AndysBusAdventures

Пікірлер

@gerard4441 2 күн бұрын

suspension, especially a vehicle with kdss, is so frustrating to work on.

@andysbusadventures 2 күн бұрын

There is a learning curve for sure. But it is worth it in the end.

@TheNewAmericanMedia 17 күн бұрын

Thanks! Trying this now.

@andysbusadventures 16 күн бұрын

Awesome!

@dkmelch 28 күн бұрын

How they holding up !?? I need to do the same to my car .

@andysbusadventures 23 күн бұрын

Still holding up the same since day 1.

@stainlesssteve25 2 ай бұрын

Nice video. Do you use a tool to unscrew the oil filter?

@andysbusadventures 2 ай бұрын

Usually I do not. But depending on who put it on last, you may need to use one. Thanks for watching!

@Beet1ejuice 2 ай бұрын

PITA. Why could toyota engineers made it easier access?

@andysbusadventures 2 ай бұрын

Good question! I have changed my oil so many times now that it feels normal. Thanks for watching!

@Tahara-Aichi 15 күн бұрын

I love spending time doing it for my 22 trd orp

@andysbusadventures 2 күн бұрын

@@Tahara-Aichi I enjoy on it my old 2010 as well!

@Lithium023 10 сағат бұрын

@@Tahara-Aichi same in my 2020 my 1999 and my 2003. Sooo much fun lol

@liberaltears1714 2 ай бұрын

Can you get in & drive away or is it going to turn itself off when you hit the brake to shift into reverse/drive?

@andysbusadventures 2 ай бұрын

If you remote start and get in without inserting the key and hit the brake, it will shut off.

@16minimonster16 3 ай бұрын

That silver drain plug thing that you put in on the bottom of your old oil filter. Is that a sold separate thing? And is that what that’s for?

@andysbusadventures 3 ай бұрын

The silver part of the oil filter is part of the filter housing. It should already be on your 4Runner. To the best of my knowledge, it is there to drain your oil out of the filter canister so it does not make a mess. A lot of people will not use it and therefore they will not replace the o-ring. The Toyota oil filter replacement kit will come with the filter, two o-rings and the little plastic drain that helps you drain the oil before taking off the entire canister. When replacing the metal part at the bottom of the filter, do not over tighten. Also, do not use that metal part to tighten the entire canister. Thanks for watching and hopefully that helps.

@opinionatedviewer7730 4 ай бұрын

How's the ride is it stiffer then stock? I'm approaching 100k on mine and starting to think about options.

@andysbusadventures 4 ай бұрын

I replaced the stock and I noticed it was much stiffer but in a good way. Less rolling around corners and less of a nose dive when braking hard. You will get used to it pretty quickly.

@rabbitwranglerrabbitry6265 Ай бұрын

Hey, what’s your lift height? Did you have to change the UCA? I bought the with 2” lift springs for the rear. Just trying to deside if it will work.

@schoolguy94 5 ай бұрын

What is the inside diameter of the tubing to extract the fluid?

@andysbusadventures 5 ай бұрын

3/16 inch inner diameter.

@Kelly-ou8lg 5 ай бұрын

What size tubing should i get

@jdl1543 5 ай бұрын

Amazing so glad I found your video! I had just purchased this for my 2011 4runner and their instructions provided did NOT work. After spending over 4 hours using their provided programming guide I had given up and was going to return it today. Found your video and guide and worked the first time after I did the reset! Thank you again!

@andysbusadventures 5 ай бұрын

Glad you got it working and thanks for the positive comment!

@BlondieSL 6 ай бұрын

So here's what's confusing on this. We have the same, 2016 CRV AWD and I bought the Honda brake fluid so that I could do the change. We have a neighbor who is a mechanic. He's offered to do it for me for a really inexpensive price. He's a very good mechanic. He knows that I don't like getting under the vehicle anymore. But here's the confusing part. I mentioned that I was going to do this, the way this vid shows. But he said this is not "recommended" because the ABS pump has brake fluid in it and that needs to be changed as well. He mentioned "flush", using a machine. Has anyone else had the full system flushed, including the ABS pump?

