You’ll Never Weld Pipes The Boring Way Again | Metalworking Project

  Рет қаралды 3,859,362

Totally Handy

Totally Handy

Жыл бұрын

Explore a wide variety of content in our carefully curated KZfaq playlist: • Binge-Worthy Content
If you’re enjoying this video, check out our other projects! Subscribe to our channel for woodturning, metalworking, restorations, remakes, epoxy resin projects and more. You name it, we do it!
Subscribe to our channel → / totallyhandy
Check our Shorts channel → / totallyhandyshorts
#totallyhandy

Пікірлер: 584
@TotallyHandy
@TotallyHandy Жыл бұрын
✨✨✨ Check out our other video HERE: kzfaq.info/get/bejne/m8x8ZqRlxJ65eoE.html
@RichardCranium321
@RichardCranium321 Жыл бұрын
@@constantin7198 that wasn't "welding"..... that was just a few tacks - of which none penetrated the base metal and as a result, these joints *will* fail.... The video is just over 8 minutes long, so luckily the welds only need to last about 9.
@binojkanadi
@binojkanadi Жыл бұрын
🙏
@areyoukidn28
@areyoukidn28 Жыл бұрын
Tack welds on a butt joint = zero penetration. And then ground off completely flat. Lol the only thing holding that together is the black paint! 👍
@gerryatrick
@gerryatrick Жыл бұрын
Would be interested in seeing your video with how it should be done. Please put one up for us all to see.
@joshhuskins5363
@joshhuskins5363 Жыл бұрын
@@gerryatrick He is absolutely right. I've been welding for 30 years I don't need a welding channel or video to tell you that I could take those pieces and smack them against a table and bust the joints.
@Padenjs
@Padenjs Жыл бұрын
I have never welded a thing in my life and I was immediately suspicious that those tiny spot welds that are almost completely ground off are going to be useless structurally. Glad there are some welders to call it out in the comments when I looked.
@JL-wg4ss
@JL-wg4ss Жыл бұрын
What is the proper way to might weld
@JesseG085
@JesseG085 Жыл бұрын
Check out 3:44 after the first passes with the grinder.
@mikek1187
@mikek1187 Жыл бұрын
Clever way of cutting metal to make bends, but if you want any strength in your welds, you need to grind a valley channel into the weld points. Then, with the welder, fill the valleys with weld, making sure the welder is set to proper amperage and voltage for gauge of metal you’re working with. What you’re doing is making superficial surface tack welds, then grinding them down, leaving behind next to nothing. These would be fine for cheap IKEA desks, but I wouldn’t use these for anything heavy! Still liking the video simply for showing the cutting techniques.
@larrygooch6233
@larrygooch6233 5 ай бұрын
I'm sure this guy knew that the welds would not hold up a train ingine.he was just sharing his knowledge of how to make corners for people that haven't been doing it for years or don't have a 3 d imagination.
@Keyboard-Emperor
@Keyboard-Emperor Ай бұрын
​@@larrygooch6233 there are people that can't imagine 3Dimensions? How would the see a ball in their head? I'm legit asking because I've never heard that before. But it sounds like an interesting topic.
@user-zs8rj9jg4g
@user-zs8rj9jg4g 22 күн бұрын
ただカッティングの為のマーキングは15mm毎スケールを動かしてマーキングすると必ずズレが生じます。 職人達は通常15mm30mm45mm60mmと15mmを加算した数値でマーキングします。
@darrylchase3688
@darrylchase3688 Жыл бұрын
Entertaining. It should come with a disclaimer that those spot welds on the tubes are not suitable for metalwork requiring strength due to low penetration.
@syedsafeerhussain5289
@syedsafeerhussain5289 Жыл бұрын
Were these people 0
@darrylchase3688
@darrylchase3688 Жыл бұрын
@@Talla2XXL Let's hope nobody uses that technique when it matters
@VestigialHead
@VestigialHead Жыл бұрын
You could still use the same initial concept and just weld normally.
@darrylchase3688
@darrylchase3688 Жыл бұрын
@@VestigialHead Or reshoot the video using a welding technique for strong welds.
@JimBillyRayBob
@JimBillyRayBob Жыл бұрын
The welds themselves are garbage
@redi4871
@redi4871 Жыл бұрын
Love the way he always moves the ruler to measure 1.5cm instead of just putting a mark at 1.5 and 3 and 4.5cm lol
@josanjosan
@josanjosan Жыл бұрын
Compounding errors👍
@replynotificationsoff
@replynotificationsoff 3 ай бұрын
blade width?
