ly/2TAaozh
🔧 TOOLS I LOVE
- Dragy Performance Meter: amzn.to/2J4DILx
- BMW Wheel-Saver Socket: amzn.to/2JmOAVq
- BMW Jack Pad Adapter: bit.ly/2V7F7mX
- BMW Magnetic Spark Plug Socket: amzn.to/2VQGaw6
- Spark Plug Feeler Gauge: amzn.to/2HJoLfn
- 200-Piece Tool Kit: amzn.to/2zZlsRd
- Low-Pro Jack: amzn.to/2vq1g8F
📸 MY EQUIPMENT
- Vlogging Camera: amzn.to/2H7Ggax
- Wide Angle Lens: amzn.to/2Uo7pyn
- Canon 50mm Lens: amzn.to/2YVFdkS
- RODE Microphone: amzn.to/2ViStSq
- Camera Stabilizer: amzn.to/2D5N5Hg
- LED Camera Light: amzn.to/2H6SgJp
- DSLR Suction Mount: amzn.to/2Kkwrd3
- GoPro HERO7 BLACK: amzn.to/2Job7RE
- GoPro Suction Mount: amzn.to/2vLdq9m
- DJI Mavic Pro Drone: amzn.to/2H76iur
- Editing PC (it's a POWERHOUSE!): amzn.to/2V29ds8
#SingleTurbo #N54 #6MT
This description contains affiliate links. If you purchase anything using the product links above, I will earn a small commission at no extra cost to you. Win-win!

Пікірлер: 116

@jake_spence 5 жыл бұрын

*I forgot to mention my previous clutch (Spec Stage 3+) started to slip at high power levels with only 5k miles on it.* I was really disappointed because I thought the Spec clutch would handle the power, but it was only rated for 671 tq. This new XClutch is rated for double that, so I don't think I'll have an issue!

@maciejf2032 5 жыл бұрын

Did you do anything to the gearbox in terms of durability? I got just 645 Nm of torque on MHD 2+ and the g-box oil after around 1500 miles was black... No shifting problems or anything but it worries me. I got a single mass flywheel with twin disc clutch and I fixed the idle rev g-box rattle by increasing the revs and putting a mix of Redline 75W140 and D4 ATF but I get a rattle when accelerating on high gears at below 3000 rpm.

@jake_spence 5 жыл бұрын

No, I just changed the fluid with the Royal Purple stuff. I'm not sure of any upgrades for these transmissions. I have the poly trans mounts and RTD shifter, but that isn't necessarily a durability upgrade.

@terryellis333 4 жыл бұрын

I’m in the same boat -stage 3+ is now slipping :( the reason you think that is because I was told by Soec today that their ratings of torque are at the flywheel... not the wheel.

@arikara 5 жыл бұрын

This channel is gonna blow up soon I swear man, keep up the grind 🙌🏽

@jake_spence 5 жыл бұрын

I'm gonna keep hustlin', lots of good content coming soon... thank you for the support!

@VehicleVirals 5 жыл бұрын

The scenery you chose for the photoshoot was spot on! 👌🏼 Here in Orlando it's tough finding a good spot for photos.

@jake_spence 5 жыл бұрын

Thanks man! Plenty of rural area around here to get photos, but the weather is only nice for a few months lol.

@Teraprinny 4 жыл бұрын

Just installed the organic version on my Genesis Coupe, dude. Same metallic sound and jumpy start like you mentioned but definitely drivable! Thanks for the upload!

@jake_spence 4 жыл бұрын

Nice! Glad to hear you're happy with it!

@sneakerandthedryer 5 жыл бұрын

Good vid as always Jake!

@jake_spence 5 жыл бұрын

Thanks!

@lightmanek 5 жыл бұрын

Great video Jake! Your new clutch is definitely more noisy than the one I'm running. I went with organic discs but stronger Sasch pressure plate. I can pull off gently if I have to, but when I just dump it, wheels just spin or engine stops! I did increase idle revs to 850RPM and that cured 90% of chatter when stationary. I daily my car and today I spent 4h in slow traffic in London. My left leg feels a bit worn out ;) Twice the clutch pressure but my organic plates will hold 1400Nm so it's worth it! PS. I've done over 5000 miles on mine already and no problems and no slipping. PS.