@andysbusadventures 6 ай бұрын

Thanks for watching and commenting. I am looking forward to hearing what other CRV owner's have experienced.

@gildysico641 6 ай бұрын

Thanks for this great video! We recently bought a new to us 5th Gen T4R, and added this remote start kit. As others have said much better than the one on the Start-X website.

@andysbusadventures 6 ай бұрын

Thanks! Congrats on your 4Runner and I am sure you will enjoy the remote starter!

@shishkabobmiller2693 6 ай бұрын

THANK YOU!! The programming instructions with my unit were incorrect. Yours worked perfectly!

@andysbusadventures 6 ай бұрын

You are welcome! Enjoy your remote starter and thanks for taking time to comment.

@davefial3668 7 ай бұрын

More details on how to mount. Better/more ways to gain access, mainly for mounting. And best place to put ignition plug is needed.

@andysbusadventures 7 ай бұрын

Thanks for watching and commenting. To mount, check out 3:50 in the video. As for gaining access, it is tight and I am not sure there is any best way to get more room. And check out this video and see if it give you a better idea about mounting the ignition plug. kzfaq.info/get/bejne/brFpp5ybzN7JiYU.html Best of luck with your install. It will be worth it in the end.

@The76TBone 7 ай бұрын

Great video. Used this to compensate where the manufacturer's video didn't explain things well. I'll add that pressing the brake before turning the key after remote starting will kill the motor. That will take some behavior changes as I usually press the brake before anything.

@andysbusadventures 7 ай бұрын

Thanks for the comment and for watching. Glad it helped. Good point about the brake pedal! I still press the brake as soon as I get in and shut the 4Runner down after remote starting.

@The76TBone 7 ай бұрын

@@andysbusadventures on purpose or out of habit?

@andysbusadventures 7 ай бұрын

@@The76TBone out of habit.

@ruckinehround6965 8 ай бұрын

That skid plate putting back on is the worst part of the 4 runner oil change.

@andysbusadventures 7 ай бұрын

I agree. Thanks for watching!

@keeganbuilds 8 ай бұрын

So good! Only suggestion I’d make is mounting the unit after you program, haha I had to unzip tie to press the button

@andysbusadventures 7 ай бұрын

Thanks! Great suggestion as well.

@rudralaljit5770 8 ай бұрын

Whats the range? Distance

@andysbusadventures 8 ай бұрын

It is the same range you have when you lock or unlock your 4Runner.

@ejshelby5460 9 ай бұрын

So the kdss function was not affected by the slightly higher front? in the same vein, you could also do a longer/taller old man emu spring to lift the rear right? This same principle would work for GX460?

@andysbusadventures 9 ай бұрын

I have put 50,000 miles on my 4runner with and the KDSS has not been negatively impacted. I would assume it would work with the GX460 and I would assume you would be able to go taller in the rear as well, but I do not have any experience with this. Thanks for the comment and good luck!

@brianhely3910 10 ай бұрын

For realigning the new strut, only problem for me at least, when you say use muscles, I don't have any

@andysbusadventures 10 ай бұрын

Set a S.M.A.R.T. goal and work towards it.

@daves485 Жыл бұрын

I put the 5100s on my 4 runner, I noticed the driver’s side was just slightly lower, I called Bilstein and they said I should have used the 6112s which has an adjustment just for that reason! I ended up using a small spacer to get it perfect. The other problem with Bilstein is once you set the adjustment ring you are committed! My son went with Eibach shocks, we were able to change the stance without removing the shock, just by turning a spanner wrench. Just FYI your your installation was spot on, easy to fallow and very professional. Great work!

@andysbusadventures Жыл бұрын

I appreciate the compliments. Also, thanks for sharing your experience and hopefully that helps others make an informed decision for their situation.