@scottvidgen1878
@scottvidgen1878 Жыл бұрын
"a grinder and paint...makes me the welder i ain't"
@ernestmurphy3898
@ernestmurphy3898 Жыл бұрын
A cold welded trailer tongue will soon train a painter-grinder about lack of fusion.
@JesusTorres-xz5jt
@JesusTorres-xz5jt Жыл бұрын
Exactly....
@ShootAUT
@ShootAUT Жыл бұрын
When you wanted welding lessons, but your parents got you a laptop and editing software.
@unsolicitedditkapics9722
@unsolicitedditkapics9722 Жыл бұрын
I try not to be a jerk about people being creative but I have no idea what "unboring" technique he was using. Spot welding? Lol
@jadedclone6728
@jadedclone6728 Жыл бұрын
@@unsolicitedditkapics9722 I'm still looking for the pipe in the video
@vinnyrodriguez2699
@vinnyrodriguez2699 Жыл бұрын
I watch these videos to learn from both the video itself and also the many many comments. Always appreciate the useful stuff and also learn from the mistakes. Thanks to everyone both the video maker and the people who commented.
@ChuckHickl
@ChuckHickl Жыл бұрын
Plenty of legit welders to learn from on YT but all this video is teaching is creative editing and has nothing to do with actual welding to bond pieces of metal together.
@paulgannon3261
@paulgannon3261 Жыл бұрын
What I do like is how accurate the cutting is with the grinder. No fluctuation of the marked line.
@PlanX00X
@PlanX00X Жыл бұрын
You need glasses
@paulgannon3261
@paulgannon3261 Жыл бұрын
@@PlanX00X you need to see sarcasm. Maybe you need glasses
@fleetsiderebel8274
@fleetsiderebel8274 Жыл бұрын
For the love of God JUST RUN A BEAD!! These spot welders will drive ya nuts!
@djtblizzle
@djtblizzle Жыл бұрын
To all the naysayers, use the geometric patterns and make the proper welds. I believe that’s the point of the video anyway…not how structurally sound the end product is. Personally I think the patterns used for the fabrication is awesome.
@scottyphillips7799
@scottyphillips7799 Жыл бұрын
I do agree with ya on the aesthetic but the strength is a different story.
@mjolnirswrath23
@mjolnirswrath23 Жыл бұрын
@@scottyphillips7799 add metal to inside of pipe...tack and enclose THEN weld properly and grind
@armstronglaborde
@armstronglaborde 5 ай бұрын
I agree 👍 with you; there is so much I learned from this video; especially in forming those bends.
@user-ug4zn2ry2v
@user-ug4zn2ry2v 5 ай бұрын
Cutting is not fabrication
@user-ug4zn2ry2v
@user-ug4zn2ry2v 5 ай бұрын
​@@armstronglabordethe bends are just geometry did you sleep through that class in school
@MrBigspendn
@MrBigspendn Жыл бұрын
I've been in factory work for almost 30 years now and knew tons of welders, sheet metal, and machinists journeymen over the years while I was setting tools and dies. I should have taken welding up. I had plenty of guys that would have trained me and I love it.
@nevinkuser9892
@nevinkuser9892 5 ай бұрын
Why not start now?!
@abdulrahmonsesan3829
@abdulrahmonsesan3829 Жыл бұрын
Wonderful cutting, grinding and painting tutorial ✌️
@DigitalGus75
@DigitalGus75 Жыл бұрын
Wonderful grinding and painting tutorial!
@WWG1-WGA
@WWG1-WGA Жыл бұрын
😂😂😂😂😂😂
@penttijakonen3817
@penttijakonen3817 Жыл бұрын
It wasn't a tutorial on welding, in case you didn't know. 🤦
@Eloquent_Chaos
@Eloquent_Chaos Жыл бұрын
The grinder covers up bad welds and the paint covers grinding marks
@sethw9979
@sethw9979 Жыл бұрын
e.g. @3:56 the grinding revealed a complete lack of joining along one of the "welds". "A grinder and paint make me the welder I ain't."
@charlesmcnew1051
@charlesmcnew1051 Жыл бұрын
Haters
@moonlambo5229
@moonlambo5229 11 ай бұрын
Some epic video editing and camera work here. This video must have taken many hours to make.