@jake_spence 5 жыл бұрын

Awesome! Sounds like a great setup then. Less noise and no slipping, seems like a win-win in my book!

@jasonroed1382 4 жыл бұрын

That noise is just how twin disc set ups sound from my experience not the throw out bearing. When the clutch is depressed and the discs and plate in between them aren't clamped together anymore and they rattle around causing that noise. Nothing you can do about it unfortunately. When you wanna start making big power everything gets louder, not just the engine lol

@christophercaruso448 5 жыл бұрын

Much better audio. Great video Jake.

@jake_spence 5 жыл бұрын

Thanks, I'm glad this setup was better!

@jacobhomstead9036 Жыл бұрын

Did you need to upgrade your flywheel to single mass for the 335is clutch? Love the content by the way, definitely one of my favorite channels/resources.

@brandonhenery1831 5 жыл бұрын

'When you drop the 10mm socket' - priceless.

@jake_spence 5 жыл бұрын

Haha, I figured I should include it.

@motorseries416 5 жыл бұрын

Funny I'm swapping out my transmission too. Nice clutch choice! I'm running the motiv twin disc, and it was definitely like relearning how to drive stick.

@jake_spence 5 жыл бұрын

Swapping it out to improve the 1-2 shift? And yeah, I'm finally getting used to it but it's a lot different than the other clutches I've had in this car.

@thepseudomasterchef7238 7 ай бұрын

I put this same Xclutch setup in my subaru after getting about 60k miles out of my ACT, It lasted long enough considering I drive my car, and did more than a few launches. Honestly I'm amazed at how streetable this dual disk metallic/ceramic ..Rev matching and shifting gears is so smooth and easy.Even sprung, I was prepared to swap out the ceramic disks to organic if worst to worst. It doesn't shudder/skip when engaging much more than the ACT, plus If I have time to just slowly let off the clutch, it engages and moves with no throttle..I try NOT to slip it, but when its shuddering, its "slipping" technically..On a decent incline its tricky, but I only have 700 miles on it, mostly back roads and hwy so it needs more time as its getting pretty easy to drive now..Bottom line, they make great quality products..Just don't expect ceramic to last as long being a DD..Its really not meant to slip

@neillewis800 5 жыл бұрын

That chatter sound isn't the throw out bearing. It's the centre plate between the clutch discs rattling when you take the pressure off the package. It rattles on the stands that hold it in place and that the pressure plate bolts to.

@jake_spence 5 жыл бұрын

Yeah, I meant that the metallic whirring noise was from the metal throwout bearing.

@australianclutchservices7503 5 жыл бұрын

Hi Jake, Great video and thanks for putting this together to give people some further understanding of how the kits are to drive. We are the parent company of XClutch and just thought we would let you know that the metallic sound that you can hear when the clutch is pressed is actually the intermediate plate moving around rather than the throw out bearing . This is perfectly normal for this style of twin plate as the intermediate plate is floating, so no need to worry about that. Thanks again and if you have any questions about the clutch, feel free to get in contact (sales@xclutchusa.com).

@jake_spence 5 жыл бұрын

Oh, interesting! I was under the assumption it was the throwout bearing after reading posts from "MartyMil" on the forums. So a stock OEM throwout bearing will not solve the metallic whirring noise? I will have to update some of my posts about the clutch. Either way, I am happy with the clutch and the quality exceeded my expectations!

@australianclutchservices7503 5 жыл бұрын

@@jake_spence Hi Jake, No that noise is just the intermediate plate so the throw out bearing will not change this. We would not recommend changing the bearing to anything other than the one that came in the kit. Great to hear you are happy with the clutch and we look forward to following your build. Thanks

@slumygoat 2 жыл бұрын

@@australianclutchservices7503 Does your company make a kit for the Z platforms ? 14’ 370z

@supremius 2 жыл бұрын

I just installed mine on my 2007 335i and it chatters only in neutral whats happening there?

