Great Video,what size and brand fret wire do you use?thanks
@zimnickiguitars3114 күн бұрын
@user-mb4db2fd6e thank you, I'm glad you liked it. On this guitar, I used the StewMac medium fretwire.
@markrock76 күн бұрын
Awesome video. I love how calm you are; I'd be a wreck doing something that requires that level of skill!
@zimnickiguitars3116 күн бұрын
Thanks a lot. It's actually a little less nerve-wracking working on something like that that is not functional: you can't really make it worse.
@MrJohntheHarp9 күн бұрын
Cool!! At last a left handed luthier :)) ile be watching more of these, Thanks :)) great workmanship aswell BTW
@zimnickiguitars3119 күн бұрын
Glad you liked it! Thanks for watching.
@JasonOkonski-rv3mx11 күн бұрын
Pro level here. Soon I will be attempting a black transparent finish on a solid ash body. Very helpful thanks!
@zimnickiguitars3119 күн бұрын
Good, I'm glad it was useful. Thanks for watching.
@mvecellio112 күн бұрын
Love the bridge clamp. Perfect tool for the job. Thanks for sharing.
@zimnickiguitars31111 күн бұрын
@mvecellio1 yes, it is!
@rockinghillbilly163013 күн бұрын
thanks for the tip on the Maguires, Jeff is the man 😎
@zimnickiguitars31112 күн бұрын
I'm glad it was useful. I will let Jeff know that he is the man. Thanks for watching.
@billywhizz792813 күн бұрын
Great work! 👍 It'll be satisfying for you to hear this old instrument ring again after all the work.
@zimnickiguitars31113 күн бұрын
Thank you very much!
@sinaTonewood15 күн бұрын
nice finishو
@zimnickiguitars31115 күн бұрын
@@sinaTonewood thank you!
@billywhizz792817 күн бұрын
I just watched all 4 parts, excellent work as usual! 👍
@zimnickiguitars31117 күн бұрын
Thank you very much! There will be several more parts in the coming weeks.
@joeyoungs842620 күн бұрын
My fretting process is about the same as you. I do nip the tangs back and once the fret work is done I fill the slots on the side of fretboard with a mix of hide glue and ebony dust. A super clean look plus it reduces fret sprout if the guitar isn’t well kept. Nice work and I admire your nerve using spruce. A very difficult wood to keep flawless through the build cycle.
@zimnickiguitars31120 күн бұрын
Thank you for watching. I don't often fill the ends with hide glue. Maybe I should try it again.
@joeyoungs842620 күн бұрын
@@zimnickiguitars311 I highly recommend it. It’s a very refined look in my opinion.
@tedblankenship364920 күн бұрын
Thanks for filming and posting this Gary. That's one special guitar! Been thinking about it all week lol...
@zimnickiguitars31120 күн бұрын
You are welcome to come back and play it any time, Ted.
@Man_of_Peace28 күн бұрын
do you know shellac polish?
@enzopalumbo2164Ай бұрын
The gap in that crack seems pretty large. Stuffing a bunch of glue in the crack won't do very much if you can't close up that crack. It doesn't seem like those clamps will close the gap.
@zimnickiguitars31129 күн бұрын
The clamps did close the crack completely, and the area that was pushed inward was stabilized by the large patch on the inside. If the crack hadn't completely closed up, I would have put in a splice of wood because you are correct, we don't use glue to fill a void.
@enzopalumbo216429 күн бұрын
@@zimnickiguitars311 ok. At the end of the video it didn't look like it was going to close up. I guess i had to wait until the next part.
@mvecellio1Ай бұрын
Excellent video. Very informative.
@zimnickiguitars311Ай бұрын
Thank you!
@5barkerstreetАй бұрын
sound like a very nice work environment
@zimnickiguitars311Ай бұрын
It is!
@lavalleguitarsАй бұрын
Definitely going to try this. I usually use brushing lacquer with a squeegee to fill woods such as Koa, Walnut or Rosewood, sand out then spray the final lacquer finish.
@zimnickiguitars311Ай бұрын
Brushing lacquer to fill the pores sounds like a good idea, too. I wonder which is easier to sand?
