Whatever that is it's going to be a beast that looks insane
@rynks_rc8 сағат бұрын
I hope so. Going to try and fire it up sometime this week. Hope all goes well
@lotuse420Күн бұрын
i wanna play hobao tmaxx
@rynks_rcКүн бұрын
Sounds good. You’re in
@kanenstuff2 күн бұрын
I would love to put my LRP .32 in my Hobao Hyper SS. Though tomorrow I go to Japan for work for 2 weeks. To everyone joining have fun and will be watching if I can.
@rynks_rc2 күн бұрын
I’m not starting it till August first. You have time. Put it together and join in
@kanenstuff2 күн бұрын
@@rynks_rc yes I would have a week or so, but I'm an expat in Malaysia and my sister is coming August 2nd. Then we're off to Langkawi and Thailand Phuket to show her around Asia so no time in August.
@rynks_rc2 күн бұрын
@@kanenstuff sounds like a good time either way. Have fun
@Fullsenditrc2 күн бұрын
Love it my brother can’t wait to see what numbers everyone puts up
@rynks_rc2 күн бұрын
Me 2 I’m going to try a test run tomorrow. I have some parts to try out but need a test hit
@Fullsenditrc2 күн бұрын
@@rynks_rc good luck my friend I have to play around with my setup also my wheels are super heavy lol
@michaelgraham29432 күн бұрын
I have the baddest small Block around 😁✌️
@rynks_rc2 күн бұрын
We will just see about that
@michaelgraham29432 күн бұрын
Just ordered a dynamite speed meter 2.0 ✌️
@rynks_rc2 күн бұрын
Getting serious
@haywirerc2 күн бұрын
I used Speedometer Simple on my phone to do my tests and tune and is accurate for top speeds. I tested it while riding in my car and is 100% spot on. Flaw is it doesn’t pick up acceleration well and takes a second for it to register on the speedometer.
@rynks_rc2 күн бұрын
Just hope your phone don’t get involved in a high speed monster truck crash.
@haywirerc2 күн бұрын
@@rynks_rcno airbags!
@ofnaguycarlwatts86022 күн бұрын
Hey Bud You talking about maps GPS on your phone?? I thought about that myself but how do you see top speed. Or could you send me a link to what you're using.thx in advance 👊👊
@haywirerc2 күн бұрын
@@ofnaguycarlwatts8602 it’s in the settings and trip history
@haywirerc2 күн бұрын
I was out today testing and tuning. LST did well today. Won’t be revealing any secrets sorry😂
@rynks_rc2 күн бұрын
Leaving is hanging lol
@michaelgraham29432 күн бұрын
First I heard about this I will be running the TMAXX
@rynks_rc2 күн бұрын
Excellent I will add you to the list. Good luck
@michaelgraham29432 күн бұрын
Awesome 👍
@rynks_rc2 күн бұрын
Thanks
@Fullsenditrc3 күн бұрын
I just did a little speed test with my mammoth !!!
@rynks_rc3 күн бұрын
I have to get on the ball with that. Been playing with my arrma felony and neglecting everything else
@Fullsenditrc3 күн бұрын
@@rynks_rc I hear you bro it’s hard to concentrate on one rc at a time
@rynks_rc3 күн бұрын
@@Fullsenditrc 1 have 1 half built 3 on the back burner and probably 25 others in the mix somewhere
@Fullsenditrc3 күн бұрын
@@rynks_rc typical life of the rc enthusiast I feel your pain brother the projects never end
@Fullsenditrc3 күн бұрын
thing is moving bro !
@rynks_rc2 күн бұрын
It holds its own I’m happy with it
@Fullsenditrc2 күн бұрын
@@rynks_rc was moving pretty good bro 👊
@Fullsenditrc3 күн бұрын
i didnt even know that a t15 even came in the mt2 cool info brother !!!