@jazzflute2465
@jazzflute2465 Жыл бұрын
Not one pipe was hurt during the making of this video. Still nice to watch.
@SpeakerMunkey
@SpeakerMunkey Жыл бұрын
Good luck getting those joints to pass any kind of certification!
@klue507
@klue507 2 ай бұрын
Nothing he is doing requires a certification. It’s not a structural weld, it’s not a pipe weld that has leak or pressure requirements. It’s far simpler than that. Go back to the welding booth and quit acting like you know about welding code applications, or procedures.
@Eagle_SFM
@Eagle_SFM 11 ай бұрын
Structural integrity has left the chat
@klue507
@klue507 2 ай бұрын
Structural integrity was never asked to show up to the the chat. The thickness of the tube itself, does not have the strength for structural requirements in the first place. Triggering the weld will fuse that thickness of material no problem. These welds and materials are meant to hold butts, not buildings.
@Jut123
@Jut123 Жыл бұрын
I will still be doing it the boring way thanks!
@sherryobrien2045
@sherryobrien2045 Жыл бұрын
So let's see: grind away the strength of my poor quality weld and throw some paint on it. Got it 👍
@charlieross-BRM
@charlieross-BRM Жыл бұрын
My first job in sales took me to Hobart in London Ontario and when we were done business the guy offered to give me a try at arc welding in their classroom. There I am in my three piece business suit, put down my briefcase, don the visor and pick up a torch to lay a bead. It was wire fed. Later in life I would have liked my own oxy-acetylene setup because for what I wanted to fabricate it is more suitable.
@petewehe9074
@petewehe9074 Жыл бұрын
Great ideas for coat hangers, 👌 Thank you.
@ya55er4008
@ya55er4008 Жыл бұрын
Looks visually impressive but I am not sure about the integrity of the welds
@edgardopalacios2690
@edgardopalacios2690 Жыл бұрын
Lo que dices es totalmente cierto, pero. Las soldaduras que viste creo yo son meramente decorativas en ningún momento las mostraron soportando gran cantidad de peso.
@ronniemontgomery8175
@ronniemontgomery8175 Жыл бұрын
I don't know the 1st thing about welding yet I enjoyed watching this..
@jasonb7878
@jasonb7878 Жыл бұрын
Very precise with that grinder.
@L.M.Delgado
@L.M.Delgado Жыл бұрын
That's very smart. Thanks for the tips.
@cleuderchagas9113
@cleuderchagas9113 Жыл бұрын
SHOW DE BOLA. PARABÉNS
@JoanaQuaye-zo2er
@JoanaQuaye-zo2er 6 ай бұрын
Truly you are the best I have ever seen..I wish to learn
@algoritma241
@algoritma241 Жыл бұрын
Vidonun başında öğrendiklerimden sonra,örnek uzay gemisi bekliyordum.Sadece askı ve raf!.
@pyregazer9210
@pyregazer9210 10 ай бұрын
I weld pipe all day long..everyday and my breaks off the trigger are shorter than this guy's welding runs.
@silentious320
@silentious320 Жыл бұрын
Guys, its the Editing. Im 95% Sure for that wall thickness the welds hold up like they should
@ianrobertson3419
@ianrobertson3419 Жыл бұрын
0:56 you can see the unwelded line. It's a sham.
@Marcianody
@Marcianody Жыл бұрын
thanks, you made my day sir
@michaelschade3381
@michaelschade3381 Жыл бұрын
I love when people square cut and surface weld, then grind off all of the reinforcement so it looks machine finished. Then act like that was all acceptable.
@kannappandharmalingam713
@kannappandharmalingam713 Жыл бұрын
I liked it, appreciate your skill, good work. thanks for your efforts.
@Brian-nt1hh
@Brian-nt1hh Жыл бұрын
Fascinating art
@woodworkingaspirations1720
@woodworkingaspirations1720 Жыл бұрын
Interesting aesthetics.
@user-zm2dr6bb9y
@user-zm2dr6bb9y Жыл бұрын
Класс! Перед тем, как сваривать, края металла профильной трубы лучше забить молотком немного внутрь -при зачистке не будет сниматься большая часть сварного шва, так как он будет почти весь внутри. А так всё класс.
