Thank you sir! Very kind of you. All the best....

I guess it depends on what school your from. I can't say I agree with you that they "suck" in the woods but are more challenging than modern 4-strokes. Secondly I will take a manual clutch over a CVT belt system any day. I for sure about this as I have both types. Thanks for watching and thanks for the comment!

It really is super fun to ride! Its even more fun with all of the parts I install over the years. With that said my YFZ450r is definitely more refined and never temperamental to the conditions like the banshee. On the other hand the banshee is simple and the 450 complex. The 450 gets no attention and the Banshee get's it all! Thanks for watching!

That wire is designed to be a brake light switch. You can simply leave it disconnected or remove the switch itself.

Unfortunately I can't say for sure as I'm not familiar with the 660 setup. Does the 660 use a single piston brake caliper?

So I looked it up. The stock Raptor 660 caliper is the same caliper as a stock Banshee caliper. That means this upgrade will work for you also!

BIG 3 means - Intake , exhaust and a fuel management system upgrade. These 3 things alone will unlock your quads true potential as the factory intended. Because of EPA restrictions these quads are sent out in kitten mode but can be turned into a lion with the BIG 3!

@@350iroc9 I’m going to do these upgrades before I build the motor thanks a lot

Yes Wayne National Forest!

Yes I have the stock ITP Holeshot tires still on there. They are really good in the mud and super good on the street.

LOL I'm sure! Where did all that infrastructure money go? I actually just got back from this same ride location and currently it's a mess. When this video was filmed it was the best it's ever been there. They claim there is no funding to fix the trails this year. Thanks for watching!

This is the Pocahontas Trail System. Here is a link to it: trailsheaven.com/plan-your-trip/choose-a-trail/pocahontas/

So how did she run?

I was able to get to 76 MPH and ran out of room.

And also how does it handle in glamis? Especially me being a big dude im heavy set you think the banshee could pull me around or should i go with the 450

If you are heavy set then 450 all day is the best option. The Banshee in Glamis really has to work with a big fella piloting it. They will boil easily with aggressive sand paddles. The 450 is so much easier to ride in the dunes and gets twice the gas mileage. I've had zero issues in my 65 hours of operation with the 450. In fact the only reason I have it is because I burned up my Banshee's electrical system in Glamis because it got too hot. If you have never owned a Banshee before then just skip it honestly. They are way too expensive now. Spend your time riding and not working on it all the time is my recommendation. You won't be disappointed with a 450. I also think the 450 is a better quad than the Raptor if you were considering it.

Thank you Mr. Roberts!

It is relaxing and smooth

I remember a time you couldn't give them away! These quads were about 6K new 30 Years ago.

Ported Heads 60 over pistons Phat Head with 19mm domes 28mm PWK Flat slides running 160 main and 55 pilot FMF Fatty Pipes Elka Stage 3 all around with Elka Link system +1 +2 Alba A-Arms Lone Star +0 swing arm Dominator axle YFZ450 Front brake conversion South Texas nose mount harness that relocates the CDI, rectifier and coolant bottle to the nose. That I think is all the main components. Tons of incidentals not worth mentioning. Thanks for watching!

Yes thank you! Here is another from the other side! kzfaq.info/get/bejne/rptjhZR7xJrIqnU.html

I have a 95. You can use the 07 YFZ calipers no problem. Make sure to also use the 07 master cylinder because it has more fluid volume. Additionally you can use your current Banshee brake lines since the banjo bolt is the same. This is a GOOD upgrade and wish I would of done it earlier! The front tires will lock up now if I want!

Well there is only one way to find out - ask him..Push him a bit and afterwards he will thank you! Thanks for watching and hope you can get back out there!

YES! Thank you for watching!

Mantap is an Indonesian word which means “Excellent.” Thank You!

salam dari indonesia bang @@350iroc9

Hi there! I purchased mine from Rocky Mountain ATV/MC. To start I decided to only purchase the fronts to make sure they fit. As you already know there is limited information/options on this subject. Don't bother contacting Elka as they don't produce anything for our year. The fronts I purchased are from the 2023 XXC 1000R parts list. They are called FOX 1.5 PODIUM RC2. The shock bodies are sold separately from the springs. In my case and because I wasn't sure I also purchased the springs to be safe. In hind sight I didn't need to as they are the same springs used on the stock FOX shocks as a FYI. Here is a link to the OEM parts finder: www.rockymountainatvmc.com/oem-schematic/10 Drill down to Can-AM > ATV> 2023> ATV-North America-Renegade-Series> Renegade 1000R EFI - XXC - North America The Can-AM part number is 706203208 for the fronts and 706004492 for the rears.