@rynks_rc2 күн бұрын
Yea and it ran pretty good with it. Unfortunately it will need a repinch
@Fullsenditrc2 күн бұрын
@@rynks_rc sometimes it happens at least it’s still able to be saved
@rcnitroflux23613 күн бұрын
I got couple them motors bud any other people doing speed challenge
@rynks_rc3 күн бұрын
Only a few officially a few others showing interest I’m going to post an update soon
@rcnitroflux23613 күн бұрын
@@rynks_rc should join nitrogang Facebook page post there bud I can send you invite if want bud
@rynks_rc3 күн бұрын
@@rcnitroflux2361 I think I am
@haywirerc4 күн бұрын
That’s super clean!
@rynks_rc3 күн бұрын
The whole mgt it came with should clean up about the same. Scored on this one
@lotuse4205 күн бұрын
i think those are supposed to stay on the car nice truck
@rynks_rc5 күн бұрын
You would think. If you can’t trust a 20+ year old nylock what can you trust lol
@Nitro_rc_life6 күн бұрын
If you wanna keep it roto you can use a tiger drive. Just make sure you biy the correct one
@rynks_rc6 күн бұрын
I don’t mind the pull starts to be honest. One less thing to carry around
@Nitro_rc_life6 күн бұрын
Hey man 300 subs congrats 👏
@rynks_rc6 күн бұрын
Thanks dude
@michaelgraham29437 күн бұрын
Excellent it's running really nice 👍
@rynks_rc7 күн бұрын
Not bad for a little small block.
@allaspectsrc41787 күн бұрын
Nice...
@rynks_rc7 күн бұрын
Pretty awesome little truck. Would love to see a modern version
@allaspectsrc41787 күн бұрын
Nice!!!!
@rynks_rc7 күн бұрын
Going to pull the engine out later in the week and clean it up. Found a pull start assembly for it. Should be a runner
@haywirerc7 күн бұрын
Big boys jump too!
@rynks_rc7 күн бұрын
Wish the grass was lower so I could get more speed out of it. That buggy rips
@haywirerc8 күн бұрын
Awesome truck
@rynks_rc8 күн бұрын
Got lucky and found a full starter assembly brand new. Got unlucky and had to pay a premium for it…
@atkracing8 күн бұрын
Run 30wt oil in the shocks
@rynks_rc8 күн бұрын
I was thinking somewhere in the ball park of that considering there’s 8 of them
@rcnitroflux236110 күн бұрын
I'm in for speed run challenge shout me out on your channel bud if want I'm running Savage xl 5.9
@rynks_rc8 күн бұрын
Will do thanks for joining in
@Nitro_rc_life14 күн бұрын
Throw in some skin lol that's funny
@rynks_rc14 күн бұрын
Gotta make it worth while. Lol
@Nitro_rc_life14 күн бұрын
@@rynks_rc it just cracked me up
@Chino-vn3ot14 күн бұрын
I wonder who that guy with the 30 trucks with big blocks is 🤔 Lmao
@rynks_rc14 күн бұрын
Some chino buster lol
@Chino-vn3ot14 күн бұрын
@@rynks_rc so you one of them too huh Good to know
@rynks_rc14 күн бұрын
@@Chino-vn3ot o I love bustin balls lol so what’s up you still in?
@haywirerc14 күн бұрын
HelLST is in!
@rynks_rc14 күн бұрын
Hell yea
@loganclark560415 күн бұрын
I will say straight outta the box with mine was a let down but a complete surprise when I started testin it
@rynks_rc15 күн бұрын
I haven’t really used it since. I will eventually start modifying it just haven’t yet
@loganclark560415 күн бұрын
Be lookin to spend some money
@rynks_rc4 күн бұрын
I did spend some money… I replaced the battery’s I stole out of the remote
@wraithmedaberry579516 күн бұрын
I found it tricky to drive if you are used to a normal 2wd slash, body puts a lot of weight over the rear end and it makes for a very understeery drive. Definitely an interesting vehicle out of the box
@rynks_rc16 күн бұрын
Which makes me wonder how well it would be on a clay oval. When I set up my street stock it’s a lot of rear toe and tail happy this thing just likes to push
@josephsaucedo869120 күн бұрын
Red locktight not going to work because of the heat that's how you remove parts when they have red lock tight. You would have to use lock washers to keep it from backing off. 💯✌️
@rynks_rc20 күн бұрын
I’m going to get longer bolts and run them backwards and use nylock nuts on the side away from the exhaust with a lock washer. If it comes off after that I’m welding it lol
@josephsaucedo869121 күн бұрын
That looks like its a 4.6 engine savage x first gen block and they changed the cooling head and pull start parts its a 21 body but a lot of the parts are savage x from the first gen x wich is basically a 21/25 savage with some factory upgrades. The savage x model after the first gen is what most people are use to seeing with the x on the side plate and a couple of visual factory changes 💯👍✌️💪 there quite a few savage x models unfortunately they didn't alter the name so any one could tell the difference between them besides the new savage x gt6 wich is basically the same thing with factory changes/a few factory grades. 💯👍✌️🤭😉
@rynks_rc21 күн бұрын
The engine is a .32 axial. This truck is a total mutt. Thanks for checking it out
@josephsaucedo869121 күн бұрын
That's a savage x first gen model I can tell there no x on the side of the plates and it has the purple base borders😉
@josephsaucedo869121 күн бұрын
For upgrade diff you would be looking for savage x bullet proof diffs you can use the new savage x parts as stock upgrade parts as a upgrade. A hpi trophy header as a upgrade over the stock. To get out any dents in the muffler pipe put water in it and stick it in the freezer . Savage nation 💯👍✌️💪😉
@Chino-vn3ot22 күн бұрын
I respect what you tryna do but you gotta realize a lot of people on KZfaq don’t even know what they doing. Most people depend on other vids on how to tune lol, I know I might come out like a hater… But that’s the truth, I got $100 or whatever on my stock LST XXL against any nitro MT
@rynks_rc21 күн бұрын
In the words of the late/great macho man Randy savage “the cream will rise to the top” lol
@Chino-vn3ot22 күн бұрын
I’m Down, let me know
@rynks_rc21 күн бұрын
Stay tuned I will make a video later next week
@allaspectsrc417822 күн бұрын
Nice!!!
@haywirerc22 күн бұрын
I think it should be by class. Have a savage class, tmaxx class, LST class, etc. or just small block and a big block class
@rynks_rc22 күн бұрын
My pockets ain’t deep enough to break it down that far. Kinda wanted truck choose to be very open so a lot more people would have something they could use.
@haywirerc22 күн бұрын
@@rynks_rcmakes sense. Let the best Truck win!
@allaspectsrc417822 күн бұрын
I'm thinking I'm in I'll post the truck I may want to enter great idea by the way ..by class or make ain't a bad idea but if u want a group of bad ass trucks to inter ..all out is probably the way to go ..love what u are doing with your savage its going to be a animal with that. 32 and carbon fiber chassis..
@rynks_rc22 күн бұрын
@@allaspectsrc4178 run what ya brung is what I was thinking. Just hope for a good variety
@Chino-vn3ot22 күн бұрын
I got a stock LST XXL available to compete, no dusty ass rc sitting there while people talk in the background, let’s do it run wut you brung, I’m all stock, compete against any Nitro Mt Stock LST XXL
@haywirerc22 күн бұрын
I gotta get a GPS now😂 good idea with the monster trucks.
@rynks_rc22 күн бұрын
Can I count you in then? Spread the word
@haywirerc22 күн бұрын
@@rynks_rc not yet until I buy a GPS but I’ll let my followers know
@haywirerc22 күн бұрын
@@rynks_rcI didn’t realize how expensive the dynamite ones are. I’ll let you know by next week if I get it. Also I’ll take any cheaper option if u used other brands that are accurate.
@rynks_rc22 күн бұрын
@@haywirerc the gnss gps that works off an app on your phone is hands down the way to go. The cheaper version which I have that reads off the actual gps sucks.