@chadparries5628 5 жыл бұрын

Would definitely be interested to see how you process your pictures and videos, etc. Your photos always have a dramatic feel that I struggle to capture! Also, where are you finding some of your beats for the videos? I use these instrumentals a lot, and love the LAKEY INSPIRED tracks, but wanted to explore some other options.

@jake_spence 5 жыл бұрын

I'll try to get around to a photo editing video at some point! As for the music, I follow a few channels on KZfaq that produce free beats. Otherwise a simple search of "free" or "royalty free" or "no copyright" *insert type of music here* will work. Then a KZfaq to MP3 converter. I'll link some of the channels I follow below. kzfaq.info kzfaq.info kzfaq.info/love/q6xI5SYQUBd69OBINOGu7A kzfaq.info/love/8cPWCTSXzzbvmql7X99XwA

@bryantlaw7918 4 жыл бұрын

Thanks for the video Jake. I recently put a twin disc in my 335i and I was wondering if that grinding noise was normal. It is a whole new driving experience from any other clutch I have felt. I daily mine and I’m used to it now but in the beginning the learning curve was steep!

@jake_spence 4 жыл бұрын

Agreed! Glad to give you some peace of mind. It's definitely a different feel from stock!

@Bitaliktderr 5 жыл бұрын

+1 for video about taking pictures & videos!

@jake_spence 5 жыл бұрын

Thanks, I do my best!

@klipseracer 4 жыл бұрын

@@jake_spence Jake, did you ever do this vid?

@philipwest6478 3 жыл бұрын

What boost levels did the Spec fail you at? I'm going to have a 500HP build. I am looking at the Spec Stage 3 +. Now I got doubts.

@thebatchelors9924 5 жыл бұрын

I’m not a BMW guy more of a GM LSX kind of guy. But love the channel! Look forward to more videos. Definitely need that video processing video.

@jake_spence 5 жыл бұрын

Thanks man! Most of my friends are diehard GM/LSX guys, so I know where you're coming from. I love that platform as well, just don't know as much about it.

@thebatchelors9924 5 жыл бұрын

Jake Spence I get it completely. I really like BMW’s never owned one but I have a LS1 that I took out of my Camaro and I started watching your channel and now I have an itch to buy and build a BMW. Thinking E46 with an LS as a summer daily.

@jake_spence 5 жыл бұрын

Haha, that'd be awesome!

@ToefuClips 5 жыл бұрын

Good video Jake! I was considering the same used gear box swamp for mine. I have a similar notch feeling going in 2nd. Did it make a difference?

@jake_spence 5 жыл бұрын

I haven't slammed it in second yet, waiting til I break in the clutch. But once it's broken in I'm going to slam the 1-2 shift at high power and see if it locks me out.

@monikauivari321 3 жыл бұрын

Could you give me an advice between spec stage 3+ and xtreme twin clutch, i'm more interested at exteme ceramic clutch but first i would like to understand if the ceramic cluth is drivable also in the street, because i use my car both for track day but also on the road (not daily, only in the weekend)

@dfqnexxus3710 2 жыл бұрын

Hey man the listing bell housing bolts on the video description are the only ones that they should replace or all the rest should be replaced as well?

@chesterchong2556 4 жыл бұрын

Hi Jake! wonderful video.. how is this compared to the Spec 3+ with SMFW?

@jake_spence 4 жыл бұрын

Thanks Chester! It's harder to drive but clamps much better. No clutch slip.

@Teraprinny 5 жыл бұрын

Going to install the Organic version on my Genesis Coupe in about 2 weeks. Thanks for the detailed video dude!

@jake_spence 5 жыл бұрын

Nice! Good luck, I hope you like it.

@ottinator130 2 жыл бұрын

Is it possible to drive the original release bearing from BMW? Id like to avoid the whirring noise

@ericsens7961 2 жыл бұрын

Didn’t know that’s what that metal noise is! Just installed my Xclutch, it’s noisy lol

@pennypacker2000 3 жыл бұрын

what was the issue with the shift from 1st to 2nd on the first gearbox?.. I feel like I need to pause the 1st to 2nd shift slightly for it to go smooth....

@eyanschultz9029 5 жыл бұрын

If you haven't already you should make a video of how you did the 2 step and anti lag with the jb4 and messing around with it that would be an easy but good edit.

