Michael Miedema

Пікірлер

@alexsilantyev4848 6 күн бұрын

Hello! Where did you get most of these new parts? I’m on my way to restore my 510 I just got from a guy here, I need to fix for sure grass seed box and fertilizer seed box , as the gears there are really bad, can you some how have an email contact do I can ask any question to you?

@michaelmiedema9687 6 күн бұрын

@@alexsilantyev4848 you can get most of the parts from a Case dealer, but some aftermarket parts are a lot cheaper at www.shoupparts.com/products/planter-parts/case-ih/

@SteveKoenig-x7r 16 күн бұрын

Are you for hire?

@michaelmiedema9687 16 күн бұрын

@@SteveKoenig-x7r I’m not, just do it as a hobby. Thank you for watching!

@TheFunc1056 Ай бұрын

Great video, Where did you find majority of your tye parts?

@michaelmiedema9687 Ай бұрын

www.shoupparts.com/products/grain-drill-parts/tye/ The ones I couldn’t find aftermarket I ordered from the dealer, which is parts.agcocorp.com/us/en

@kyleparr2077 Ай бұрын

Thanks for showing the growth and not just the planting.

@dougprentiss 3 ай бұрын

Thanks Mike, exactly what I was looking for to rebuild my seeder.👍👍

@terrymick-kf2pn 3 ай бұрын

Michael, your work is beautiful ! Do you fabricate cultipackers to sell ? Or do you have a used one e for sale ? Never hurts to ask right .

@michaelmiedema9687 3 ай бұрын

I have not made any for awhile now, thanks for watching 👍🏻

@samelliott2236 3 ай бұрын

1:45 How do ya get the disc openers off?

@michaelmiedema9687 3 ай бұрын

After you pop the center cap off there is a bolt underneath. You need to turn it the opposite direction as the disc would turn going forward. One side has right hand threads, the other has left hand threads. This way when the drill is moving forward, the discs tighten the bolts on both sides keeping them from coming loose

@samelliott2236 3 ай бұрын

Thank you!!

@j_b_civ808 4 ай бұрын

Mike, we located a hub and got it installed. Works great; thanks for the tip. The next project is to replace the seed cup on the far right side of the drill when standing behind it. Based on your video (19:46) we'll need to remove the entire rod, replace the cup and then re-install the rod; correct? Any tips that we should keep in mind as we execute? Thanks again! Jeff

@michaelmiedema9687 4 ай бұрын

I found it’s a lot easier if you have a second person to help you put it back together, otherwise it’s pretty straightforward. Glad things are falling into place for you!

@j_b_civ808 4 ай бұрын

Mike, Great Video. I hope you are still monitoring this thread. A friend of mine and I just acquired a Tye 104-4404 pasture pleaser. Today the drive coulter broke where it connects to the disc (hub) that drives the chains. I've looked at several Tye parts stores on the web but can't seem to locate the part number nor the actual hub. Would you happen to know the part number and a parts dealer that would have the part on hand. Thank you so much! Jeff

@michaelmiedema9687 4 ай бұрын

An AGO dealer should be able to get you the part, but it will be pretty expensive. You may be better off trying to find a used one at a farm equipment salvage yard. www.agcopubs.com/parts_book/english/000-1208/104_114_drill_series_iv_series_v_5_7_ft_no_till_

@j_b_civ808 4 ай бұрын

@@michaelmiedema9687 Mike, thank you for the quick reply!!! In the last hour or so I've submitted about 8 web forms for salvage yards in Ohio, Indiana and Kentucky (where I live). I'm hoping for a reply tomorrow..... Have a great evening.

@j_b_civ808 4 ай бұрын

Mike, do you happen to know the year that the 104-4404 was manufactured?

@michaelmiedema9687 4 ай бұрын

@@j_b_civ808 I don’t

@lyonna7499 4 ай бұрын

Maybe my favorite so far, thanks for the dimensions.

@waynegalyen6176 5 ай бұрын

How long did it take to plant 3 acres

@michaelmiedema9687 5 ай бұрын

A couple hours, a lot of stopping and turning around in this field. When I’m seedling my firebreak around a large field, I can do about 2 acres an hour

@sheilamclaughlin963 5 ай бұрын

Use wheel bearing grease, it’s better than gun grease

@jimmyfaulkner5746 6 ай бұрын

Thank you . Just about to order my cover crops and I didn't consider this , excellent information

@markstokes6075 6 ай бұрын

Great job

@Albert-cf1es 8 ай бұрын

What color paint did you use?

@michaelmiedema9687 8 ай бұрын

The orange is what the powder coat shop had that was close to the original color, I’m not sure the name of it, the green is forest green

@charlesdaily5549 8 ай бұрын

Just came across this, want to do this to mine. What is the color of white used?

