תודה רבה סייע לי מאד

What is battery part number? I have a MBAT18 -LI and can't get another charger for it unless buy a whole new drill. Bought it 3 years ago and hardly used it but can't find a compatible charger. Went in to B&Q to look and had a try but is different fitting

Thanks for this, I started by assuming the valve itself was faulty and was going to get a replacement. Glad now that I decided to troubleshoot first and found this video!

I'm guessing the 60v battery never happened and 5kw 72v was the go? I'm building a 4x4 velomobile with a 52v 2000w hub motor on each wheel 20x4 inch fat tyres and 8kw. Should be fun off road. It uses 4 batteries, one for each wheel and has 1600 discs and fully independent suspension.

hey i have a problem with my analog controller where the resister is faulty at higher speeds and at lower speeds its fine any suggestions?

Best demonstration on KZfaq!

Excellent tutorial, just changed the cross over pipe, you have saved me a lot of head scratching on what goes where. Great job thanks.

👍

The second lot work out more eco than the "eco" at 50p ( 25p an hour at the bulk price ) an hour Vs the first one 60p an hour, what's the brand of the second lot ? I use wood fuel direct heat logs, those workout at around £1.09 each and cheaper in bulk, last around 1.5- 2 hours ish when I have the air closed off about half way and they give off a lot of heat

Thank you, your video has been really helpful.Much appreciated.Jon Isle of Wight

Hello, good video of the tear down. I was interested in replacing the handle lock mechanism. My vacuum is not standing upright and is the up19 which is similar to the dc40 if not the same. I really don't understand all this model numbers, but when I look up a part for the up19 it also shows compatible with the dc40. Thanks.

My cars struggle over the lap counter without plenty of speed would the screwdriver thing help

What was the big block of concrete they removed under the lintel

Hi york knight . i have a battery car that probably dead it has 4.50 V . Can it weld my lithuim battery packs ?? And thx for the video

By taking that first bend out at 53", you'd actually fixed the problem. If you'd left it in the upright position you had it in at 1' 29" & replaced that first piece, it would have held it in the correct position & the Dyson would have stood upright perfectly. It was only the first piece you removed that prevented it. Someone had ovbiously removed it & refitted it incorrectly when the Dyson was in the angled position. I had exactly the same problem 10 minutes ago, & fixed it in 10 seconds.

What did you line the opening with on the inside to make sure its heat resistant?

Great video! 👍

Please was the minimum ah of battery for this

Superb! As a visual learner as soon as you pointed out the area around 30/32 seconds I got the problem resolved just from just seeing that. Only removed that side piece & nothing else, basically the rest was irrelevant for how simple it was : ) Thanks!

Branchement très compréhensif. Merci et bravo

Question for you? how do I replace the middle flexi hose, the one right under where the hinge is located which can see at 25min into your video please.

I need to try and get hold of replacement motor for one of our DC39. Any ideas in the UK

Doesn't look like a professional job at all. Not bad for a do it yourself but even then, could have done a cleaner job.

How long did this take until you could use as a fireplace?

I just taped up the pressure relief on my old vax, seems to fix the problem. I wonder if the spring loses tension over time (or is designed to).

Amazing work, I wanted to know if This was a mason chimney or a wood Chimney

My dc 40 doesn't seem to have any suction in the dust bin. Remove blockage from the hose coming from roller and the hose connected for the wands. Next step is cutting the hair from roller but I doubt that's going to be the issue. Any suggestions or recommended reading? Thanks! Been a great help in trying to fix the hoover.

Thank you🌞

That register plate sagging

Thanks mate, I'll be able to repair that DC39 thats been sitting in the garage with a bad motor for 5 years now :)

What about the animal 2?

the wrong tool for the job-

not seen any eco logs in Surrey

All these gimmick videos on Dyson radial root technology vacuums doesn't reveal the hidden issues that do go wrong. Yes cyclone separation has its advantages, basically in the eye of those cyclone centrifugal chambers, the air is cleaner. However with centrifugal forces comes consequences. Over centrifugal and cinetic oscillation ( in the newer) ones causes the real fine dust to get imbedded in those foam gasket, in the hopper unit ( I call it ) and works its way through the tips. These fine micron particles as they swirl causes static cling because some of these become electrically charged and cling to the plastic, no matter how much cyclone activity, these particles will not work loose and become caked on the tips and nozzle chambers. Dyson doesn't need to over technologize vacuums. Another thing is yes when in use the air is cleaner and it is bagless it reduces need of a bag and filters, but at what cost. First of all these caked fine particles over time in the chambers still carries pathogens that can grow and migrate in the crevices of the vacuum. Bacteria like dark environments. Any humidity will add to the spread. Washing that cyclone chamber assembly is a bad move because now, the crevices won't dry properly and now you've added an environment for bacteria to grow. The foam gasket on top of that chamber needs to be removed. The 7 t8 torx screws needs to come off and that foam gasket needs to be thoroughly dried, because if you don't take that off crevice mold will develop. You may need to order a new gasket for the top. Taking all the gaskets and seals out and cleaning the chamber ring completely of dust film will destroy the odors. Best bet is to take all the plastic parts of that chamber assembly and put it out in the fresh air for 12 hours and let it air out. ( It does wonders) My take on this project is this. Bagless is not always better and overboard on the technology is not simplicity and causes more issues in a short time. Replacing bags and filters are cheaper than this service process. This type of service for Dyson is not cheap. I have a Meile that I use constantly and it's from the early 2000. Bags and filters are cheap. I also know people that have an electrolux canister from the 60s and they still can get components. One can still get Bags for a filter queen. But a Dyson dustbin or certain filters are pretty much obsolete.

Awesome video. My Duct assembly the handle broke. Could you please show me how to replace it. I already purchased the part from Dyson. Thank you

[ Never loses suction ] unless this happens

Is there any chance you could post a video of how to put the hoover back together, just when you were dismantling the hoover I couldn’t see where the parts were from!

wheels done to 100-120Nm, "impact wrench" described as 500+Nm

Hi how much did it cost to remove and clean up (without installation of wood stove)?

I was completely freaking out my dyson was broken but this fixed it in 10 seconds. I love you

Great video. I need to replace the spring on the DC40 swivel lock. Could you show a close up detail of the spring and how it fits? Mine disappeared! Thanks.

Good job! 👍

Thanks for this, motor went on my DC 20 recently. Saved £100s by getting a new motor vs a new vacuum.

whats the price difference between sport and digital?

Nice and clear and concise. Thanks

Absolutely superb video, no loud irritating background music, nice and clear instruction. Keep up the good work Mr

So many people are dumping gas now it is unbelievable. Back boilers and heat stores are the new/old way forward the robbing gas companies can keep their bills !!

What did you replace the old concrete lintel with?

We've done the same thing and are so pleased that we did. Enjoy your 🔥

Diď they cap off the gas supply from the fire before they ripped it out,or did you have thàt done before they came in? Im looking at having one put in,and what kw is the stove,name and model would be good to know as im researching