@lavalleguitarsАй бұрын
@@zimnickiguitars311 Like you, if the lacquer builds too thick, I just scrape back first as a preliminary level measure. Sanding lacquer IS MUCH easier than epoxy, IMO. Give it a try and let me know your thoughts. I've been doing this way for 40+ years. Have you ever just left it with the epoxy and no lacquer as the final finish, curious as to how that would work? The only drawback that I might see, is a thicker finish with epoxy that could inevitably change the instrument's tone.
@andreasfetzer7559Ай бұрын
After the "pictures" they used parallelograms
@zimnickiguitars311Ай бұрын
Yes
@JohnKoeningerАй бұрын
Where did you get the bridge?
@zimnickiguitars311Ай бұрын
I built it in Part 16 of this series.
@mattveneri2112Ай бұрын
Excellent work! Very detailed explanation throughout!!
@zimnickiguitars311Ай бұрын
Thank you very much, I'm glad you liked it.
@richardg7758Ай бұрын
Beautiful and a masterpiece in craftsmanship…….lovely sound too…..congratulations and thanks for sharing!
@zimnickiguitars311Ай бұрын
Thank you very much!
@richardg7758Ай бұрын
Hi Gary I’m in the process of searching for a reliable abalone strip supplier,i have seen a a few in china,can you recommend a reliable source…..thanks
@zimnickiguitars311Ай бұрын
I get mine from Rescue Pearl. I think Duke of Pearl is quite good, too, but I haven't ever bought anything from them.
@richardg7758Ай бұрын
@@zimnickiguitars311 thanks for your prompt reply,I’ll check them out now,I don’t know of they will ship to Europe but I’ll look them up first…..thanks again!
@zimnickiguitars311Ай бұрын
I hope this helps. @@richardg7758
@richardg7758Ай бұрын
One other question if you don’t mind…..why don’t you use the flexible abalone strips on the top?
@richardg7758Ай бұрын
@@zimnickiguitars311 it does thanks,checked their website earlier…..just posted a question but don’t where it’s gone….wondering why you don’t use the flexible abalone strip on the tops?
@paulleate5768Ай бұрын
hi, very interesting video thank you, is cellulose ok to use over z epoxy? many thanks in advance,
@zimnickiguitars311Ай бұрын
Yes, I have never had any problems spraying nitrocellulose lacquer over epoxy.
@colonelhathi127Ай бұрын
Hi I think the drilling jig is great! I'm just about to make a tailpiece myself though, and my intention was to drill the string holes through the square block - and then shape the curve afterwards? Is there a reason that I shouldn't do this?! 🙂
@zimnickiguitars311Ай бұрын
There's no reason at all. I have done it both ways, and it comes out fine. Thanks for watching.
@amhackdptАй бұрын
Great video! I know it has been a couple of years, but if you see this I am wondering how you would adjust the distance of the bridge from the 12th if the saddle slot is angled? I have plans for a Ramirez style guitar and it uses a slanted saddle. Looking at the plans, the bridge is aligned so that the center of the slot is right on 325mm.
@billdedrick1914Ай бұрын
In 1927 in the 000 series, Martin made only a 000-18 000-28 and a 000-45. They made 201 000-18, 44 000-28 and 20 000-45 in 1927..The 000-18 of course was the only one with Mahogany back and sides. It appears that a neck reset will be required here even though some of it is resulting from the body deformation from string tension for decades and decades.
@zimnickiguitars311Ай бұрын
Yes, it did end up getting a neck reset. That will be in a future episode.
@5barkerstreetАй бұрын
this guitar going to be a good job to watch
@zimnickiguitars311Ай бұрын
Thanks, I hope so.
@cisaac8819Ай бұрын
What is the main reason for the russ rod broken?
@zimnickiguitars311Ай бұрын
I do not know why it broke. Either someone tried to tighten it too much, or it was a poorly made truss rod .I do remember that the threaded part of the replacement rod was much wider, therefore stronger than the original.
@billywhizz7928Ай бұрын
I didn't think a sunburst finish would work on that guitar, however it looks really good. The grain has really popped under finish, beautiful!
@zimnickiguitars311Ай бұрын
Glad you like it!
@jonahguitarguyАй бұрын
Looks good! Sunbursts are tricky to spray evenly.
@zimnickiguitars311Ай бұрын
Thanks very much.
@5barkerstreetАй бұрын
killer man
@zimnickiguitars311Ай бұрын
Thank you!!!
@billywhizz7928Ай бұрын
No mean feat getting the scale length and all that entails right on a multi-scale instrument, and getting it to look good too. You did a great job on all that!
@zimnickiguitars311Ай бұрын
Thank you!
@2011MatzАй бұрын
Never put your hand in front of a chisel, especially when you are coming up against resistance. One slip, and you are out of action.
@2dazetakeАй бұрын
I finished a guitar with food coloring, I used blue and a little green and was surprised how good it works, maybe you could use red and do an SG with it,wow that filler is dark, hopefully the grain shows thru, you did a great job on that SG, didn't expect it to lighten up.
@zimnickiguitars311Ай бұрын
Thanks for watching, I'm glad you liked it.
@malcolmhouse95472 ай бұрын
Looks great to me 👌
@zimnickiguitars3112 ай бұрын
Thanks
@waynepower54782 ай бұрын
Great video! What type of saw blade do you use? I'm wondering what the kerf width is.
@zimnickiguitars3112 ай бұрын
Thanks, I'm glad you like it. I don't remember the saw blade I was using in the video, but I currently use a Freud thin-kerf ripping blade and in make a 0.100" slot.
@ralphlinsangan54822 ай бұрын
I really should watch more of your videos. It's a very interesting process! Also you ever wish you had a shorter last name when doing that heel cap inlay?
@zimnickiguitars3112 ай бұрын
Thanks, I'm glad you find it interesting. Yes, a shorter name would have been simpler.
@mvecellio12 ай бұрын
I am glad you never have peg-headed your throat. That inlay on the heal cap was amazing. Steady hands.
@zimnickiguitars3112 ай бұрын
Thanks a lot 😊
@billywhizz79282 ай бұрын
Great work! Love the heel cap inlay. 👏
@zimnickiguitars3112 ай бұрын
Thank you!
@billywhizz79282 ай бұрын
Great progress, looking forward to seeing this in finish and of course hopefully hearing it!
@zimnickiguitars3112 ай бұрын
Thanks for watching!
@rickfitzgerald44262 ай бұрын
The most consideration is how many coats applied and the thickness of each coat. 320 Is a bit course for final sanding. Too easy to break through or leave enough for continued sanding and polishing. Nice to leave some for later in case you need to remove a scratch
@christopherstanford55993 ай бұрын
🌹
@kevincrampton72463 ай бұрын
Zimnicki.jeff. 1937 Gibson L7 fantastic job from big Kev from the United Kingdom rockabilly should be happy with that guitar thank you for this video
@zimnickiguitars3113 ай бұрын
Thanks for watching, I'm glad you enjoyed it!
@billywhizz79283 ай бұрын
A great conclusion, thanks again!
@zimnickiguitars3113 ай бұрын
Thank you!
@rockinghillbilly16303 ай бұрын
Many thanks to you and Jeff for the great transformation of this guitar...... Greatly Appreciated
@zimnickiguitars3113 ай бұрын
I'm glad you like it! It was a pleasure to do the work on that old gem.
@UncleDansVintageVinyl3 ай бұрын
Beautiful work on a beautiful guitar! Thanks!
@zimnickiguitars3113 ай бұрын
Thank you too!
@MrGreglarry3 ай бұрын
Pure tasteful playing.
@kevincrampton72463 ай бұрын
Great job on 1937 Gibson L7 from big cat from the UK Manchester UK😊 sing the review of the big L7 with the love child from Alabama😂😂
@zimnickiguitars3113 ай бұрын
Thanks very much!
@billywhizz79283 ай бұрын
Thanks for sharing this, I like to see these old instruments. Whoever did the refinish made a good decision to show the grain on the back, it's wonderful.
@zimnickiguitars3113 ай бұрын
Glad you enjoyed it
@olgoat523 ай бұрын
I had a late 20's small body L7 that had the Nick Lucas inlays, no picture frame around the inlays. The '52 L7C cutaway I had had the split trapazoid inlays. That 37 is a beauty