Рет қаралды 2,831
After dismantling the John Deere 1445 engine it was clear to me that this little 3-cylinder engine needed some love and a few parts! Luckily I found a supplier that had exactly what I needed.
🔽FridayParts Engine Rebuild Kit🔽
bit.ly/3HRy5Pq
With this engine rebuild kit, I will be able to send the cylinder head and engine block off to the machine shop. They will go through the head and make sure it receives brand new valve guides, valve seats and it will be decked.
The engine block head gasket surface will be machined and then the machine shop will install sleeves into each bore. Once three sleeves have been installed, they will bore them out once more to accomodate the original size pistons.
Once this procedure is done, I can pick up all the parts and look forward to an engine assembly!
If this video was helpful in any way, I'd appreciate it if you hit that like button and if you want to be one of the first to see the assembly video, be sure to subscribe!
🔽Grab Some T-Shirts or Hoodies🔽
workshop-rebuild.creator-spri...
⬇️Follow Me Here Aswell⬇️
/ workshoprebuild
www.tiktok.com/@workshoprebui...
________________________________________________________________________
_
This engine came out of a John Deere 1445 Series II and is very similar to a John Deere 1435, John Deere 1435 Series II, John Deere 1445, John Deere 1550, John Deere 1570, John Deere 1575, John Deere 1580, John Deere 1585
Yanmar 3TNV82A, Yanmar 3TNV82A-B, Yanmar 3TNV84, Yanmar 3TNV84T, Yanmar 3TNV84T-B, Yanmar 3TNV88, Yanmar 3TNV88-B, Yanmar 3TNV88-U
Watch My Previous Rebuilds:
𝐁𝐌𝐖 𝐑𝟔𝟎/𝟓 𝐌𝐨𝐭𝐨𝐫𝐜𝐲𝐜𝐥𝐞 𝐏𝐫𝐨𝐣𝐞𝐜𝐭: bit.ly/3uJVXOn
𝐉𝐨𝐡𝐧 𝐃𝐞𝐞𝐫𝐞 4𝟎𝟎: bit.ly/3unVNfg
𝐉𝐨𝐡𝐧 𝐃𝐞𝐞𝐫𝐞 𝟑𝟎𝟎:bit.ly/3BbuWDz
𝐉𝐨𝐡𝐧 𝐃𝐞𝐞𝐫𝐞 𝟑𝟏𝟕:bit.ly/3wHy2x5
𝗕𝗼𝗹𝗲𝗻𝘀 𝗛𝗧𝟮𝟬 𝗣𝗿𝗼𝗷𝗲𝗰𝘁: bit.ly/2NOLvlp
𝗔𝗹𝗹𝗶𝘀 𝗖𝗵𝗮𝗹𝗺𝗲𝗿𝘀 𝐂/𝐁 𝗧𝗿𝗮𝗰𝘁𝗼𝗿: bit.ly/3bvXLzd
𝗧𝗵𝗼𝗺𝗮𝘀 𝗛𝗟𝟭𝟳𝟯 𝗦𝗸𝗶𝗱 𝗦𝘁𝗲𝗲𝗿: bit.ly/3pDTBKM
𝗝𝗼𝗵𝗻 𝗗𝗲𝗲𝗿𝗲 𝟔𝟖/𝟕𝟎 𝗣𝗿𝗼𝗷𝗲𝗰𝘁: bit.ly/3bKGra3
𝐁𝐨𝐛𝐜𝐚𝐭 𝟕𝟓𝟑 𝐏𝐫𝐨𝐣𝐞𝐜𝐭: bit.ly/37EDeaD
E-Mail: Workshoprebuild@gmail.com
Music: share.epidemicsound.com/v6woxm
#enginerebuild #yanmar
Timestamps: