What’s up Nitrogang! This engine is great man let’s see it ripping

Keeping 5B alive , love the video

Respect! That is awesome! I can't wait to see those running!

Awesome! Just received a zenoah G320RC motor from Dave's motors rc for my rampage , I bought a rampage used and in good condition but original 32cc fulie engine was bad , your video inspired me to get a Zenoah for the redcat. Hope to have installed tonight! Then break in procedure

Stoke to see the redcat getting back in action! I got one because of your first redcat xr video! NitroGang

Awesome bro, I can't wait to see more content on this original HPI Baja running with a fresh Zenoah Motor. Congrats!!!!👍

Yes sir! Can't wait to see it running!

Great video and side by side comparison for the gas rc newcomers. Glad to here the G320 going in the redcat Rally Xr

I’m like you just picked up a 95 civic hatch to be my daily driver to replace my impala, love my impala but I know the civic will last forever. Keep up the good work. Picked up a 5b myself and getting ready to rebuild it. Love my nitro and gas engines.

Nitro gang thanks for sharing very information blessed love to all knowledge is power hopefully everyone pays attention keep up the good work you got a really good deal on everything 🙏🏿🙏🏿🙏🏿🇯🇲🇯🇲🇯🇲

Awesome segment good to know there’s resources out there for nitro or gas motors. Can’t wait to see how your new projects come out and perform.

I absolutely can't wait to see it in your redcat! You definitely need to do some before and after video's!

Awesome dude. I have a g320 in my rovan baja and it pulls wheelies. It's a great engine

Love the HPI Baja! cant wait to see it run!

Hey Hybrid! Great tutorial on those engines and the different brands alot of info! I seen in the comments that your going to try to put the helicoils in the exhaust bolts to save the engine and have a nice backup that would be a great video! On the new engines are you going to put some screen protections on them and outerwears too? I've used screen and JB Weld works pretty good just wondering? Can't wait to see the new one running in the Baja! OGNG🤔😉😎💪👍

Nice one braaap brotha some real power engines zenoah ftw 🤘✌️

PREVIET!!!! Spasiba Bellshöy!! How are you you Crazee Nitro duder!! 💯🤜🤛 I'm loving the direction you've taken your channel in. One of the very few channels that has MAD love for the Fifth scale FOSSIL FUEL 🥵 BURNING 🍼 BABIES!!!!! 💯👍 DAGAVARELES?? Keep them coming mein friend, God Bless RC!!! 👍🏁🏁

Great video Dmitri on the different engines and different RPMs and everything!!! You’re exactly right red cats suck!!! That G320 is going to make your red cat fly!!! Great watching my brother!!!

I bought a Zenoah G320 off E-Bay for my Redcat Rally XR someone took out of a 5T, brand new, I got it for $254.. shipped. That was 6 months ago. Now that you're going to put one in your Rally. I wish I had done it sooner I could give you my opinion. But I'll just wait for your opinion and set up so that I can get it right. Can't wait to see both Zenoah's ripping.

I have a few CY 29cc engines and they’re great but Zenoah is on another level

I was wondering were the rally rampage had been. Zenoah baby. That’s gonna be sick

I have one of them and it's performing really good much more power and rpms which give my truck more top speed and way better acceleration

Great Vid! I would have just got a new top end for that zenoah which prob comes with a piston and pretty much brand new! But great stuff congrats on the new motor!

Really interesting video. I like that you went into great detail and actually know your shit. I personally don't know anything about the 1/5 scale game. I am learning tho and who knows maybe I'll dive in one day. As a matter a fact I was recently looking for that orange Rovan that you got a while back but they are sold out right now. I used your link in your video. And I definitly want that particular model with all the aluminum upgrades and shock towers and bulkhead reinforcements and what not. I believe it was the "King Motors" one... It had better tires as well. Nitrogang4Life

1/5 scale baby!!!

Finally !!!!a new video!

And that new intro is awesome. . .have you had that drift car on here before??