@kanenstuff22 күн бұрын
46 thats a great speed is impressive for brushed. Do a full steering links and servo saver kit, steel ball ends for the front arms, servo mount and it will make it run straight and take the tamiya slop out. I like the Tamiya but I will never be a big fan as there cheap but to have a proper running car it cost too much. P.S shock are a big difference not so bouncy but doing well 👏
@rynks_rc22 күн бұрын
It definitely needs some upgrades in the steering and shock department. The only reason I haven’t done any of it was I want to see as speed increases what parts fail first. I was told the driveshaft wouldn’t last and it’s still hanging on. Lol once a part fails or just makes it impossible to drive I will change it. Also hit 48mph last time out against the Redcat lightning
@kanenstuff22 күн бұрын
Can you dremel the mount or make them closer to a 1 to 1 ratio. I'm off to Japan next month for work and going to Super Rajikon. Going buying a Hitec 50th Annivery 10.5T brushless motor and a bunch of stuff as it's duty free.
@rynks_rc22 күн бұрын
I’m sure room could be made but I don’t want to have to cut into the chassis. It 45/49 now I believe and should be more than enough gearing once I swap it to a brushless higher kv setup and 3s
@kanenstuff22 күн бұрын
I never use Tamiya screws I just go hex hardware, which is not good as I invented in the Tamiya screw driver kit and wil never use it ha.
@rynks_rc22 күн бұрын
Whenever I go through any older nitro cars or trucks that have the Phillips head screws I buy the stainless hex hardware kits. Not a fan of that hardware ether
@kanenstuff22 күн бұрын
@rynks_rc high tensile stainless steel or 12.9 hardness steel is always good. I don't use aluminum screws, though they look nice with the colours they strip too easy and over priced.
@rynks_rc22 күн бұрын
@@kanenstuff I buy the kits from RC screws. There alittle soft if you go hard on them but for under $40 you can’t go wrong and the amount of extras they throw in really go a long way
@kanenstuff22 күн бұрын
@rynks_rc that's good I'm an Australian working in Malaysia we have great quality stuff. A hex kit is 30 MYR or 30 AUD for 200pcs for and assorted pac so it's a bit of bargain like our 40 cents per litre petrol/gas.
@michaelgraham294324 күн бұрын
Nice 👍
@GODLIKEZ49026 күн бұрын
32
@rynks_rc26 күн бұрын
Yup
@Nitro_rc_life26 күн бұрын
Stay tuned I think I know what's wrong with your little car I will release my shifting problem video soon
@rynks_rc26 күн бұрын
Will do I bought a new clutch for it since they were like $9 shipped and want to see if the old one is just worn out.
@Nitro_rc_life26 күн бұрын
@rynks_rc I don't think it's the clutch I'm almost positive it's the springs catching on the screw so the shoe can't separate and grab the outer clutchbell.
@rynks_rc26 күн бұрын
@@Nitro_rc_life interesting theory. I’m going to disassemble the old one and see what I find since I have a new spare if I damage it. What I have noticed is it tends to stick closed at times. I think it’s retracting more than it’s ment to
@Nitro_rc_life26 күн бұрын
@@rynks_rc yup exactly
@RCDUSSE27 күн бұрын
I love some revo action I have 3 hahaha you’re so true about getting out and breaking something else. It’s a continuous rinse and repeat. I haven’t even been back in the hobby for three months and I have 11 cars now.
@rynks_rc27 күн бұрын
The revo is a great platform I have 2 of them. Never fails tho I bring 4 cars and 2 work 100% the others not so much lol
@RCDUSSE27 күн бұрын
@@rynks_rc tell me about it, brother I’m going to attempt 50mph with my e revo mini let’s see what I break or crash 💥 hahaha 😂
@rynks_rc27 күн бұрын
@@RCDUSSE good luck brother good luck
@haywirerc27 күн бұрын
Back from the dead!
@rynks_rc27 күн бұрын
It’s missing a few things and needs a cleaning real bad but it will live again