@michaelmiedema9687 8 ай бұрын

It’s international harvester white, you can find the paint at Tractor Supply, I had mine powder coated, and they were able to match the paint

@charlesdaily5549 8 ай бұрын

@@michaelmiedema9687 ok thanks, it just seems brighter than that paint

@davidbaker5701 10 ай бұрын

Wow! Amazing work and tenacity. This was so satisfying to watch.

@CentralMississippiWhitetail 10 ай бұрын

Great channel

@pauldelongpre202 10 ай бұрын

Mike, I am also in Michigan and have just purchased what looks to be the same unit. I loaded it with rye seed in the large seed hoper and planed. It looks to be planting over 200 lbs of seed / acre! I can not see and way of reducing the flow of seed. I like you have a 20 tooth sprocket and could start bu changing it to 10, but is that the only seed flow adjustment?

@michaelmiedema9687 10 ай бұрын

You should be able to open and close the seed cups by loosening the lock bolt on the large wheel on the side of the seed bin ( where the chain is attached to the sprocket). By turning that wheel it will move the square bar that goes through the seed cups to open them for more seed, and close them for less seed.

@pauldelongpre202 10 ай бұрын

@@michaelmiedema9687 Is that for the large seed box also. I dont think mine has any wheel on it, just on the small seed box?

@michaelmiedema9687 10 ай бұрын

@@pauldelongpre202 it should have two, one with a 6 inch wheel for the large seed box one with a 3 inch for the small, they should be attached to the end of the square bar that runs through the seed cups

@octavianbundra5610 11 ай бұрын

Excellent illustration

@gansamazinggrazingfarm4790 Жыл бұрын

Just picked up a 104-4404 pasture pleasure need 4 press wheel frame almost 500 piece from agco and shoup doesn’t have them. Do you know of anywhere else to get parts new or used thanks have great day

@michaelmiedema9687 Жыл бұрын

Wow, that’s expensive. I guess I’d start searching the equipment salvage yards. I think they put the same ones on a lot of different models. Good luck 👍🏻

@gansamazinggrazingfarm4790 Жыл бұрын

@@michaelmiedema9687 thanks, ya that’s what I thought to if I have to I guess I’ll have to make my own it was going cist more for those than for all other repairs it needs great video by way

@michaelmiedema9687 Жыл бұрын

Not sure where you’re at, but there is a large AG salvage yard in Indiana that ships parts if needed.

@drewreylea1 Жыл бұрын

Are you still making them

@kdkragt Жыл бұрын

Do you remember what the seeder opening was? I am planting sorghum and buckwheat. I was trying to figure out if a 1/4 inch gap will work for me.

@user-pb7yg7xv2t Жыл бұрын

Great job rebuilding your Tye. It looks great! I have one but not in nearly as good a shape. Can you tell me what size the drive coulter is supposed to be? Mine came with several coulters that were different sizes, due to wear I suppose.

@user-pe2sl2ze3n Жыл бұрын

Ive just purchased one just like yours. Its a pasture pleasure, but its a little rougher than yours was. Was wondering if you'd mind sharing some info on parts leads. Thanks

@michaelmiedema9687 Жыл бұрын

I’ve had really good luck with Shoup for a lot of the aftermarket items, but found some things you can only get from your local AGCO dealer. They took TYE over awhile back

@kurtknapp6201 Жыл бұрын

Thanks Mike, I just finished making my 3pt cultipacker using this as a guide. Appreciate the informative videos.

@BradFess-jo8to Жыл бұрын

I could watch this video 15x and still love it. Great job! Maybe I will be able to eventually have a no-till drill if I do it this way! Excellent video and explanations. Thank you

@timh8257 Жыл бұрын

Great pictures at the end. Love your videos Sir.

@timh8257 Жыл бұрын

Fantastic video man.

@timh8257 Жыл бұрын

Fantastic content right here.

@dennisbenjamin1782 Жыл бұрын

How many acres of beans did you plant where cage was?

@michaelmiedema9687 Жыл бұрын

3 all together

@46DJR Жыл бұрын

Mike, what horsepower tractor do you use to pull the 510? Is the 510 a 12' wide drill?

@michaelmiedema9687 Жыл бұрын

It’s a 10ft drill, and I was using a 40hp, but it pulled easily, I’m sure a 30hp would be fine

@drewerickson7069 Жыл бұрын

What is the trick to getting the old double disk openers off?

@michaelmiedema9687 Жыл бұрын

One side is right hand threaded (normal) the other is left hand threaded.. it’s designed so when the disk is moving forward the bolts tighten on both sides. You want to turn the bolts towards the back of the drill to loosen them. Hope that helps

@teenanrelshensari4033 Жыл бұрын

Home made cultipacker with manufactured cultipacker parts, lol

@markcharlton9020 Жыл бұрын

Approximately how much did the rebuild cost?

