my car doesn't have abs, so i am not ready for this problem

I have a BMW 335D X drive and I also had a host of codes appear although this was due to rodent damage on my engine wiring loom. I posted a video (jerry walker) showing the cause. I use a really nice scanner called a Launch 2. It reads the VIN and then connects to the internet to find what options are supposed to be fitted so it knows what to scan for. I used it to clear the codes and it works really well. It also creates reports based on the stored codes and has detailed explanations on what each code means.

Bimmerlink for checking / clearing codes and Bimmercode to mess about with settings... plus a £10 bluetooth OBD scanner from Jeff Bezos shack.

Good video .. I have a similar set on my car .. overall better performance but do you find the brakes are noisier when applying.. mainly noticeably when window down ? Cheers

Sorry to hear about the fault. Mad that your channel has less than like 20k subs Reg. Quality and delivery is really up there, hopefully enthusiasts will flock to you as you carry on making content 🎉

The little triangle with the ! Is the check control warning. It comes up for all sorts of reasons. The ABS rings used to be an issue on the previous generation of 1 series. The shafts swell up and push the toothed ring into the sensor. If the end of the ABS sensor is worn, you need to do driveshaft work. Don't bother with Carly, just get BimmerLink as someone else said, and a Bluetooth adapter for about £20. It would also work with torque

Does the car sit for a few days? Usually why the sensors die off!

Bimmer link

It just a gimmick it looks good

Great video. Thanks for the update. So many sensors on modern cars these days. Mostly though the one series seem quite reliable. Just the usual wear and tear issues. 👍

Issue: Insurance 🤣

Great work. Now do the same with black paint car.

I am looking for a car that i can do around 5k road miles per year and drive to / from 3 or 4 track days a year. I assume the Mods made a fair difference ? Any negatives ?

I've seen a few that say you must apply the snow foam, then agitate with a sponge before rinsing. You'd be better off with a bucket with detergent, a sponge and a hose.

blown headgasket

Did you end up getting to the bottom of it?

How does it compare to Bilt Hamber Auto Foam

Moot tire here in the states, since Michelin does not want U.S. to have them, at all it seems, and even IF and when they do, they will never let us have the 215/40-17 size which is PLENTIFUL over there in the UK, and in Europe. ☹👎

I have a 4 seat 05 Rav4, 240k kms on it, awesome car to get around the city, never failed me driving long distances in mountainous condition, all around one of the best and last well made automobiles.

You are comparing very much different tyres. Pilot sport should be compared to Goodyear Asymmetric and not Supersport. Supersport are more track oriented tyres and of course they have less grip in wet

autosmart snowfoam is the best

I just applied mohs evo and love it, but I am not sure it's right for me. I have black paint that is so easy to swirl and what I want more than any other property is hardness and swirl resistance .. would pure evo or another brand have been better with higher sio2 content or otherwise

Jesus Christ everywhere I look there’s a dead ting m140i video on KZfaq 😅😂😂 Everyone is obsessed with them who can’t afford a proper M car or an rs3 or Mercedes etc. They are good for getting power out of them but they are just a cheap clapped out 1 series with a big engine. A 17 year old on minimum wage could afford 1. 😂🤣

Lets not forget, EBC pads are on the cheap side, so for the price they preforme very well.

you need to test it on th whole tank. *only watched the final minutes...

I did the same change. From a F20 M140i to a G21 330 Mpacket

Is it to loud for daily use? Any drone on the highway?

Plug a diagnostic machine in to and read the codes.

I have noticed yours are crumbling on the edges, mine looks similar after 12k miles. I wonder what's the reason for it?

Idling is mostly fine (as long as your cooling system can handle it, see hot summee's day), BUT don't use it as a means of "warming up" the engine before ragging on it. Idle warm-up is uneven, unlike part-load warm-up, which will set you up with the wrong clearances in some places. Not a good way to get to redline...

I recently discovered that Dynamite is a very impressive tire cleaner. My tire sidewalls were brownish, I used AF Verso APC at 20%, AF Imperial wheel cleaner at 20% and BH Surfex HD at 10% dillution ratio - each was a step stronger than the previous one, but the sidewalls, although now very clean, remained slightly brownish. Then I remembered I had a little bit of AF Dynamite at 10% ratio somewhere in my closet. So I just tried it to see and to my surprise the brown substance started to melt right away. Repeated few times and the tires finally got black. Even started to smell new and fresh again lol. Nevertheless, a genuine surprise for me. I thought BH SFHD was unbeatable but in this niche corner it was surpassed. Cheers

If you buy the right brand it's incredible... great video

Just got one today and I love your take on it. I was so worried from every ones comments online that said handling / and just how it has a bad chassis / requires mods. I'm not taking it to race tracks and just daily driving and I feel its sooooo good and don't need to do anything <3 Btw can't you remap to stock after remapping as its just software?

I'm new to driving and have a Golf MK8. I've been looking at the PS5 as my new tyre but they only seem to do XL in the 225/45/R17. Will they be good tyres or should I find a tyre that isn't reinforced? Sorry if this is a silly question but it's all new to me. Thanks!

I had this issue on my 2019 240i in 2022. Topped up and it's been good since 🤞. Cheers Reg👍

In what proportions to mix the foam?

Intresting to see if just soap in water would be just as good just because its not a real comparison of water against detergent

Cut everything put an x pipe in the middle and THEN you will unleash the sound of this engine

What a good video. Thank you!

Its only cleaner because that side got to soak for 5 minutes.

Changed from OEM MPSS (5mm+ still left but edges worn and in the cold/damp they were crap, but EPIC in summer!) to PS5. SO disappointing as they're clearly a Touring tyre. So much understeer, no feel and quick wearing rears which I changed to GY AS6. Night and day! Huge wet/cold grip and SO quiet, and sporty feel.

Just ordered PS5 for my bmw 430d xDrive Stage 1 plus.

I was hoping and glad that you'd addressed the smell 😂 it's absolutely disgusting

2.8k for insurance yet stage 2 scirocco is 1.4k with mods listed. Someone explain this logic?

I've had a 2003 MkII Rav4 D4D for a few years; 3 door, same (ish) spec as that. Awesome lil car tbh and you're 100% wrong with the steering; must've driven a shit one or you can't drive :)

Great results

Ive never been blown away with autofinesse apart from their drying towel. Same as you i use bilt hamber normally

I already seen lots of videos being positive on the PS5's. Ordered a set of 4 to get on my Abarth 595 Competizione!

I wish here in Spain car prices were like in the UK. Over here, they're 30k +

It seems that koch chemie super foam, is better.