Thank you!

@@CaptainHavfun-lp4ok np !! Gonna start my collection soon ahaha I’ll see if you have any videos on doctor who figurines

I know what you mean. We don't really get a figure that has it all. IDK why it was so hard for MAFEX to make a better figure. BTW, the FIGMA stand plugs into the figure. I assembled it after the video. It's AWESOME. You can spin him on it! I just hate the exposed ball joints.

Around $150 each. This channel is not monetized. I just do this to help people. Please like and sub. When I get over 1k subs, I can use the money to start a toy drive for kids in DTLA.

@@CaptainHavfun-lp4ok hell yeah great vid and ill sub

@@onlinewithamd4789 Thank you!

Thank you so much. didn't build the Figma stand. It plugs INTO HIS BACK. You can spin it 360, and not worry. I wish they made toys like this when I was a kid. I feel you parts breaking. A leg on my Batman 89 NECA broke. Had to glue it back on. If you wanna see the stand, before I post to YT. It's on my Twitter x.com/Captainhavfun/status/1808970397842616465/video/1

@@CaptainHavfun-lp4ok 😊👍

I'm RUTHLESS!

Thank you very much.

Thanks. I gotta make an update. The Figma comes with a flight stand. I just didn't want to take the time to build it on cam. But it plugs into his back. No claws!

For Homelander? My unboxing vid wouldn't play. IDK why. Bought a new memory card. BUT, I'm making an unboxing, review, and comparison video for 2 Mafex figures, and their McFarlane counterparts. People keep overlooking one figure. So, if you like Mafex, that should be posted in the next few days. I'm just waiting on one figure to arrive.

YOU ARE CORRECT SIR! Especially when you don't add the hair! The only faults with the Mafex head sculpt is that he can't look up. They didn't include laser eyes. But, I'm gonna make a vid on how to make laser eyes for any figure. So, people can put them on any figure they want.

@@CaptainHavfun-lp4ok I was originally going to buy the Figma because of the meme face, but when I took a closer look, the figma looks too cartoonish, so deicided to buy the Mafex instead.

​@@karlluigi1987 Yes, depends on what you want. Mafex has a better face, but can't look up, unlike Figma. Figma also has an AMAZING stand that plugs into his back. No claws! It's much more durable, and fun to play with. I didn't know it wasn't a normal stand, when I opened it. But, it's an actual toy. ZERO stress, when I wanna change his pose, or even let a kid play with it. On his stand, you can SPIN him 360, and not worry. IF Mafex had made the shoulder pads like Figma (and not the hinged on weirdness), I would say it's about as fun to play with, as Figma. I love having both. For Mafex, try using the chest piece with the open flap. It stays on a lot better. Google the NECA Homelander. REALLY cartoonish.

At first I was putting them on the wrong eyes. They click right in. I love how Mafex looks, but if you saw the whole video... Stuff just keeps flying off it. Same thing happens to my Rocketeer chest piece. Have you ever had the blue shoulder hinges come off? I was posing his arm up, and both pad and hinge came off. Thankfully, no carpet. So it was easy to find. But it's TINY.

Would you like me to make a video, showing how make laser eyes, that will attach to most 6-8 inch figures? I've been thinking about doing it. My Superman figures could use some.

I don't necessarily need it, but im sure others would find it useful, good youtube shorts actually!

But as for the arms I've came around to working with he arms to not pop the pads off, but at the same time I've left it sitting for a while so it hasnt happend in a long while, then again I still work around but not enough to push me away to try have fun while messing with it, the chest piece is annoying, but the second chest piece going out has a tighter connection than the chest piece it already comes with, so I use that one often, but when I want to see that loose chest piece I simply use pieces of regular paper rolls to kinda put in the socket when I attach the piece, makes a it less likely to pop off, but u have thought about maybe putting super glue, and constantly take the piece in and out as the glue cools down to hopefully create enough friction to keep the chest piece secure, but I havent dared to do that yet, the paper technique has worked fine for me tho, even then it can still pop off sometimes, but I just use the second chest piece nowadays

Just went back to mess around with my homelander, and I have absolutely no issue moving the arms without the pads or hinges coming off at all, the moment i lift the arms up the pads actually move out the way perfectly, i even applied some minor force while posing and no, perfectly fine, but another thing i forgot to mention is that the lower torso does pop off if i make it cruch back a bit too much, ive worked around by now tho, im probably making it have more range than i wish it too but i do consider doing a super glue trick on the lower torso oeg connection maybe

What do you want to do with it? I actually need to make a short. The Figma's stand PLUGS into his back. You can spin him 360 degrees, and he stays connected to the stand, and "flying". IDK if that matters to you. The plastics are very similar, if not the same. If you really want the alternate chest pieces, and bit bigger cape, then Mafex is the must have. If you like to change poses, and or play with him, Figma is better.