Hi there and thank you for the question. The ride park I was testing at is mainly sand so the tires would only spin. Honestly this was only the third ride for me on this machine. During the initial break in weekend it was raining and mud for miles so again limited traction. Right out of the gate I ordered the HMF exhaust system with the Power Vision 3 tuner. Both of these upgrades helped but I still needed more. The QSC REV-X primary clutch is a bit spendy at $1200 but quickly became the flagship upgrade. Now the power spools up like "right now"! My riding background is with sport quads and are my primary machines in select areas. The CVT 4x4 platform is new to me still. My reasoning/vision for purchasing this machine is to branch out and explore more riding areas that I wouldn't consider before. Sport Quads are no fun in heavy mud and water because you simply can't keep your goggles clean to see. If you can't see then spin the wheel of pain. Endless large rock trails will not only destroy a Sport Quad but will also knock the fillings out of your teeth. Already with the small amount of time I've had to enjoy the Renegade I've gone further longer than my other machines. This suggests that my plan is working but its like living in two very different worlds. 800lbs is not 400lbs and you know it on these. Lastly congratulations on your purchase! There's nothing like bringing home something new that you can get into and make it your own. Keep in touch because if you reside in the US I'm sure you've noticed the 650 Renegade is a bit of a Unicorn.

@@350iroc9 well thanks for the reply. Yeah it's hard to find any reviews or people that have them. I've only seen one in my area. It seemed fast and sounded amazing your bike seems to rip as well I really like the Renegade much like u i like the sport look. I guess I'll find out next week. If it doesn't snow before then. Cheers!!

I took a look at your channel and it appears your dirt bike rider! I also ran dirt bikes in my earlier days retiring on a 1989 CR250. So for you (i'm assuming here) it will be nice to have both 2 wheels and 4. Remember the snow doesn't matter anymore as these things plow through anything! I also wanted to mention that as your read the limited information, many people are worried about the lack of power steering. Not only would that add more weight it would add more $$. You simply don't need it and in my opinion will make you soft. This quad steers like any other if not easier due to the larger tire size and increased ground clearance. I can see its place on a XMR navigating the skag with giant tires but its a luxury. Your dirt bike doesn't have any storage so why would you need any now? You don't and is what backpacks are for. I think your really going to like the new couch on wheels lifestyle...

@@350iroc9 Yeah I just wanted a change of pace honestly alot of the people I ride with have ATVs and we have miles of trails that are definitely not dirt bike friendly. I have been on a 21 Renegade 1000xxc but honestly it's alot of money and for riding trails it's a lot of bike. Where I live in Canada the the 1000 is 23 grand after taxes. Absolutely insane lol.

$23,000! that's out of control. The 1000 is $16,000 and the 650 is around $10,000 around here.

WoW thank you that's very kind of you! Do you have anything to ride now after the 570? If not its time to get back out there! ATV's are my hobby and wish I could ride everyday. I was able to get this unit at a reasonable price using the Can-Am end of year rebate. If life allows then this is the time to get in! I'm just going back through everything to make sure everything is still tight and promise afterwards to make that walk around for you.

@@350iroc9 I don’t but I’m in a better place now might have to get back into it! Can’t wait for the walk around!

So I already had aftermarket braided brake lines installed due to the +2 +1 A-arms requiring the lines to be longer. You can certainly use the stock brake lines as the banjo bolts are exactly the same. This upgrade is worth every penny and wish I would of done it long ago. You can literally lock up the front tires on command with one finger yet are very precise as needed.

I absolutely love my 450! Yesterday I was riding my buddies 2020 Raptor and I'm glad I went the 450 route. The only down side is the amount of money I needed to sink into it from stock. The stock exhaust sounds like a sewing machine. Once you upgrade the exhaust now you need some form of fuel programmer. Next the AIS emissions has to go and its up to you if you want an intake. After its all said and done its an absolutely amazing machine! You can drive it fast or you can drive it slow - it doesn't care. It has tons of power and is easy to drive yet is very good on gas consumption. I have a hour meter and after 3 years of ownership and 65 operating hours nothing has worn out. Yamaha's build quality is second to none and couldn't be happier with it. I hope that answers your question and thank you for watching!

I took my quad to BNR Motorsports in Lima Ohio and they flashed my Vortex with a custom map on their Dyno. The cost was $300 and worth it to make sure I was in the healthy range regarding Air/Fuel.

Hi there and thank you for the comment. I can not say I've been there before and honestly wasn't aware of it. Now that you have brought it to my attention I did mark it on the map and will make an effort to visit this place so thank you!

You can use any years from 2007 to current for the Master Cylinder and calipers. The 2006 and earlier were different. Master Cylinder Part# 5D3-2583T-02-00 Front Caliper (Right) Part# 5TG-2580U-12-00 Front Caliper (Left) Part# 5TG-2580T-12-00 I used the 07 and 08 because that is what I had. As a follow up this brake upgrade is 1000% better stopping power than stock and highly recommend it! Thanks for watching!

Hi guys. Great info. Please help... Will the 07 and up calipers fit on a 06 banshee?

What year banshees are you guys referring to?

I definitely agree as there is nothing like it! I can't even tell you the amount of people that approach me because of this quad. It seems like everyone has a story to tell from back in the day its absolutely amazing! Thank you for watching and thank you for the comment!

Honest to God right! 🙄

I think those were M8 16mm - 18mm button head bolts. I just used whatever was in my spare bolt bin. You would need two people to do the rivet method because the box is so slippery and odd shaped.

@@350iroc9 Awesome...thank you for the response. Much appreciated.

Thank you for watching Keith!

That is interesting but not even close. These are once again in southern Ohio.

@@350iroc9 yes I know. That's why i said kinda. The national forest on the AR/OK area is very similar 😀

You can find the cutout at EHS Racing

@@350iroc9 THANK YOU!!!