4 жыл бұрын
4 жыл бұрын
4 жыл бұрын
5 жыл бұрын
5 жыл бұрын
5 жыл бұрын
5 жыл бұрын
5 жыл бұрын
5 жыл бұрын
5 жыл бұрын
Пікірлер
@pk2959 3 күн бұрын
Cheers man 👁️😄 happy days
@VDtranXX 11 күн бұрын
need some new videos! 2024 still here
@kebyen 14 күн бұрын
Do you order a shim kit specific for Kawasaki versys 650. Or do you order the shims individually?? Could you please add the link Thank you
@MechitBetter 13 күн бұрын
Hi, The outer diameter for the versys shims is 7.48mm. You can buy specific kits for the bike which includes a whole bunch of different thicknesses to cover a wide range of adjustments or you can buy separately. It's obviously a bigger investment to buy a full kit but then you're probably covered for all eventualities before you even strip the bike down to check. At that point you can replace them straight away and reassemble. If you can survive without the bike for a while, do the check and then order the specific ones you need. Just be very sure you're measurements are correct. We we're lucky that the guys at NYAB (where we did the video) already had stock available to use onsite and we didn't have to order any. A company I have previously used for bike parts is Wemoto. They do list shims for the versys. Hope that helps
@ballsack4321 21 күн бұрын
Really well done lads, my old Punto is waay past needing front struts plus goodness knows what else and i found this video to be brilliant, thank you 😊
@MartinJames-dw9xt Ай бұрын
Guys a Absolute LIFESAVER ❤ Thank you for taking the time to do this. Tutorial!
@anthonywhite2957 Ай бұрын
Excellent videos lads and great banter ! Confident to do these now thanks to you lads.
@MechitBetter 13 күн бұрын
Apologies for not responding sooner, especially to such a glowing comment of positivity. Much appreciated. Have you had a bash at the task? If so, how did it go?
@big-smoke-rc Ай бұрын
Great vid, thanks lads
@MartinJames-dw9xt Ай бұрын
Great tutorial, why did you replace the EGR valve? What symptoms were you having please
@genivaldoamancio2415 Ай бұрын
❤
@leemooney7048 Ай бұрын
Helpful video.nice one. 😉
@ai0318 Ай бұрын
Hi there, may i know how tall are you? I am interested in this bike but i am 189 cm tall and afraid my knee may touch front cabin when sitting down on it.
@ahsansaeed9103 2 ай бұрын
Brilliant. Wonderful. More service videos please!
@emekaclinton8273 2 ай бұрын
I have a Yamaha town mate any time I try to accelerate it will off
@androidgaming8292 2 ай бұрын
fun fact the egr valve is implemented into a car to stop the engine from melting
@Benjmensch 2 ай бұрын
what are shims? and are they the detrimental component in this? do i need to have replacement shims?
@andyjohn1971 2 ай бұрын
Did u find out what the problem was with the juddering no power up incline and dash lights flickering ???
@MotorbikeMan1965 2 ай бұрын
just got my son one of these. 2013. runs well enough for a 125. wont win any races. just 1 thing. anyone have any issues with neutral light not working? did you resolve it. ? cheers
@dustydinkelman266 2 ай бұрын
Nice video, right mindset and great music ( not as french youtuber too often ..) Thank you and goes on .!
@jaysoncolbert6187 2 ай бұрын
I got my valves readjusted in my first and last week of prison
@delyanzhelyazkov2561 2 ай бұрын
Plugs are for fog lights mate
@Constantin_08 2 ай бұрын
How do you remove the seat?
@willymagobe 2 ай бұрын
What is the name of grease used when replacing brake pads
@user-dr2js3ho3x 3 ай бұрын
Pourquoi ne pas enlever le radiateur ?
@MechitBetter 3 ай бұрын
Bonsoir. Merci pour votre question. I chose to leave the radiator attached because I had recently replaced the coolant and bled the system so I didn't want to do it again. Yes, it would be easier if it was removed but we managed anyway.
