Good evening I found your video very informative, I am trying to configure power fold mirrors onto my jaguar XFR have you done a video showing this it would be fantastic if you have if not is there any chance you could do a video or give me some pointers on where to look thank you regards Chris

This video was really helpful 👍

We have the same last name fletchers rule

Hi Leon - I'm having trouble here. My washer just buzzes/humms when turned on. Checked the capacitor which is 35mf - it reads 34.6mf on multimeter. OHMS test shows rise and fall 200k ok. When I test the plug you tested to the motor I get these results (Mine is a K4 Compact) C to N is 0.8. L to N is 5 L to C is 4.4 I'm not really sure what that means I was just measuring as yours but can see the difference - Do you know what that means please?

How do you take a jaguar xf 2009 model out of velvet

What happens when you can't put ignition on as its lost smart key after battery change it has nothing

Hallo, hallo. What's this then? "Oklahoma" playing in the back ground. Is the mechanic working in U.K.? Or an English man in Oklahoma?

Good video but you completely skipped over winding back the piston after showing us the tool to do that!

Excellent tutorial, thank you. Im just about to do this on mine, rear and front. Also thanks for mentioning the parking brake reset procudure by disconnecting the batteru.

Thanks for that my Mrs xf died same warning faults like you had.

Excellent, thank you. That filter must be the original, I suppose you could find out its age from the serial number. A disgrace to the Jaguar main dealer if it is. It just goes to show, a main dealer service history is not always what it appears to be.

Hi just a quick question how do i release the handbrake on my 2014 xf for a rear disc and pad change thanks

Absolute genuis

How does it handle HEAT

Hi, good informative video. Ive got same brakes and about to change my discs and pads . Can i ask, im having trouble getting a 9mm hex socket. Is that a 1/2" or 3/8" drive ?

Excellent video but with one exception. I wanted to see how to put the spring clip back on. You skipped that entirely. Getting the old one off was a piece of cake but it seems very fiddly to get the new one on and I feel sure there's a knack to it.

Where are you located please

Usually buy feasters microwave burger but supermarket have replaced with rustlers . I usually just microwave the whole bun and burger with feasters as per instructions . However i noticed with my first rustlers burger instructions were to toast bun and put burger itself in microwave where as i would rather just microwave the bun and burger at same time as was happy with feasters.

Hello I found your video an excellent source of information thank you. I wanted to ask you, the comments you received regarding the cheap lead is that the lead that comes with the SSD package. I am thinking a put buying the same as you for my XK 2010. I'm a member of the Jag owners club and having some very confusing issues with my electrics have asked for advice. I get either no response or told I'm on the wrong models thread, which is a great help. I have had my car looked at by my garage then an auto electrician who said go to main dealer and get a full diagnostic check. Sounds good but I'm disabled and have limited funds, so I'm taking a course on auto electrics and wanted your advice on the SSD system for my car. I don't mind the expense if it will fix my problems. Keep up the good work. Andy

Very helpful. Did the job no probs after watching this video. Spot on. Thank you 👍🏻

Big thank you. As usual first class excellent video . Very big help to all of us.

With the 2017 XF, the handbrake is always applied electronically. It needs to be disabled in the service mode.

Please, send me cable link

Bonjour j'ai une Jaguar XF 2013 clé non détecté j'ai changé la batterie plus la pile toujours la même chose merci d'avance

Great vid.

Good video thanks for all info

if the level rises in resivour when compressing the caliper someone added fliud to it

Hi Leon, how do i turn off my TPMS on my 2014 XF? THX

Noooo! The bun goes in the toaster!

Thank you Mr. Owl for your contribution

Could you not use the 12v socket next to the aux connection for the power thinking of doing this next weekend

Autism

Buns in toaster for a short while, burgers in microwave, I then put burgers under grill for a 1-2 minutes with the cheese on top, put small amounts of mustard, mayo, ketchup and the burger sauce on buns and add some red onion. Job done, improves the taste x5

Utterly pointless.

Thank you for sharing this. I was able to do this same job on my car today based on what you recorded 😊

Awesome video! Will this also work for Changing the disks and pads on a XF S Premium Luxury?

Awesome video! Will this also work for Changing the disks and pads on a XF S Premium Luxury?

Complete Krap not a toy for the boys because it is Krap

Any ideas what else could be wrong with the PSU if the rifas and c9 are good, having been replaced. And the plug fuse and psu fuse are also both good. There are no symptoms except the beeb is totally dead. 0 volts on the -/+ 5v rails. No sound nor Caps lock light. After C1,C2 and C9 what would be the next most common failure point ?

I have the exact same car....When changing the discs and pads. Do you need to plug it into a computer to tell the car to release the hand brake....?

brake judder... how long did this solve the problem before it came back?

love your suggestion about turning the wheel, so simple yet so brilliant!

That's some haute cuisine right there with the folded cheese and everything.

Thanks Leon, really interesting video. a great lesson to refer to.

Hi Leon, really interesting and helpful video, Thank You.

Mic the meat for one min, place meat in bun, mic for 15 secs, turn over and mic for another 15 secs. You're welcome 😁

Hi, my car has no wear sensors on the front but I’ve got no wear warning, and the pads are totalled, metal on metal grinding… baffled me why no sensor, I’ll find out if there is any on the rear today, also I thought the slider bolts were 9mm hex or is that just for the front? I had to take the full caliper off to change my pads as didn’t have the right hex Don’t suppose you got a good video on the brake booster seal have you on the throttle body, mines giving me vacuum leak codes, I did a smoke test and definitely coming from there, car is a 2008 xf sv8

Mines making a speakin sound ? Hmmm

Thanks for the videos, Leon. They will no doubt help me out as and when I become an XF owner in the not too distant future. One question though… would it be worthwhile charging this fuel filter every year/few years or every X thousand miles do you think?

Thanks . First class video as usual. God Bless you.