Yfz 450r Rebuild and Indoor Riding
Рет қаралды 6,795
2 жыл бұрынThe 2022 fmx build!
Performance.
Rp Exhaust. Fci Intake. Different exhaust and intake cams. Vortex tuned by Nick Allen.
Suspension.
Custom set up motowoz for fmx.
Hard parts.
Rath nerf bars and Rath +1+1 stem
Pro Taper Atv High Bars.
BVC Subframe Braces.
Alba wheels.
15/36 gearing.
(Can hit ramp in 2nd with this gearing.)
SSI Graphics done by John Langaas.
@NoahClooten 2 жыл бұрын
Great video man!! 👌🤘🔥🤘🤘🤘🤘🤘🤘
@nickrogers1329 2 жыл бұрын
Thank you!
@thenixonklan6308 Жыл бұрын
Beautiful build!!! I have a 700R! We can’t have 450 in Cali anymore!! Wanting to build my 700R with a 450R feel!
@nickrogers1329 Жыл бұрын
Suspension with a little bit lower ride hight will make it feel more like a 450 for sure
@sbz666_ 7 ай бұрын
Wait is this true? Which CA regulation prevents YFZs from being sold? Or is just this a "hurr durr Commiefornia bad" comment?
@klier 2 жыл бұрын
If you ever became a professional wrestler, you'd be called the "Sprocket Slayer"
@ononewheel7 Жыл бұрын
Aluminum rear sprockets? Grab a Glann innovations case saver and chain slide if you end up snapping a chain again it wont get all bunched up between the sprocket/swinger it will also protect the cases.
@nickrogers1329 Жыл бұрын
I run a 36t tear for fmx. I’ll get a Glann ordered right away.
@ononewheel7 Жыл бұрын
@@nickrogers1329 ya the gearing i get were those ruined ones aluminum or steel? I race xc while i do run a sprocket guard with all the years of racing and rocks I’ve ridden over never seen that happen with steel 😬 A dual sprocket guard might be a wise investment for ya 😎
@nickrogers1329 Жыл бұрын
@@ononewheel7 I’ve ran both. Had a renthal one literally shatter….and a cheap aluminum one ended up turning into a square
@ononewheel7 Жыл бұрын
@@nickrogers1329 ya with atv’s and the weight i feel steel is the only option. I have been running sunstar for years with great luck.
@infi-nity8638 Жыл бұрын
Where did you get the seat Ive been looking for one that has cheeckers. Nice build man
@nickrogers1329 Жыл бұрын
Thrill Seekers cover
@SQUARE1SpeedChannel 2 жыл бұрын
How does one "square" a sprocket? That's the first time I've ever seen that. 😆
@nickrogers1329 2 жыл бұрын
Must of landed on a rock otherwise no idea!!
@infi-nity8638 Жыл бұрын
And is there a website to get that graphic kit?
@nickrogers1329 Жыл бұрын
SSI Decals
@jguetter69 2 жыл бұрын
You should ride professional motor cross.
@nickrogers1329 2 жыл бұрын
Geometry is all wrong. Needs to be slammed and bottom out off everything.
@ricardoyfz450r Жыл бұрын
What do you say about the exhaust? I have a Fatboy4 and the same transmission 15x36
@nickrogers1329 Жыл бұрын
Just switched to rossier and I highly recommend it. I’ll be posting a video soon.
@ricardoyfz450r Жыл бұрын
@@nickrogers1329 i saw a video with a dyno, RP and Rossier had more less same results, wich improve you notice changing?
@ricardoyfz450r Жыл бұрын
@@nickrogers1329 i had achieve a Doma, and in top end speed it results, but its not so explosive in the beggining
@nickrogers1329 Жыл бұрын
@@ricardoyfz450r rossier has more low end
@LSpindenIII 2 жыл бұрын
Call me when you want a real quad build! I would do way better than that guy!
@nickrogers1329 2 жыл бұрын
😂😂😂
Limitless Powersports
Рет қаралды 12 М.
ononewheel7
Рет қаралды 4,9 М.