@jake_spence 5 жыл бұрын

I'll do that in the future!

@alborzmir 2 ай бұрын

Hello Jake I am commenting after 4 years I want to upgrade my 600whp N54 (8 bolt flange) clutch to a triple disc clutch and I want your recommendation on which brand is the best between : pmc rtmg triple disc x clutch spec If you could please guide me that would be great

@duartecigre4190 4 жыл бұрын

Did you have any issues with the slave cylinder, such as being to short to connect to the clutch? Tnks

@karamalshaikh738 2 жыл бұрын

how long did the clutch last? im thinking about getting this and dont plan on pushing big power, i just want longevity and being able to push the car hard with this clutch

@FastEditDemon11 4 жыл бұрын

Hey Jake. Any update on how this is holding up? I am trying to decide on a clutch. I was looking at the spec stage 3+, but not really sold on it. I was also considering the motive twin disk, but if x clutch is a better option I'd like to give it a try if it's reliable. Thanks in advance for the info.

@jake_spence 4 жыл бұрын

It's been holding up great! Tons of high HP hard launches and it grabs hard. No issues at all.

@_Kaurus 3 жыл бұрын

I have the twin disc, organic. I can say that it's very rough starting your car. I went around the neighborhood to practice a few times, and it wasn't enough. current my 335i is a rocking Bronko. Yes, it's a driver skill issue, but at the same time, I've only had manual cars for over 20 years. That's my entire driving life. I was told, "twin disc means less heavy pedal while keeping grip & driveability." I can't imagine anything less dailyable than this product that I've experienced using other than a stage three in a stage 3 Audi TT. I would say that twin disk = some serious racing stuff that likely you'll have a high learning curve to learn. I would akin it to using the brake pedal with your left foot, while it's floating in the air... Anyhow, I'll keep slipping this ting and hope it easy off on the instant grip.

@L0V3I54GUN Жыл бұрын

Personally just finshed installing one on my rb25 240sx a couple hours ago. i had an os giken before than had engagement at the very bottom. This clutch has it at the very top of pedal travel for me. While I only have a couple miles on it as of tonight, I can say the only reason it feels like its more grabby/instant engagement is because i have no muscle memory with it engaging at the top. I think once i adjust my pedal and put a stop in then it'll be just as dailyable as the OS Giken was and that one was a single disk meant for only 350ish ftlbs holding power. Just to give you an idea of my experience, I drive all kinds of manual cars working as a tech and mine has always been the easiest while having a much heavier clutch all because i had that muscle memory on my car and not other one off cars.

@Kipitrl 5 жыл бұрын

Any recommendations for holding more torque inthe 6at transmissions n54? Besides Alpina XHp? Manual swap?

@jake_spence 5 жыл бұрын

XHP would be the first thing I'd do to improve shift speed, I can't wait to do it on my 335i. But to hold more power, Robert @ Precision Raceworks has been in my ear about some upgraded PD parts for the regular 6AT.

@Kipitrl 5 жыл бұрын

@@jake_spence keep us posted on that! Ill shoot him an email thanks!!!

@maxnix346 5 жыл бұрын

Seems like an upgrade to a more heavy duty model of 6HP would be helpful. Of course you have auxiliary ATF cooler installed.

@Kipitrl 5 жыл бұрын

@@maxnix346 yep its the BMS cooler

@samuelmaldonadorios5713 4 жыл бұрын

Did you removed the clutch pedal spring as well? I installed the same dual clutch and I was wonderful if you would get a better feel when engaging without it.

@jake_spence 4 жыл бұрын

No I didn't, but that's an interesting tip.

@samuelmaldonadorios5713 4 жыл бұрын

I end up buying the UCP (Ultimate Clutch Pedal) and feels way better than the oem and I removed the spring as well. You should give it a try

@Ris3nPropheT Жыл бұрын

Bro, this was my biggest concern when I had my stage 1 Xclutch organic, installed. I was losing my mind think the shit ws installed incorrectly or if i had already broken it 😢. But after reading and doing more research, everyone is saying the same thing, including Xclutch representatives. I press in the clutch pedal and I can hear the engagement, in slow accelerations i can also hear shattering or noises coming from inside the clutch. I pray this is correct and nothing wrong, or i am fucked.