@robertguest5309 3 ай бұрын
the main difference 50 cc 3speed 80cc 4speed not very quick for an 80 had 2 from new 83 85 respective 😀👍
@steveni1459 3 ай бұрын
i have a 2012 trafic 2.0 dci with injector fault and 3 garages i took her to there code readers cant pin point whats going on .. also dpf needs cleaning out.. had her 5 years she had brand new turbo over 2 years ago love driving her but worried about high repair costs now..
@wegfdfhz 3 ай бұрын
To remove a track rod end either use a ball joint splitter or hit the arm side on to break the taper.
@user-bz8qz8ii9n 3 ай бұрын
Check the vacuum pump it may need to be replaced
@philgreen7161 3 ай бұрын
Great video,did you consider blanking/deleting the EGR? I’m having same issues as you and think I’m going to blank it
@matth620 3 ай бұрын
Great video - amazing the amount of freedom such a small scooter can give you..
@dispow93 3 ай бұрын
so nice! thank u.
@stephengrainger7586 3 ай бұрын
I was going to buy a bike like this but changing the spark plugs is a nightmare so not going to buy one now
@sailingdarren 3 ай бұрын
god i only took air box off and intercooler pipe
@cheezmartian 3 ай бұрын
You can do this without removing the "Pear" valve, just 2 bolts ontop for the pipe 8mm and the 3 securing the cover, maybe I am just a master of removing arkward parts from working on vws... ;)
@yichen4518 4 ай бұрын
Nice video! I am a car owner from Taiwan. The operation is very detailed.
@Gali7 4 ай бұрын
Perfect video congrats! Any idea why 700ml isn't enough for full level? Greetings from Greece
@MsDenver2 4 ай бұрын
You know your skittish front end , have you tried putting a heavier fork oil in?
@Made4Viol3nce 4 ай бұрын
Mechanic of over 15 years.... Suzuki strikes again. That is one of the most poorly engineered tensioners I've come across in an engine bay with plenty of room for a norman tensioner. Literally so much room at the power steering pump for a tensioner setup the same as the alt belt. Holy shit I hate Suzuki's turdbox's.
@tom1226 4 ай бұрын
thanks
@emekaclinton8273 4 ай бұрын
My Yamaha town mate is always turning off anytime I on I don't know what to do
@jacksspannersrestorations5853 4 ай бұрын
How do you remove the side panels is there any chance you can do a quick video please mate
@jackharper3190 4 ай бұрын
I CONDEMMNTHIS VIDEO! There I was yesterday in the middle of the desert 42° temperature and no shade with my Jimny and a broken alternator belt. My phone hat 11% battery left and I had problems to fit the drive belt because it was a bit too short. All I had where a set of cheap Chinese spanners which where way too short and I was running low on water since I needed some for the radiator to refill. PLEASE MARK YOUR VIDEOS CLEARLY AS SATIRE THE NEXT TIME. Thank you!
@x66Hawk66x 4 ай бұрын
I just bagged a t80 for £190 I cannot wait until I put it on the road.
@robinwells8879 5 ай бұрын
I am assuming that it’s oil cooled with a heat exchanger because the barrel and head assembly has no fins as far as I can see. Lovely little engine.
@romak0073 5 ай бұрын
Please can you tell me where the fuses are, I can not find anything online thanks.
@romak0073 5 ай бұрын
Where are the fuses on these mopeds, I can’t find anything online. Thanks.
@tombartram7384 5 ай бұрын
Thumbs up for old fashioned 1980s style clocks! Modern instrument panels are sealed units so if a single bulb goes you're knackered.
@thealvaco 5 ай бұрын
Good video guys! I put the bike in top gear to get the cams to lign up. Saves me the trouble of getting that side cover thingy off.
@1ivanfanin925 5 ай бұрын
Hey guys, thanks for this super video. You saved me!
@mehmethussein5048 5 ай бұрын
Spot lights
@HeartsForCheese 6 ай бұрын
Hi my gears are noisy after changing the oil help please???