Hi there! Have you ever had ice build up on your unit during the summer ac months?

Didn’t work for us. They went under it

Ez igy nem lesz tartós. A hordókat ne a deszkák tartsák, hanem a keret!

I wish more videos were like this!

Geese won’t land on land????? I guess the 200+ I shot last season on land never happened did it Mc Fly

Thank you for the video!!!!

Tried it on our 7acre lake with beach where the Canada Geese are the problem. They chewed through the string with their serrated mandible cartilage of their bills. Next I used vinyl coated wire. They tried to gnaw through that but couldn’t. Worked for 2 yrs. 3rd year they started either ducking under it, or bunny hopping over it. 4th yr they could care less about it. They won.

Should I turn of the switch outside if I'm using gas

Man, why the heck would you put down the camera at the one part we need to see. I know you are alone but you could have put it on a stone or something. Sitting out here and my hole won't connect even though it looks like it should and i can't find one person putting it in.

What is the putty stuff used to seal the cover gap?

How long is the rebar? I can buy 2 foot or 3 foot, I think 2 foot might be two low after driving into ground?

I can not see the supply list for this on either video

How come mine is stuck in the on position I cannot push it to off no matter how hard I try, I wish to reset buttons. I’m getting propane heat to my hot water heater, but not electric.

That is a prize-winner for sure ! Best in SHOW ! Pure breed !

I like the Blue Ice Caper Camper ! Pretty cool ! Looks like a great spot- Winter, Spring, Summer or Fall !

Thanks for posting, it helped me out man 👍

God the fact these filth of legally protected frustrates me

Wow! You completely missed the broken O-ring on the filter cover. Hope it dint leak and start a fire😮

Fantastic job. We are about to build one. Thank you for sharing. 😊

Has Yamaha fixed the heat problems with the glove box, and side panels?

Ratchet straps will fray and weather/rot, especially with just fastened with a screw, you need a big washer on there. Best solution is 3/4” stainless steel strapping, then use two #10 1-1/2” self tapping stainless steel screws to secure it. And you want the screws in the side of the joist, not bottom (as you’ve done with the ratchet straps) so they are holding with shear instead of tension to resist pulling out over time as the wood softens from moisture Even better is running the strapping over top the joist then securing, this way the top of the joist is taking most of the force and the screw is just holding everything in place. Just need to pull the deck boards at each mounting point to do this, then screw the board back down and the strapping is hidden

Helped me out. Thank You. The shop was going to charge me 50 bucks to change my taillight unit that I already had. My taillight had moisture in it because it was cracked and I needed a new one to pass inspection. I found this video and changed the unit myself

For many years I have used the wired Strada Cadence CC-RD200 with the sensor installed on the rear wheel because I use the bike with the trainer. I recently bought the Strada wireless CC-RD310W, the problem is that I only use the bike with the trainer, and according to the instruction the sensor should be installed on the front wheel. It is useless to me because with the trainer only the rear wheel moves. Any tips, can the sensor be installed on the rear wheel and still work properly?

Take the Pulley off top first then put the belt on big pulley at bottom , then set belt in pulley you removed then slide the pulley back on and save taking the plug out lol ! That's the best and easiest way . Blow your nose before you start mister !

Did the dummy rinse the filter off in the water it seemed like

Just did it from underneath on passenger side. Looked from below and at bumper height, estimated where the light was, found light socket, vertical about 1.5 inches high, gave it a quarter turn counterclockwise and pulled out. Replaced bulb without touching glass using tissue, doesn't leave body oil on bulb, reinsert socket with quarter turn clockwise. Tested, all good. No tools needed. Just a few minutes. Got a 4157NA bulb from Autozone. Video is helpful for the headlight, side marker light and to drain any water from assy.

How this fucking works

A paper or card disc insert between grinding disc & mounting flange reduces the risk of uneven pressure on disc, so less chance of shattering.

Thank you so much man I’ve been stuck trying to get mine working and now it works❤

Thank you! Thank you for taking the time to post this. It gave me confidence to make this repair on my own. Much appreciated!

Installing is no problem . What ? Nothing about programming it

Thanks

How do you get the computer off the clamp? There is nothing in the instruction booklet just pictures. I need to get to the buttons on the bottom but the clamping unit is in the way.

does it run hot?

Thkse are carriage not lag bolts.

That dog knows if it concentrates hard enough and long enough a hand will eventually reach down and throw that damn ball.

worthless!

I'm disappointed. I thought this video was going to solve a problem. Seems like the equivalent of demonstrating how to put your pants on.

Ours doesn’t have the sticker so thanks!! 😂🤙 u have such a meditative voice too btw. Do u do any guided meditation videos? 😅

So a question I had maybe already answered but, how far do I turn the water spigot when connecting it to my pressure washer or does it not matter?

We had a horrible geese problem and had nothing to lose by trying this easy solution. It totally worked and haven't had a problem since. We couldn't believe it! Thank you for sharing.

Purchased: August 2023 - still works GREAT!I kzfaq.infoUgkxxsUnXhGsSJLim_XnMHyQK0u3XVaW-CGn live in a studio and during the summer it gets scorching hot - really old building with no ac units. I can’t express how EASY it was to install. This unit has been a life savior during the summer and some days during other seasons where it can still be a bit warm at night. In this small place is my friend, a husky, poodle mix and myself. We need AC - lolI don’t use the dehumidifier option - I’m not sure if it will leak in my house, since I did not install the small draining hose that came with it. May look into it late but I don’t worry about much humidity in the apartment. I don’t understand why the negative reviews since all things mentioned, I personally did not find issues with. Definitely worth it!

$200-$250, LOL Welcome to Biden's America. My 12'x12' will be $2000 #FJB

Drill an 1/8 hole at bottom of bulb enclosure for water to drain

You might ruin your slide that way. Now not enough of the movement from the inside of the rest of the rig might knock the slide totally out of it's track. It's not made to be supported. They need to move with the rest of the movement from wind on the outside and foot traffic on the inside.

This is my third iteration of the Garmin Edge range. kzfaq.infoUgkxXZCtB-wGdHVTBSz8RswePK5vllHNi06N Clearly they have refined and improved the experience offered over the years. Unsurprisingly it gives all the usual features (speed, time, distance, etc). Additions such as power meter and heart rate monitor allow for additional metrics, all of which can be displayed on customised screens. The features that are most useful for me are ClimbPro, which details climbs on routes (very helpful when you haven't ridden them before), the mapping and the scores provided on training effect. All in this is an excellent piece of equipment. The battery life is strong. I've never had it crash/freeze. Integration with Garmin Connect/Strava works well and the live track has proven useful (my brother now knows when to put coffee or dinner on because he can see how close I am to home).

very cool dog. But worried about his teeth. :(

That’ll never work. Replace the whole hose! The rest of it is brittle too.

You should have mentioned the use of a thin layer of dielectric grease smeared on the inside of the rubber boot or as i do on the ceramic part of the spark plug is a must. It prevents the rubber boot getting stuck and also prevents any arcing/spark escaping the boot. Also you should have said to make sure you check that the gap is correct, i have bought the correct spark plugs several times and the gap has been way off, even closed sometimes. Correct plug, correct gap, a little dielectric grease on the ceramic and the correct torque when tightening and job done. It says on the pack how much to tighten to crush the washer 👍. I do it buy feel.

DO NOT TAKE IT DOWN UNTIL LATE FALL, They will never give up, and each year the new geese come back to make more new geese. letting the grass grow high where you are not using the shore line also keeps them from walking up on shore. Until Canada realizes the geese are not endangered and we should allow hunting them, Geese will rule our water ways . and POOP cover our lawns