@monkeypolice3048 Жыл бұрын

Why do Toyota use the filter oil change instead of the canister?

@andysbusadventures Жыл бұрын

Good question. Here are my theories: 1. Less waste per oil change and saving the environment. 2. Better filtration than the canister. 3. Make it tricky so the DIY's take their car to the dealership. 4. Make their owners feel like they are driving an exotic car or race car (this is me) I have no idea but I am sure someone out there knows and hopefully they chime in. Thanks for watching and taking the time to comment.

@kennyomega6795 Жыл бұрын

i’m scared to change my own oil, but this video gave me confidence!! changed my oil less than 30 mins!

@andysbusadventures Жыл бұрын

That is awesome! Good work. Thanks for taking time to comment.

@josephssocialmedia3162 Жыл бұрын

Opening scenes look like Great Smoky Mountains National Park (Clingman's Dome)

@andysbusadventures Жыл бұрын

You are correct! Impressive.

@HonNey-xi4ef Жыл бұрын

Did you jack up your crv or you just crawl on it?

@BeaverDunker Жыл бұрын

If you watched the video at 3:56 you clearly see the tires on the ground and him slid under the car... So he did it while it was on the ground

@andysbusadventures Жыл бұрын

I did not jack up our CRV. Thanks for watching and commenting!

@andysbusadventures Жыл бұрын

@@BeaverDunker You are correct! Thanks for watching.

@srichard6237 Жыл бұрын

I may need a bigger bike rack

@andysbusadventures Жыл бұрын

Me too!

@cloudchaser9951 Жыл бұрын

Hi. so i noticed my brake pedal a bit stiff after i refilled my brake fluids but did not bleed the brakes. Would this be the main cause of a stiff brake pedal? the brake booster seems fine though. Thanks

@andysbusadventures Жыл бұрын

Not a mechanic but here are a few things that came to mind. If you did not change your fluid but only topped it off, it may be time to refill with all new fluid. I would also check your brake booster and check for vacuum leaks in general. Lastly, is there a possibility that you put in too much fluid? Just a thought. Best of luck and if all else fails, find a trusted mechanic. I appreciate you watching and I wish I could be more help.

@cloudchaser9951 Жыл бұрын

@@andysbusadventures Thanks for the reply im trying to eliminate the causes rotor pads new 2.5 years along with the brake pads brake booster works calipers at 90000kms 2 months ago i poured in brake fluid when it was super low. I could see a bit of black deposits where the brake fluid sits havent done a brake flush in awhile anyway ive booked my mechanic, ill update ya the main causes. 😅

@andysbusadventures Жыл бұрын

@@cloudchaser9951 Good luck and let us know what the problem is. Hopefully it can help someone else in the future.

@sillybwo Жыл бұрын

Will the car start with any of the doors open?

@andysbusadventures Жыл бұрын

Yes it will. If you have a door open and hit the lock button three times, the car will "beeeeeep" while you are using the remote start but will proceed to start and lock all the shut doors. Thanks for watching and commenting!

@leddymezaimages5108 Жыл бұрын

is there a way for the stop and marker light no to turn on when remote starting the car?

@andysbusadventures Жыл бұрын

Great question. I do not have the answer to that but I assume Start-X may be able to help or someone else may chime in with the answer. Thanks for watching.

@zackmarshall483 5 ай бұрын

It might be possible to use Techstream to disable the lights but I have not tested this theory. Just know it will most likely turn the marker lights off for any and all key fob use

@alejandrobaez6301 Жыл бұрын

super easy, great video.

@andysbusadventures Жыл бұрын

Thank you!

@restinpeacesmokey48 Жыл бұрын

Simple, and quick. Why cant all tutorials be like this

@andysbusadventures Жыл бұрын

I agree! Thanks for watching and taking time to comment.

@howardtendler9213 Жыл бұрын

How did you get to the water level?

@andysbusadventures Жыл бұрын

I did a little off-trail exploring near the overlook. Best of luck and enjoy your hiking.