@michaelmiedema9687 Жыл бұрын

Not sure on the total cost, most of it was the new discs and powder coating. Everything else was just time.

@CPUDOCTHE1 Жыл бұрын

If the holes are at least 5/16" you can have them cut and then clean them up with a carbide bit in a die grinder.

@patrickbell2767 Жыл бұрын

Mike, it's been 2 years since you posted this video. Hope you're still monitoring the thread. I have a question that's not been addressed in the comments. I'm in the process of restoring my family farm to a pollinator friendly wildlife sanctuary/ tall grass prairie, southern Oklahoma. The 1st (35 acres) parcel is now ready for planting. The seed mix, which is heavily forbes, as well as native grasses, is 'fluffy'', as native mixes are. I noticed your drill doesn't have an agitator to keep the heavier seeds from settling to the bottom. The newer drills seem to have agitators. Do you think this is an issue for uniform distribution? Are you pleased with the out come of your plantings 2 years ago? Would appreciate any insight you (or others) may have.

@michaelmiedema9687 Жыл бұрын

The drill have done very well for me planting beans and many cover crop mixes, but it doesn’t do very good native mixes. They are too fluffy to feed through the seed cups. I don’t know if mixing the seed with something like pelletized lime would work or not.

@patrickbell2767 Жыл бұрын

@@michaelmiedema9687 Thanks for the follow-up.

@robertkey8922 4 ай бұрын

tye has another box for native grass seed mikes drill doesn't have it it bolts behind the small grass box is about half the size of the main box it has adiitator shaft plus feeder cups for native grass.@@patrickbell2767

@adnacraigo6590 Жыл бұрын

Nice fabrication and good paint job.

@catchemalive Жыл бұрын

Is there anything you would change now?!? Fixing to try to build one just like yours. Thanks a lot for the in depth video

@michaelmiedema9687 Жыл бұрын

I had pretty sandy soil, if you were in heavy ground, you may need to be able to add some weight to it

@catchemalive Жыл бұрын

@@michaelmiedema9687 this will be in agriculture ground. Fairly dense ground but not bad

@michaelmiedema9687 Жыл бұрын

Let me know how it turn out

@strake338 Жыл бұрын

About to go through this with the Ty I just picked up. Do you recall what the powder coat code etc was for the seed hoppers, frame etc? On the green pieces...spray paint, what color code, maker of spray paint etc? Thank you in advance.

@donshepherd3854 Жыл бұрын

Great Job it looks amazing. I have the dame drill. Do you know where I can get the small seed cups? I have a couple broken and can't seem to find them.

@michaelmiedema9687 Жыл бұрын

I believe the person who had the drill before me replaced all the small seed cups with Great Plains seed cups. I don’t know any more than that on mine

@donshepherd3854 Жыл бұрын

@@michaelmiedema9687 sounds good. Thank you sir.

@lilfamfto2897 Жыл бұрын

How much did the small pond cost

@richardemmons7610 Жыл бұрын

NICE !!!!!!

@jakesims6087 Жыл бұрын

My local agco dealer has never been much help for me with parts for my Tye drill, but I’ve had luck dealing with Paul Martin and son’s equipment in Napoleon, Ohio.

@eusebiomendez7596 Жыл бұрын

gracias me servira de arto esto😰😰😰🥺🥺🥺🥺😭😭😭 mi sueño es crear mi sembradora para poder sembrar

@Casecadeviewfarms5184 Жыл бұрын

Michael I have a model 10 best place to Source parts

@michaelmiedema9687 Жыл бұрын

Your local Case dealer should be able to get you most everything, though it may not be too cheap. I use Shoup for as much as I can for after market parts. Here is a good online resource, the diagrams are very useful www.messicks.com/cas/138977?sectionId=289573&diagramId=1136351

@billgranger1188 Жыл бұрын

Great video! I was wondering if you have any 5ft cultipackers with transport wheels available for sale or if you'd be willing to make one that I could buy from you?

@michaelmiedema9687 Жыл бұрын

Glad you enjoyed the video! I don’t have any for sale or in the works right now

@claycountykillers Жыл бұрын

The big wheels are off a mccormick deering soil pulverizer. Build back in 1926.

@wesball12 Жыл бұрын

Great video, I'm about to start on mine. If you were to add transport wheels on top, how would you do it?

@michaelmiedema9687 Жыл бұрын

I thought about that, one idea would be to bolt on some castor wheels www.harborfreight.com/10-inch-pneumatic-rigid-caster-38943.html

@johnnyholland8765 Жыл бұрын

I don't know what you have in that drill but I would bet all toll it is much cheaper than a new one. I have rebuilt a lot of equipment for that same reason. Your refurbished drill will last a good long time. Great job...

Ең жақсы KZfaq

Пікірлер