Get parts for your Yamaha Grizzly ball joint replacement: bit.ly/Yamaha-Y...
Check out the Yamaha YFM700 front suspension diagram:
www.partzilla....
Here’s a Yamaha YFM700 front wheel diagram:
www.partzilla....
See how to replace the lower ball joint on your Yamaha Grizzly in this video fro Partzilla.com. If you hear clicking inside the control arm or have a torn boot, it may be time to replace it.
We’re going to need to take the wheel off to start, and then we’ll get to disconnecting the upper and lower control arms. Once that’s done, we can take the hub over to the bench and remove the old ball joint. Yamaha makes a special tool for this, but John will show you how to use a vice and a socket to remove the old ball joint and replace it. Next, we’ll replace the lower ball joint on our Grizzly and then reassemble the suspension and get the wheel back on our ATV.
Want to replace the front brake pads on your Yamaha Grizzly? Here’s how: • How to Change the Fron...
Read how to do this job step by step: www.partzilla....
VIDEO HIGHLIGHTS:
Disconnecting the axle nut - 1:38
Removing the caliper - 2:04
Removing steering arm and upper control arm - 2:25
Disconnecting upper ball joint - 3:10
Disconnecting lower ball joint - 3:40
Removing the old ball joint - 4:25
Installing new ball joint - 5:00
Reassembling suspension - 6:00
Buy Yamaha ATV parts here:
www.partzilla....
Talk to us:
Twitter: / partzilla
Facebook: / partzilla
Instagram: / partzilla
In the video we’re working with a 2007 Yamaha Grizzly YFM700, but you may have similar steps for your Yamaha ATV. If you’re not sure whether these steps apply to your machine, leave a comment and we’ll get back to you.
RELATED CONTENT:
How to change the CV boots on a Yamaha Grizzly:
• Yamaha Grizzly CV Boot...