Yamaha Tenere 700 Pannier Racks Installation by Outback Motortek

Рет қаралды 33,552

4 жыл бұрын

We demonstrate step by step how to install the Outback Motortek pannier racks for Yamaha Tenere 700. Torque Specs are below! Both English and Spanish comments are featured in the video.
M12 frame bolt (hexagon head): 75Nm/55lb-ft
M8 frame bolts: 30Nm/22lb-ft
M6 bolts: 9.7Nm/
M8 bolts: 23Nm/
Europe: europe.outbackmotortek.com/pr...
USA: usshop.outbackmotortek.com/pr...

Пікірлер: 28

@koongfu00 4 жыл бұрын

Great tutorial, thank you

@civic1400 3 жыл бұрын

Hay un detalle que no es correcto que deberían decolocar un distanciador en el otro tornillo de la estribera si no no queda bien acoplado, un detalle estético y funcional bastante importante

@roberthicks686 4 жыл бұрын

I'm a little confused by the X-Frame version. If I order the X-Frame is it or is it not compatible with the Mosko 35L panniers? One video shows the removal X-Frame brackets while this video shows what appears to be a static mount for the X-Frame. What am I getting when ordering the X-Frame version for the T7 listed for $309 on the USA site and will it work with the Mosko 35L bags?

@robvanburik7095 4 жыл бұрын

Make use use both passanger pegs bolt holes, redesign the mounting plate, just a friendly suggestion!

@Outbackmotortek 3 жыл бұрын

Thanks for the suggestion

@kashp7864 4 жыл бұрын

What hard panniers are compatible with your system?

@ChooseBrian 3 жыл бұрын

So looking at the space between the rack/exhaust I wonder if the Mosko moto pannier mounts will hit the pipe though.

@Outbackmotortek 3 жыл бұрын

No problem with the Mosko pucks. Mosko Moto sells our pannier racks and we have made changes to our racks to better accommodate their Backcountry panniers.

@Johnddigga 4 жыл бұрын

would be neater and stronger if top tube was longer and spacer was shorter and same as oem diameter. Other than that look good just needs red powdercoat to match the crash bars!

@alrightdave6135 4 жыл бұрын

Will you do an option to off set the left side to make it closer to the bike? Looks very wide and with panniers will be very very wide. Thanks

@Outbackmotortek 4 жыл бұрын

We'll consider. The right side will still be very wide though. Yamaha didn't consider this when they routed the exhaust pipe..

@alrightdave6135 4 жыл бұрын

@@Outbackmotortek Yes, it's definitely fashion over form.

@jasonspollen8998 4 жыл бұрын

There's a lot of unused space on the left side. Left rack would look good much closer, so that a large pannier could be used on left and a narrow on the exhaust side to keep width symmetry.

@alrightdave6135 4 жыл бұрын

Jason Spollen exactly...although I was quite shocked how many people screamed that they wanted symmetrical on Facebook...I can’t quite work out why you would want such a huge gap between the frame and the bike...the exhaust side forces a gap and you can put rotopax there

@jasonspollen8998 4 жыл бұрын

@@alrightdave6135 On my Tiger 1200 I've a Givi 37L on exhaust side and 48L on other side. The bike overall width is equal either side, unlike triumph's own version of givi, which uses 37L each side. Looks odd as the luggage sticks out way more on 1 side. I like both symmetry and practicality. Given a choice I'd rack a T7 the same as my Tiger. And fit a full helmet in the 48L side.

@lucky_luke1331 3 жыл бұрын

OutbackMotortrek, It is possible install this motortrek side racks with oryginal yamaha rear rack?

@Outbackmotortek 3 жыл бұрын

Sorry but they’re not compatible

@sarnbradshaw7382 2 жыл бұрын

Are these racks compatible with the Outback Motortek rear rack?

@Outbackmotortek 2 жыл бұрын

Of course. All of our products are compatible with each other

@FScottKennedy 4 жыл бұрын

Will there be a way to use these with sw motech trax panniers?

@Outbackmotortek 3 жыл бұрын

Unfortunately they’re not compatible

@FScottKennedy 3 жыл бұрын

@@Outbackmotortek ok, thanks for the fast reply 👍🏻

@ShafterRod 3 жыл бұрын

Hey guys, I have a stock yamaha rack that I want to use with this pannier system. What’s the length of those spacers?

@Outbackmotortek 3 жыл бұрын

The OEM Yamaha rear rack is not compatible with our pannier racks.

@ShafterRod 3 жыл бұрын

@@Outbackmotortek have you tried to mount them together? What’s the length of the spacers in the vid?

@l8i6lrut 2 жыл бұрын

Видео хорошее, но видно, что вы не профессионалы, совершили много ошибок. Лайк всеравно)

@nickcolman79 4 жыл бұрын

Video is fake, 10mm socket isn't missing from socket set. :-)

@scolarichris 4 жыл бұрын

The racks don’t have a very elegant design.