2 speed baby you are the man another GREAT VIDIO ma dude. Awsum DETAIL on the engines. ***** i am a 2 speed baby nitro gang dude 100 !!!

I have a 30.5cc baja 5b, any tips on tuning, like what do I start with the high speed needle or the low speed first,

Bro those zenoah’s run for days nice set 👌 You gonna do a video on the dynamite .19 on your buddies T-Maxx or what ? Lol Nitrogang been waiting 👍👌

im excited for the redcat rally with a zenoah in it

Nice bro..had zenoah back in 2008 love your channel! No bs. Keep it up bro shalom and peace from israel

hell yeah man thats sick! i just traded my g320 full mod ported esp i had with tuned pipe for the dbxl for some other rc stuff and cash. I wish i knew you were looking for one man i let it go cheap! i included a new 813 carb and bartalone pipe for only 400$. the motor was 550 alone

Just ordered a BB211 from DDM for my Rovan 5B Oval Dirt Late Model for spec racing! 2-stroke Baby!

Ralphie!! Ralphie Boy! Zenoahs rock! But the CY is $100 cheaper and rips fine!

I recently bought a redcat rampage and the hy30 motor in it is garbage. I ordered a senmubery 32cc motor off amazon for it. Is it a good mototr or a bad one?

Can i use this as a generator to charge my ebike on the go?

Zenoah strong baby 💪🏼💪🏼💪🏼 #nitrogang

Hi, the G290 is enough for der Baja.

Zenoah handed down there wicked when modified

Cool! I just wish the guy I bought my 5t from knew what running an engine lean was and what a break in was, the hone marks are pretty much gone from the cylinder lol

Those are some really nice engine's.. Can't wait to see that HPI Baja rip. After break in of course. Ha.

The Baja is going to fly with that new engine.

Yeah the 290s pretty crazy I’m 165 pounds and I put it on my go ped scooter spindle shaft driven and with a proper pipe I’m going at least 32 mph with the weight of the scooter and me those engines are straight crazy it’s a good performance card they give you two let’s see some action I wanna see some jumps man I’ve been doing nitro RC planes lately

Nice vid man I didn’t realize official duck studios made that video Hahaha

Hey man, my fiancee is proud to drive her 2nd gen Prius, and she has an Escalade too!

What about Rovan 36cc which is buggy asi?

I didn’t know that the weed eater brand husquarvana made Zenoah engines

Hello hey great videos big fan! I have question maybe you know about iam new to the 1/5 scale rc I have rampage mt I just installed a new zenoah G320RC from Dave's motors in Utah in it since I bought the rampage used and could not start the original 32cc motor and out of frustration bought the G320RC complete new ready to go,and was wondering I've been breaking in the engine and I have a homemade silencer a small axe can drilled out both ends stuffed some alum foil in it for baffle & ducktape around it to hold it on to truck to be able run it in my neighborhood for noise control it really lowers the cracking sound to half the noise pollution and kinda wondering it might be running a little hot! I havent full throttle it yet alot of idle& just half to 3/4 throttle for 1 to 2 seconds burst and for about 6 to 7 minutes run time up and down my street. So If I spit a little on my finger and touch the chambered part of my exhaust redcat special pipe the spit sizzles so wondering if normal and should I keep running it like this for now until I get out on a course?? Any input would be great , like i said iam not running it super hard running rich and semi loud lol!plus I noticed the cover on the zenoah dosent allow air flow over or thru cylinder head when driving forward the plastic cover that covers head and top of spark plug blocks airflow if u understand? Thank you sorry very long question

Been using a g320rc for 2 years and not a single issue

Zenoah is literally the os version of gas rc's

G32 is about 16.000-17.000 rpm get a good pipe for it and it will blast bro! Waiting for a video

Awesome bro they make the best engines. Another option if the heli-coilz don't work just replace the head on the engine they are fairly inexpensive. Keep up the great work.