@brianhely3910 Жыл бұрын

This is not approved footwear for the bike repair workshop setting

@andysbusadventures Жыл бұрын

They are steel toe crocks issued by Park Tool...

@rhill6053 Жыл бұрын

@andybusadventures9249 I installed the start x but cant program it. the led light never turns green. ive tried a bunch of things including resetting the module. Any ideas?

@andysbusadventures Жыл бұрын

I would go back and make sure all the connections are in place and seated fully. Then try again. If that does not work, call or email Start-X. I am sure they will send you a new module quickly and I assume that will fix your issue. Good luck! Let us know how you make out!

@andysbusadventures Жыл бұрын

I would also double check you have the correct remote starter. If you have a key, you need the one made for key start and if you have a push start, you need a push start remote starter. There is a little sticker on the box that should tell you.

@rhill6053 Жыл бұрын

@@andysbusadventures start x and I have been in touch via email all day. They asked for info and gave me some tips to try to no avail. They are sending a new module. Great customer service. Happy new year!!

@andysbusadventures Жыл бұрын

@@rhill6053 Glad you found a solution. Happy New Year!

@redbullburtonanon Жыл бұрын

How the heck did you fit the steering column cover back over the wires?? A video of that would be the most helpful since I’m finding it to be the most challenging part

@andysbusadventures Жыл бұрын

I will look through my old footage to see what I have that may be able to help you. But if I recall, coil the wires tightly together and use zip ties to keep the wires tight against the existing wires so the cover fits. Thanks for watching and best of luck.

@andysbusadventures Жыл бұрын

kzfaq.info/get/bejne/brFpp5ybzN7JiYU.html Hopefully this helps! Good luck.

@layydback Жыл бұрын

Even after watching the follow up video I had to end up grinding away some of the excess plastic on the bottom cover. There’s little square patterns inside that’s not needed and stops it from closing

@andysbusadventures Жыл бұрын

@@layydback Thanks for sharing your solution! Hopefully it helps someone else out there with the same problem. Thanks for watching and commenting.

@thaicorp Жыл бұрын

I like your method where you don't have to jack up the car and remove the wheel.

@andysbusadventures Жыл бұрын

Thanks! Me too! Appreciate the comment.

@sailfishoneday2145 Жыл бұрын

Great detailed vid ... but one thing is u can NOT tighten those cam bolts on the lower controll arm until the truck is sitting on the ground with wheels on or u are binding/ limiting the travel . Make sure u tell ur alignment tech they need to be completely loosened and tightened again .

@andysbusadventures Жыл бұрын

Thanks for the comment and thanks for the information which will help others when doing this job. My alignment shop always does a thorough job and after 25,000 miles, I have no complaints or issues.

@sailfishoneday2145 Жыл бұрын

@@andysbusadventures no prob , it's not that ur alignment would be off if ur cams are back in same position its that ur locking in that controll arm bushing at the lowest position , all the travel from LCA comes from that rubber bushings movement and if it's locked down when arm is fully extended ur limiting ur travel and fighting ur shock ... hard to explain but if u look it up u will see .

@andysbusadventures Жыл бұрын

@@sailfishoneday2145 This is great information for anyone doing this. I really appreciate the heads up on this. I pinned your comment in case this is/was confusing for anyone watching. Thanks again!

@coryczorna8767 Жыл бұрын

I currently have iDatalink Maestro Radio Replacement installed in my vehicle, and connected to OBDII. Will there be any conflict if I add this remote start module?

@andysbusadventures Жыл бұрын

I am not sure. My 4Runner is using the stock radio. My suggestion is to call the company who made the radio replacement or Start-X. Best of luck and hopefully you can install one without any issues, it's a great addition!

@jackmayson8663 Жыл бұрын

I just did this install with a maestro radio and it works.

@andysbusadventures Жыл бұрын

@@jackmayson8663 Thanks for replying and helping out others.