@@user-uc3qf9hw6g MX5 3 Rotor and S14. My bad on the S chassis
@ahmadzulfani28121 сағат бұрын
Bismilah Allah hummah sholialla Sayidina Muhammad semoga aja bisa jadi drifter dan mekanik profesional seperti king drift aamiin ya Allah kun fayakun dengan cara kerja keras aamiin ya Allah ❤❤😊
@user-rs5yh3ey4tКүн бұрын
Wow, nice work! I noticed that unlike the rotors in the stationary gears they do not have racing bearings fitted! I was wondering why this choice was made! I have also always wondered why the racing bearing when used is only mounted on the rear stationary gear but not on the front stationary gear!
@KyleMohanRacingКүн бұрын
@user-rs5yh3ey4t Whether you go with a 3 window race bearing or multi-window main... Properly set up, both can easily achieve a thousand horsepower and 10,000rpm. Sometimes I feel like race rotor bearings and three window mains displace a little too much oil at times. Especially on a three rotor.
@michaellaframboise7646Күн бұрын
So the pistons have you in sight my friend!In my day ,I would have bumped you over,but since 33 years I am a rx7 fc owner. Brrrappppp
@peterga3658Күн бұрын
i love the Rx8 .this car look sooooo good .
@KyleMohanRacing20 сағат бұрын
We agree!
@NancyDLawКүн бұрын
The body kit on this rx8 with that wing look so fucking good man so good ❤❤❤❤❤
@KyleMohanRacing20 сағат бұрын
thanks KMR setup
@Lifeofjhb2 күн бұрын
You never cease to amaze me. Here I am looking elsewhere for info on how to swap to wisefab and z4 rack. All the info is right here❤. You’re awesome!
@indianmarshmello.2 күн бұрын
I just bought this car on Forza Horizon 5 Formula Drift car pack. thankyou :)
@OKAMIKNIGHTS2 күн бұрын
fucking awesome as usual !
@mobiusone99972 күн бұрын
We've ruined the traditional drift culture 😢
@duncanmcgowan18782 күн бұрын
How
@tlovsoe42112 күн бұрын
do you know how the msp rx8 exhaust sleeves are secured.
@KyleMohanRacing2 күн бұрын
@@tlovsoe4211 pinned as well
@tlovsoe42112 күн бұрын
@@KyleMohanRacing has anyone ever created a new center exhaust port that is not siamese.
@peterga36583 күн бұрын
love the tx9
@Side_Sh04 күн бұрын
Is KMR hybrid engine project dead? Was hoping to see a semipp all motor dyno numbers to see what it can do.
@KyleMohanRacing3 күн бұрын
@Side_Sh0 No. Its alive. I just doesn't pay the bills. Sorry to say I would personally not do a semi p port motor and run it, na. Cool idea... Just not in my plans.
@carlospalma38754 күн бұрын
This rx8 feels like the last living rotary in FD, It makes this one makes it special then majority of the cars and more awesome, Love the Content!
@evilpanamajack4 күн бұрын
this channel needs more views
@KyleMohanRacing4 күн бұрын
@@evilpanamajack thank so much for the support
@ClwnJuNkY4 күн бұрын
I love the sound of the 3 Rotor sooo glad you rep the 3 rotor hard !, cant wait to see Madmike let rip in his 5 Rotor .
@abisaelfelix73944 күн бұрын
I have a quick question regarding an oiling system mod. Sorry it doesn't have to do with the sleeves. Haha. I've been looking to build myself a race 13brew engine and been wanting to get the loop line mood so I could also run solid dowels. Is the loop line mod really necessary in high hp or can I just run a line to the front iron through where the turbo oil feed comes from and call it a day? Love the videos BTW! Very informative. 🙏
@jamfd3s7884 күн бұрын
Hey Kyle, would you recommend this upgrade for FD housings or not really necessary on those since they don't have the restrictor?
@KyleMohanRacing4 күн бұрын
@jamfd3s788 That's personal choice. We didn't see a difference on the dyno, but it sure does look better without the egr holes.
@pobbb2224 күн бұрын
That rx8 is what drifting is about, Kyle driving is an OG
@KyleMohanRacing4 күн бұрын
Thanks so much.
@ClwnJuNkY4 күн бұрын
I have to get some of those Sleaves ! Is there some for 12a ?
@kenharris87434 күн бұрын
How much?
@krisbuck21654 күн бұрын
Comment people jump this lad up
@ahmadzulfani2814 күн бұрын
Bismilah Allah hummah sholialla Sayidina Muhammad semoga aja bisa jadi drifter profesional seperti king drift aamiin ya Allah kun fayakun ❤❤😊
@jvest65154 күн бұрын
Yessir 13k subscribers
@ClwnJuNkY4 күн бұрын
Should be more !
