Great video! We appreciate your business.

Bolt on are my favorite thing to do in the beginning stages . Great video !

Thanks! Seriously considering this and the LT2 intake for my '18 Camaro SS 1LE.

Keep the content coming 👍

Beware truck owners this throttle body will cause idle problems that will basically be impossible to get rid of. I have 2016 6.2 E85 with full bolt ons including lt2 intake and 95mm throttle body.My tuner tried several times to correct idle but says throttle body just lets in too much air when fully closed causing computer to cause negative timing issue at idle. Aside from idle it’s running very good. There may be a slight torque loss in midrange but it pulls way harder up top. Tuner says if I swap cam than he should be able to resolve idle issues.Kinda sucks this is the case because it runs plenty good for me right now.

Great video man keep it up

Well that plug and play on a fourth GEN 6.2 with a LS3 intake

Nice!

Bro LT2 intake manifold nothing Gains like that huge!!!! Gains.

Just ordered this for my 6.2 cant wait to get it, thanks for the part number

Did you ever post the intake and if you did. Did you keep the stock gasket or just use silicone to seal it up. I'm getting redy to do this on my cammed L86?

Anyone please tell me which model of intake manifold ans throttle body for l83 gm sierra 2015.. 5.3 engine 6.L I want in holley or fast... Please help in this anyone

Bought this to pair with a msd ……. 🔥🔥🔥🔥 lt1/10l90e OBS ftw

Is there an actual video of you driving after the install? Do you have before and after comparisons?

😎🤟

Does this make any difference with no cam or head setup? Its a nice setup and good video but im curious as to if its worth the money even when you do port and polish the manifold. Also will it help with mpg at all? And i thought you had to have a tech 2 scanner to relearn throttle body did something change in the k2xx trucks.

👌

Great video as usual - would it make sense to switch out the throttle body if you don’t port the intake? Or would it be a waste or cause issues? Thanks

L86 will take up to a 91 without an adapter plate?

Did you have any issues leaving the green seal behind the adapter plate Until you could get it ported? Or do you recommend removing it if you're waiting to get it ported

Great video, nice job

I have a 08 yukon Denali will this throttle body work on it and do I need to have my truck tuned? I have a s&b cold air intake stock tune

Hey bro is that the stock coupler for the s&b throttle body ? Because I’m getting the lt5 tb as well but I don’t know if the s&b cai will fit it

Ive got a 16 Silverado, borla attack exhaust tsp long tube headers , tsp stage 2 cam and kit, intake. Appropriate to get an lt5 throttle body or more committed manifold? All comes down to the tune for sure. Any tips are appreciates.

What if I do this but don’t get the l86 manifold ported to match the lt5 can’t a tune fix air flow/idle issues ?

Did you have to tune the throttle body?

It’s dyno proven that it does not increase power. A total waste of money

👍👍

Are you keeping the stock intake? Or porting it? Will a c7 intake manifold fit?

Y nada en español ?

Is it worth it porting the intake and throttle body? Ive been thinking about taking it to Reaper but idk if its worth it for my G8

do you think it will fit a 5.3 l83?

I also have the 6.2 on my 2018 and was thinking of porting my stock throttle body - I can get the same deal as you on the throttle body b/c my cousin works for GM. Would it be better just to get this even though I won't port my intake immediately? Did you notice any gains before porting the intake? Did you have a hard time installing the rubber coupler for your intake tube with the larger throttle body?

I wonder if that fit 2020 silverado 6.2?

Hey bud, Did you have any trouble fitting in the coupler for your Air intake? I’m worried that I might need to get one that fits but not sure where to get one since I have the 5.3L. I’ll be upgrading to the ported L86 mani and the LT5 Throttle body.

Have a 5.3 tuned would I have to retune it once putting the l86 manifold and lt5 throttle body

That throttle body is huge compared to stock

3M Marine 5200 works good too man

Looking at swapping my L83 manifold for the L86, and stepping up the throttle body. I know Katech makes a 103mm, do you think 103mm is too big to port the manifold inlet to fit? Not to worried about clearance as I know there is an adapter plate out there to flip it 90 degrees, it might actually clear not sure yet. Think it would be close. What's your take on this?

Great vid ! I have a 2020 GMC 1500 6.2 Do you think the same mod would work on mine?

Nice rig brro, thanks 4 the vid n infos.🇺🇸mine is also Whyte chevy 6.2.once u Goo 6.2. U DON'T go anyless .brro ,keep BUILDING ur rig.2022 GMC ,AT4 n AT4X. They r nice but wayyy 2 pricey.once u FINISHED with ur built urs going 2 run circle around the 2022.🇺🇸

hey bro I installed a ported l86 intake manifold and ported lt5 throttle body along with a corsa Cold air intake and was wondering if you had any idle rpm issues ? if you revved the rpms in idle, did the tachometer do a irratic up and down revving once you let go of the gas? mine did and maybe it's because it needs to relearn the wider throttle body

Notice any improvements right off the hop with the butt dyno?

great videos, i also have a 6.2 denali, i would like to ask you a few things regarding your build, how can i contact you? thanks