@user-zt3td5ux1s
@user-zt3td5ux1s 8 ай бұрын
Ну обычно такие изделия делаешь в декоративных целях и нагрузку они не испытывают, а забор можно и не чистить вообще или промышленные конструкции или скрытые
@skely4613
@skely4613 Жыл бұрын
"Grinder and paint makes me the welder ain't!" -A very wise man
@boyanlamboo2570
@boyanlamboo2570 6 ай бұрын
Let this man build the roll cage for your Honda Civic!
@klue507
@klue507 2 ай бұрын
Would you build a roll cage with 16 gauge material or less?
@JuanCarlos-ik3ob
@JuanCarlos-ik3ob 7 ай бұрын
Maestro gracias por compartir saludos
@molenz1960
@molenz1960 7 ай бұрын
This guy is much better at cutting metal than he is at welding it.
@nceebee6859
@nceebee6859 Жыл бұрын
If the application is furniture of something like that, what's the problem with the welds? Appreciate the creativity this can stimulate in someone ambitious to try.
@RichardCranium321
@RichardCranium321 Жыл бұрын
The problem with it is eventually someone will sit on it.... sharp metal + garbage welds = massive lawsuits when someone inevitably gets hurt because your product failed. These welds are only meant to last about 8 minutes.... just long enough for the video to finish and for them to get paid for your view.
@yogie4u1
@yogie4u1 Жыл бұрын
I don't know why I'm watching this 😂 but it's pretty impressive
@editwithFz
@editwithFz 6 ай бұрын
Love the quality of your videos 😊
@BigDave71
@BigDave71 Жыл бұрын
I’m not a welder but is magic going to hold that tack welding together? Or is it video editing that will? I don’t think welding is boring. I don’t even find soldering wires boring. Even aluminum brazing is enjoyable.
@DavidOldenburg1
@DavidOldenburg1 Жыл бұрын
Some serious grinding skills!
@Florin_Neagu
@Florin_Neagu Жыл бұрын
This is the basic bro equivalent of makeup/home deco videos.
@expressmaster5266
@expressmaster5266 Жыл бұрын
Очень красивая работа 👁👏
@user-ty1mp9lc8l
@user-ty1mp9lc8l Күн бұрын
Здравствуйте спасибо за очень Хорошое умное Видео МНОГО полезного узнал.
@pacificdune
@pacificdune Жыл бұрын
Nice video editing! Could we see it without the dropped frames though?
@Venu664
@Venu664 Жыл бұрын
He is the real IRON MAN!!!
@jbkim7569
@jbkim7569 7 ай бұрын
I'm impressed not weding but grinding
@EMpizza111
@EMpizza111 Жыл бұрын
I’m going to a meeting tomorrow about welding and painting I have 0% experience on this but I learn very fast.
@boutserk5
@boutserk5 Жыл бұрын
Great job due!
@Acetyl53
@Acetyl53 Жыл бұрын
I will do whatever I want and nothing and no one can stop me. Not even some clickbait title.
@armstronglaborde
@armstronglaborde 5 ай бұрын
After commenting and reading the comments which were critical on the strength of the weld after grinding off, I revisited the video and I found that there were sufficient gap in the joints for the tack welds to penetrate to give stronger joints than I thought; even if the joint is ground to the surface. Like me I invite others to relook at the video.
@titolivio6832
@titolivio6832 Жыл бұрын
Bravissimo!
@abelabebe2529
@abelabebe2529 Жыл бұрын
Really nice work.What type of welding instrument is this?
@weslensulinha
@weslensulinha Жыл бұрын
Top demais 👏🏿🙏🏿👨🏿‍🏭🇧🇷
@J30YLK
@J30YLK 4 ай бұрын
The first 'related video' below this one is "Busting Fake Welds" 😂😂😂
@house9850
@house9850 8 ай бұрын
looks good
@user-ok4qe4rd2c
@user-ok4qe4rd2c 2 ай бұрын
Very impressive~!
@timothyadams2719
@timothyadams2719 Жыл бұрын
When you want something that looks pretty in a short amount of time but don’t care if it breaks…
@DesertOwlForge
@DesertOwlForge Жыл бұрын
Or be accurate.
@penttijakonen3817
@penttijakonen3817 Жыл бұрын
Pretty sure those welds will 100% endure what the pipes itself will. Also the point of this video probably isn't to teach anyone how to weld.