@jvest65154 күн бұрын
@@ClwnJuNkY I agree
@jeancharlesrabaux56586 күн бұрын
Et suspension mini
@jeancharlesrabaux56586 күн бұрын
La blanche et sous gonflé
@kzarnold36787 күн бұрын
Interesting stuff 🤔
@kzarnold36787 күн бұрын
Interesting stuff 🤔
@s123fro7 күн бұрын
Speaking of 12a parts I have a nos 12a rotary built by dunkin aviation back in 85 and then stored away its in amazing shape. Hate to comment on your video trying to sell it but id sell it complete (all rotary parts) for 7500. Its brand new from the rear iron to the front cover. I have the receipts and book on the motor as well. Just putting that out there for anyone Interested. Im selling the aviation parts from it for 1500 also haha. 😂
@fourfive555558 күн бұрын
So I just bought a header flange for the hybrid engine but who do I go to for deepening of the rotor to accept 2mm
@jeancharlesrabaux56588 күн бұрын
Un 1L8 qui mais à l amende tout les v8 et v10 du globe pas de piston juste un triangle qui tourne dans un rond 😂 et 10 pistons reste derrière 😂❤
@jeancharlesrabaux56588 күн бұрын
Moteur rotatif non ou 2jz non roto ❤😮
@Caterisma10 күн бұрын
Welp he’s going into witness protection
@julioloperena952910 күн бұрын
I love your KZfaq channel but with that being said you never give us prices w much it would cost to drop 20b in an Rx -8 or an Rx -7 engine in an Rx -8 and if you can use ECU from the Rx-8.
@KyleMohanRacing3 күн бұрын
@@julioloperena9529 prices vary.
@ClwnJuNkY10 күн бұрын
Started my rotor up in minus 7 degrees C . Smooth as fire up no problems .
@evanpurcell354610 күн бұрын
Awesome, my rotors look great! Can’t wait to get them back and finish building my engine!
@BeemerBox10 күн бұрын
Any updates or thoughts about building/ using a 4 Rotors in the next FD season?
@henrylima697410 күн бұрын
So nothing on the hybrid motor. Dude alot of people subscribed just for that. You failed us miserably
@s1ckksn0w10 күн бұрын
Hybrid motors have proven sub par results regardless. Still staying tuned for the hybrid updates as I find it interesting (hopefully get a dyno sheet) but he’s probably busy with other builds so the hybrid motor is on the back burner.
@henrylima697410 күн бұрын
@@s1ckksn0w problem is that there is not info on hybrid builds, why are they sub par?
@indianmarshmello.10 күн бұрын
@@s1ckksn0w Guy on youtube called Rad potential, doing a hybrid build, you can check his stuff out, it is pretty enjoyable.
@KyleMohanRacing10 күн бұрын
@henrylima6974 There are actually a few builds out there and there is documented information. I've even posted a video with the Mazdatrix. Dyno chart. 420 to 440hp at 14psi t4 turbo. Street port hybrid build. That actually respectable numbers.
@henrylima69749 күн бұрын
@@KyleMohanRacing ok but are you still finishing the hybrid build or not?
@Diminishedfith11 күн бұрын
I drifted off into a sweet peaceful nap listening to that engine. So beautiful.
@BrandenWolfe-i2n11 күн бұрын
Car said "YALL MFS PRAY THESE STRAPS HOLD ME DOWN ELSE I MIGHT GET PSYCHO UP IN HERE"
@evilpanamajack12 күн бұрын
Kyle whats the cost of this rebuild
@evilpanamajack12 күн бұрын
good info
@sticky_blackice12 күн бұрын
Soooo sic
@curls654212 күн бұрын
What a beast, such a great sound
@21PHAZES12 күн бұрын
love an underdog🫡
@21PHAZES13 күн бұрын
i love the Eflex fuel livery on the rx8 it fits it so well
@shainymphe14 күн бұрын
Have you Ghost Ported yet? I only just started talking about this recently, perhaps the Renasis plates for exhaust are steam to flush the exhaust out completely ready for the next cycle? I won't divulge all the correct information at once... LOL, V8 driver... Got back there.
@wadegadsby832514 күн бұрын
Is that the hybrid engine - rx8 Glse rotors?
@kwanleung149114 күн бұрын
Does the gsl-se rotor housing accept the rx8 oil injectors? And would i run into issues if i run the omp and the oil lines into the gsl-se housings