Hi there, you should strip down the HY? Engine and re profile the port for more RPM , then she will fly and throw up 🤮 rooster 🐔 tails. Awesome video and a great haul of engine’s. 😎👍👍👍🇬🇧

You really need to get a goped, man. The G290 is an excellent motor for a Sport. Just look at the most recent video on my channel of swapping my cy290rc motor from my rovan baja 5b onto my sport.

Great vid bud zenoah are great engine s bud

Hey bro. Have you ever had any nitro rc from the HSP brand? For the on the road verson and rally version they have 2 speeds baby! It’s cheap but not that reliable 😂

Let me add my 2 cents if you notice the 990 stops at 29 cc. 32 and up gets the bigger more power performing 1107 Walbro carburetor. Zen engines are awesome no doubt. Rovan engines are great too! Zen has better quality control. Better bearings and better seals. But for the price you cant a beat a Rovan engine also King Motor 34cc and 30.5. Allen had assisted them both in some Rovan and those king Motor engines and thats one reason they run well is because they listened to his suggestions. However its evident they do not listen to all of his suggestions, hence the poor choices of internals for the 71 cc Rovan shown on my Channel. Any who just wanted to share! Great vid and congratulations on your beautiful new brap hearts ❤️ 🤝🤝🇺🇸🇺🇸🦾🦾

You can use fix a thread in there. I did it in one of my motors and it works great.

Just got one for mygoped

My obr 33.5 has a stripped muffler screw.. I stuck a bigger screw in it. Working good over a year later but I'm going to catch hell with it in the future ☹🤦🏻‍♂️

That bolt size issue is easily repairable! You've got 2 options.... Thread it for a larger bolt or it can be fixed to take the bolt size your wanting to use. I can't recall what they call the process but Harbor freight likely has what you need. Basically you tap the inner diameter then they make a reduction tread that twists into the thread you tap. The bolt then pressure fits the reduction threads. I have done this on Automotive applications and it works well.

Good day bro..just wanna ask,,what walbro carb is alternative for wt 1107 of g320 rc?..thank you in advance

Great purchase mate!!! Best bang for buck is the Zenoah G320RC for sure. I noticed you're still using that crappy pipe on the Baja. Unfortunately you will have to invest in a proper tuned pipe if you want max performance from that engine.

I can start my rovan baja 5b 30.5cc with 1 or 2 pulls without the choke on,

Nitro gang!

Ok i have a correction. In 1993 the traxxas had a zenoah g2dhp as the g230rc had only just came out in 2000-2001

Very interested to see how that Zenoah engine performs compared to the Rovans.

What spring is in the standard baja 26cc 8000 or 6000

lol i think it says hobby grade only because they also have the chainsaws and weedwackers engines too

U said that u visited israel when u were yonger..well..come visit israel again before israel comes to visit you..hihi..your welcome here any time bro tel aviv is beautiful!!!

The things i could do to that Zenoah engine with my rotary tool ;-) Husqvarna Zenoah Co. Ltd??? So Zenoah is now owned by KTM? Not a bad move if you ask me, they're specialists in 2-strokes!

0:27 this looks like some kind of ritual.

Dude, I had to lower the volume.. 🤦🏼‍♂️🤯

Anything built in Japan is high quality

👍🏻

if only i could find an original baja for cheap.

You need to pick up some Permatex ultra black polyurethane it’s a GASKET MAKER It would totally work on ur exhaust That and red loc tite the exhaust bolts U don’t need much just smooth it around with your fingers cmon

*box of engines...

Funny thing is that the current generation of dodge v8's aren't actual hemispherical engines.

I love you

Shit 20 seconds and 25 views damn man i was trying to get here first haha

Hybrid32494 redcat is super popular all there nitro and 1/5 scale out of stock now schumacher they disgust me only one nitro thats bad

Japanese vrs Chinese. Japanese all day long for quality of engineering

get all thread in a good grade like 8.8 ..and make studs makes life easier and thing seal up better ..blaa blaa.,, Mc mastercar for supplys .pruisu is the only japan made thing i hate Japan makes good stuff the older stereos sansui are great get one re-caped never regret it no modern stuff dor home sound system dolpy junk

Bro, your intro is wayyy too long