@tommccarron324
@tommccarron324 Жыл бұрын
If you're going to make those light tack welds, at least run a nice hot bead down the inside corner
@richardtemby4358
@richardtemby4358 Жыл бұрын
That’s cute, apply the weld in spot welding method then grind it all off. Spot style mig has little penetration but it looks better on videos, also most arm chair experts struggle to do a continuous mig run. Just sayin!!!
@gerryatrick
@gerryatrick Жыл бұрын
Ok you say this is wrong, as a non weld I would be interested in a video from your not an arm chair expertise on how to do it right, especially the continuous mig welding. Please put up this video then I can show my father in law who is a welding instructor for a technical institution for 30+ years here. He can critique it and me know what he thinks of it.
@ernestmurphy3898
@ernestmurphy3898 Жыл бұрын
This sells you tube videos, your father in law welding instructor is happy his motivated son in law creates cool videos. But he will not go for your welding a hitch coupler on a trailer his daughter is riding in.
@richardtemby4358
@richardtemby4358 Жыл бұрын
@@ernestmurphy3898 So true Ernie, I keep forgetting that the millennials know everything.
@gerryatrick
@gerryatrick Жыл бұрын
​@@ernestmurphy3898 I don't make videos on welding and am not a welder as stated, but others make claims that those that do have done it wrong and bag them, so if they are the expert and bag others then it's up to them to put up proof they know what they are talking about.
@gerryatrick
@gerryatrick Жыл бұрын
@@richardtemby4358 so who is the Millennial ? You?
@malikfabrication8629
@malikfabrication8629 2 ай бұрын
Nicely work
@samueloduro
@samueloduro Жыл бұрын
I am also interested in the kind of welding machine you use. It is very cool
@fleetsiderebel8274
@fleetsiderebel8274 Жыл бұрын
Mig
@FREEMAN....
@FREEMAN.... Жыл бұрын
Pleasant to watch esthetically speaking but from a mechanical point of view, there is no way this type of welding allows deep and strong fusion.
@jcliftoncavitt
@jcliftoncavitt Жыл бұрын
This entire video has the soundtrack of what 50 Cent would say yes to and put on his album.
@scor440
@scor440 8 ай бұрын
How do you know what radius to cut?
@johnjacobjingle8302
@johnjacobjingle8302 Жыл бұрын
Waiting for the pipe welds..
@Foodienation2
@Foodienation2 3 ай бұрын
Nicely done
@co-know-proconstructiontips
@co-know-proconstructiontips Жыл бұрын
Love this channel
@steventwiddy3402
@steventwiddy3402 Ай бұрын
Hey man this was a cool video with some great looking end results
@sonnyjim7579
@sonnyjim7579 6 ай бұрын
Some cool project ideas here!
@KornelKallai
@KornelKallai 6 ай бұрын
What kind (type, model) of welding machine is this?
@herreriagarciaymas777
@herreriagarciaymas777 Жыл бұрын
Exelente video
@jasoncooke3557
@jasoncooke3557 Жыл бұрын
You can actually see the joint after grinding all those tack welds off it’s cool and all but kinda bad info for anyone watching this new to welding or looking to learn
@David_Camerwrongun
@David_Camerwrongun Жыл бұрын
I've never welded a day in my life and even I know this is nothing but an appalling con artist who knows nothing about fusion
@inlineadam
@inlineadam Жыл бұрын
Any chance you can do this same kind of video for 2” circular steel pipe. Lol
@danieleder4863
@danieleder4863 Жыл бұрын
That welding is holding together nothing
@saigouravpurohit4910
@saigouravpurohit4910 Ай бұрын
The only thing holding the metal together are gypsy prayers😂
@abuyahya1043
@abuyahya1043 Жыл бұрын
Nice work
@ricardooliveirasette3994
@ricardooliveirasette3994 10 ай бұрын
Nu!!!! Q talento!
@WoodArtVlogs
@WoodArtVlogs Жыл бұрын
Very nice 😊
@syh8179
@syh8179 8 ай бұрын
What kind of welding is this mig or tig ?
@papadiouf5204
@papadiouf5204 7 ай бұрын
Dude you’re NICE 👍🏽
@pakhaqmkishakmaamor3562
@pakhaqmkishakmaamor3562 Жыл бұрын
Awsome..
@housemusicCRO
@housemusicCRO Жыл бұрын
Which welding machine do you use in the video?
@daitedve1984
@daitedve1984 Жыл бұрын
It's MIG
@JViello
@JViello Жыл бұрын
@@daitedve1984 I don't think that's what he (She? It?) was asking...