@@CaptainHavfun-lp4ok i like to pose my figures fighting other figures, and I feel like the mafex one might have a slightly better sculpt and paint, but I definitely want the laser eyes and if the figma one is more poseable that’s probably the one I will buy

@@user-gv3rm8vz4f It's much much easier to pose. You have to be careful just lifting the Mafex arm, because his shoulder pads pop off a LOT. IDK if YT will let me do this. But I have a pic like you're talking about. x.com/Captainhavfun/status/1779162331509031223/photo/1 Good example of the laser eyes, and fighting pose.

@@CaptainHavfun-lp4ok thank you. I think I’m going to buy the figma one

Would you like it, if I made an easy how to vid, to make laser eyes, that can connect to almost any figure? The blast would start at the eyes, to make it easier to attach. I'm doing it for some of my Mafex, and other 6 - 8 inch figures. I just imported a Mafex Batman Knightfall. So if you like that, I'll be going over it, and my blue and gray Mafex Batman Hush, soon.

GOOD JOB! I've heard Gamestop is the place to go, for these figures. Some friends got theirs from 2 Gamestops.

​@CaptainHavfun-lp4ok gotten a lot of my dc stuff from Game stop

Hi there, Russell!

Put them heel to heel. The same "frame" was most likely used. The abs are the same shape on Beetle, and Brainiac. My MIL noticed... and that says a lot. I worked in merch. Companies are always trying to save. McFarlane is not unique. I'm not saying they're the exact same sculpts. But they use some of the same parts, and basic design. Just like Darkseid, and Killowog share the same design. Same exact height, size, and their feet are same size/spaced.

@@CaptainHavfun-lp4ok I’m not understanding what you mean by “they use some of the same parts”. Maybe they were built up from the same generic frame. I don’t know if that was by hand or digitally but the details of the sculpt are completely different. Boots are different. Arms are different. Blue Beetle has details sculpted on his chest that are not simply painted. The abs are not the same shape. Maybe similar but definitely not the same shape.

Yeah. IDK. I know Jason was around back then. But wasn't this supposed to be Dick Grayson? It was a remake of the Super Powers Robin. Right? Obviously, the button was new but that's it.

Yeah. It looks great. It just falls apart constantly. Be careful with the little blue hinges that hold the shoulder pads on. My floors are cement (in studio).The house has light tile. So, it's wasn't too hard to find it. But, without it, the pads will not stay on . That's why I say, if you just wanna show him off, buy Mafex. But, if you wanna have fun with your kids, or just enjoy putting him in silly poses, Figma is better. I kinda love the laser eyes attachment too. I have both figures close to each other, on my display shelf.

Hey hey hey! How goes? Thanks for watching my vids. Much appreciated. I see you like, and comment. Hope you're doing well.

See, that's why I got it. Was because I hadn't seen one with this symbol. There are others that have the Hush like Batman look. Like Mafex Hush Black. I think you'll like it.

You mean my voice? I had to have surgery to on my vocal chords. Plus, I'm a big guy. YEAH... I HATE my voice. When I did radio I do the voice you might sometimes hear me slip into. It's higher pitched. THANK YOU for watching my video. I do these for you guys, and to give me something to do. This vid cost me almost $600, buying 2 of each figure.

yea no worries i love ur channel and trust me the figures are great

HA! I think kids might find an interesting name for that.

Thanks man! Hope you're well. My wife was thinking of sewing a baby super hero costume. But he won't be on my channel much, unless he wants to.

As soon as I was done. Blue Beetles, and Brainiacs showed up. So, Every figure but Gold Sinestro. I guess McFarlane is finally releasing them.

Hi there!

I don't always buy them. Some are sent to me. I used to work for WB, among other prod. companies. BUT for collectors, who want a complete set, it's a must have. The new Fleischer Superman is going to have the New Birth Superman head sculpt. IDK why they wouldn't use the wave 1 sculpt.

I'd like to see it. What bran of paint did you use?