XJet Dilution Masterclass

Рет қаралды 1,997

5 ай бұрын

In this video I go over how to properly adjust the strength of what your pulling from your xjet without using those proportioners that come with it and end up getting stuck inside your xjet.
If you want help starting or growing your pressure washing business and want the next 10 customers guaranteed book a call with me below
calendly.com/6figurecleaner/6...

Пікірлер: 21

@xxichikokoxx 7 күн бұрын

question for the 2GPM. if you do 10%/0.8 =12.5% thats not possible right?

@kevinulmer9409 Ай бұрын

I've been using the tips forever and so much easier

@brianfletcher7942 2 ай бұрын

This is a splendid explanation. Well done, sir.

@Rayanytc 2 ай бұрын

Thank you.

@Jerseystrong83 2 ай бұрын

good stuff Bro.. very helpful Thank you👊🏽

@Rayanytc 2 ай бұрын

Thank you

@coolguyant3016 3 ай бұрын

Helpful video🙏

@Rayanytc 3 ай бұрын

Thank you

@mitchward1978 21 күн бұрын

I called xjet, and they confirmed to get the proper dilution you need all parts. So, you would divide by 2.6 not 1.6. Everything else was completely right though

@amadeuswolf4628 2 ай бұрын

thank you god!! bro!! this is what i've been searching for for months!!

@Rayanytc 2 ай бұрын

Glad you enjoyed it bro. Do you run a pressure washing business?

@amadeuswolf4628 2 ай бұрын

@@Rayanytc i'm literally starting one now. Just got equipment.

@Rayanytc 2 ай бұрын

@@amadeuswolf4628 send me a DM on Instagram I’ll help you out with starting and getting customers etc @rayankhanfl

@gerardgmz Ай бұрын

What mixture do you recommend for gas station canopy soft cleaning for my 3.5 GPM pressure washing machine?

@mitchward1978 22 күн бұрын

Why didn't you divide the bleach percentage by the total parts of the mixture?

@mitchward1978 22 күн бұрын

Wouldn't that make your 2% soap mix come out at like .75%

@SunePowerwash Күн бұрын

Buddy needs to retake math...1.6 gallons of H20 + 1 gallon of SH =2.6 gallons of diluted mixture. If you want the concentration of SH you don't take H20 percentage. So it is 1 gallon of SH /2.6 gallons of diluted mixture = roughly 40% of the diluted mixture. Then times 40% x (your concentration of SH you said 10%) 10 = 4% SH gpm with this x jet head open. I you think about your math a 1:1 ration is 50%. (1+1=2 , 1/2= .5 x 100 =50% of diluted mixture ) so you can't get high concentration of SH then 50%x 10% = 5% if your water mix is .5 gallons more then your SH. Hope this helps you guys

@Rayanytc Күн бұрын

I believe you misunderstood what I said in the video. My video stated that in a 1 gallon bottle of 10% pool chlorine, there are 0.1 gallons of SH and 0.9 gallons of water. If we add 1.6 gallon of water like you said above the total water becomes 2.5 gallons. The ratio of SH to TOTAL SOLUTION is 1: 2.6 - This is how you calculate the strength of a solution. You find the ratio of the active chemical to the total liquid in the bucket. That's the "%SH" the solution is. The ratio of SH to Water would be 1:2.5 in your example. This is just the ratio of SH to water. This is not how you calculate the strength of a solution. Why? Let's use a 10% bottle of pool shock. If we followed your math where we calculate the strength of a solution by dividing the amount of SH the amount of water, we get 1/0.9... Which equals 0.111 That would mean the pool companies are lying and they're 10% bottle of SH is actually 11%. To summarize, you find the strength of a solution by taking the volume/amount of active chemicals in it and then dividing by the total volume of the whole solution. You then divide this number by the open proportioner on your Xjet card to get the strength of your solution.