@yourdrummer2034
@yourdrummer2034 Жыл бұрын
It's edited to look that way.
@EarthsMajestySL
@EarthsMajestySL 19 күн бұрын
MIG
@FAUZIAKBAR89
@FAUZIAKBAR89 Жыл бұрын
Luar biasa cara pemotongn 45° macam2 cara 👍👍🤝🇮🇩 ny indonesia
@boots7859
@boots7859 Жыл бұрын
The last half seemed like a repeat of one you did a while back. I would love to see/hear a bit more about the welding you are doing. It looks similar to tack welding vs regular welding. Prob good enough for light duty, how strong is it compared to real TIG welding?
@JViello
@JViello Жыл бұрын
It's just a MIG welder pulsed. I've done it plenty of times around the shop doing various thin gauge seams. It's not better or worse than a straight bead. You still get plenty of pen, and if anything keep from warping surround material much less with greater penetration of a straight bead. You go fast and hot with the mig...too fast and too hot for a straight bead, and just pulse. Works great.
@stanleybiaz
@stanleybiaz Жыл бұрын
this is fake cold welding (check on The Fabrication Series channel).
@yourdrummer2034
@yourdrummer2034 Жыл бұрын
@@stanleybiaz yup. Edited to look that way. I bet it breaks easily, especially after grinding all the weld metal off.
@gerrymarzilli
@gerrymarzilli Жыл бұрын
NICE EDITING! ❤ Now so it in real time. Oh that would take 20 min per weld.
@Tazyz
@Tazyz 7 ай бұрын
You are a god
@cezaraugustopereirasilveir6550
@cezaraugustopereirasilveir6550 Жыл бұрын
Belo trabalho!
@ernestmurphy3898
@ernestmurphy3898 Жыл бұрын
Very accurate cuts and templates.
@Boon202
@Boon202 Жыл бұрын
What cutting blades are you using?
@simonpetermurrell
@simonpetermurrell Жыл бұрын
Incredibly clean workmabship
@TotallyHandy
@TotallyHandy Жыл бұрын
Thank you very much!
@barunpal8764
@barunpal8764 Жыл бұрын
Oh wow! I will try it in home. I❤️❤️❤️this vid. 👍👍👍👍👍👍👍👍👍👍
@AutodidactEngineer
@AutodidactEngineer Жыл бұрын
What drill do you recommend?
@saifuddindewaswala1252
@saifuddindewaswala1252 Жыл бұрын
Very nice work and videos
This Is How To Weld Pipes Like A Genius | Metalworking Project
10:17
Totally Handy
Рет қаралды 5 МЛН
The World's Fastest Cleaners
00:35
MrBeast
Рет қаралды 57 МЛН
M3GAN’s ARMY got my finger! 😱🦾 #shorts
00:10
Adam B
Рет қаралды 19 МЛН
In 10 Minutes This Room Will Explode!
10:00
MrBeast
Рет қаралды 51 МЛН
MINHA IRMÃ MALVADA CONTRA O GADGET DE TREM DE DOMINÓ 😡 #ferramenta
00:40
90kg Welding Table Build
12:50
GRINwood
Рет қаралды 2,6 МЛН
Top Tricks For Bending and Joining Pipes | Metalworking Project
10:21
Totally Handy
Рет қаралды 3,1 МЛН
Few people know about 1mm welding
8:02
الاسطي ELOSTA
Рет қаралды 1,9 МЛН
Only Homemade welders should know these tips
9:29
Mr Technic
Рет қаралды 9 МЛН
WHAT CAN BE MADE FROM AN UNUSED PHONE
4:46
Musiy4uk
Рет қаралды 15 М.
BEST 10 Ideas in TUBE cutting and joints For Welding
19:12
Mr Technic
Рет қаралды 359 М.
how to weld thin square pipe joints 90 degrees precision for beginners
5:45
Now you will learn welding easily and quickly!
8:54
Handyman
Рет қаралды 150 М.
14,000 Domino pieces Fail!
0:12
VIP MOTORS
Рет қаралды 15 МЛН
A raffle was drawn to see who won the grand prize #Officer Rabbit #Short
0:55
GADGETS VS HACKS || Random Useful Tools For your child #hacks #gadgets
0:35
Вьетнамские рыбаки убегают от приливной волны
0:11
Короче, новости
Рет қаралды 6 МЛН