@dirtyjedi718 Жыл бұрын

Did you install a pedal stop?.

@erickromero010 5 жыл бұрын

sounds like a race car!

@jake_spence 5 жыл бұрын

Thanks man! (I think)

@jakev3794 3 жыл бұрын

I only make 550whp, and my xclutch twin disc is now slipping after not even 10 thousand miles. I don’t even race. I just drive the car and have an occasion pull. I hope yours lasts longer than mine did. I actually wanted the spec stage 3, I was talked into going with this and I’m disappointed. :(

@KaiForce 3 жыл бұрын

My spec stage 3 never slipped but a few springs fell out after 35k miles and destroyed everything. Probably going ACT this time. I know others who had Specs fail in the same manner under 30k miles.

@xXmoemoneyXx 5 жыл бұрын

How is the clutch holding up? Do you recommend

@jake_spence 5 жыл бұрын

I haven't put very many miles on it since releasing this video. But it's grabbing great, no issues. Stay tuned and watch this summer as I start abusing the car.

@macgyverdroid 5 ай бұрын

why solid disk ? why not sprung disk?

@H4roBMX21 4 жыл бұрын

Why is yours 9" but I just got mine an it was 9.5"

@norcalrey2197 5 жыл бұрын

Why was other clutch slipping? Thought they were rated for more tq. I have spec stage 3 no problems yet..but im not running e85 all time..just 91 and methonal..

@jake_spence 5 жыл бұрын

I forgot to mention it in the video, but it started to slip at high power. Turns out, the Spec Stage 3+ is only rated for 671 tq (at the crank), I'm well past that. Good thing this XClutch is rated for 1300+ tq!

@norcalrey2197 5 жыл бұрын

@@jake_spence if you dont mind me asking how much did clutch cost you?

@jake_spence 5 жыл бұрын

The Xclutch was $1350 shipped to my door. There is a group buy going on right now until Sunday for this pricing if you want one too.

@norcalrey2197 5 жыл бұрын

@@jake_spence this is off subject quick question when running direct port injection am i only supposed to activate it when running e85 and have it turned off for 91 octane and e50 blends? And how would i turn it off when running lower octane..thanks

@docsocko 8 ай бұрын

will there be another group buy soon? @@jake_spence

@joshvquez 5 жыл бұрын

Use the other trans to do a swap on the 335i

@jake_spence 5 жыл бұрын

That's a possibility if the 6AT grenades!

@roberttuckerjr4718 5 жыл бұрын

What is the name if the song you are playing at 2.05?

@jake_spence 5 жыл бұрын

kzfaq.info/get/bejne/l9eKldaor6ynXXk.html

@CromBieBoy013 5 жыл бұрын

Hey Jake are you selling your old clutch and flywheel?

@jake_spence 5 жыл бұрын

I already sold it, sorry!

@CromBieBoy013 5 жыл бұрын

No worries! Thank you!

@mustafehusen8693 5 жыл бұрын

Do they have one for automatics

@jake_spence 5 жыл бұрын

No, these are for manual transmissions only.

@jack3d_king 4 жыл бұрын

Hey jake , Is your clutch slipping yet? Mine started slipping on 4th gear first and than 3rd. It’s my daily car never seen the track. How can this be only ran it about less than 3500k on it. And I’m about at 500 hp.

@jake_spence 4 жыл бұрын

That doesn't seem right, if you have this same clutch. I have not had any slipping issues and I've been very hard on it.

@jack3d_king 4 жыл бұрын

The thing is I’m not hard on it. Hopefully the xclutch ppl can help me out with the warranty.

@x_x9554 4 жыл бұрын

@@jack3d_king Did you get your clutch issue resolved? What was the resolution?

@jack3d_king 4 жыл бұрын

X_ X bought a new clutch twIn disc DKM , I’m loving it so far.

@samlaw4443 2 жыл бұрын

@@jack3d_king how has the dkm been? I’m stuck between getting the dkm or x clutch