They've been excellent sellers. Next week's vid has the two new Streamlight Wedges in blue and purple, which I was eager to see. They're a special order, so they won't be going on the shelves.

Yes, people can over-tighten, but honestly, they can over-tighten anything when they disregard the proper specs. Glad you're liking your Coast light!

Oh man I didn't know about the coast light until now. I been wanting that type of light for my pocket

If he can't upgrade you.. I can.. LOL :)

I'll take care of it. Sorry I missed you this week. I've been sick with a gross cough and can't stay awake for too long.

Good to know about the Astro grinder, Ricky, thank you, bud!

That is certainly NOT a common problem. I can't say I've ever seen it before.

Ok, thanks for responding! Do you think that would be a warranty thing?... If you go onto Amazon and read the comments, that's pretty much the only complaint, and there's definitely a few (pics in comments as well). That and the case, which I think is actually pretty good. It's not something most people would notice unless you looked for it, but when I did, there was between 5 -10 of them that were pretty crooked and not seated all the way down. I didn't think I'd find any, but I did. I like GW and love the kit, so I'd like to just swap them out if I can. There's a couple of tool places near me that carry GW sooo🤷‍♂️ I tried putting them in a vice to seat them straight, but they don't budge!

@@cblack1863 You now know first-hand why I advise people to NOT buy on Amazon. You received a defective set of tools that were most likely not purchased from the seller through a legitimate distribution channel. You can try to contact the seller and Apex Tool Group (GW's parent company) for warranty service, but it pains me to say the odds are stacked against you in getting a satisfactory resolution. This is why you should only buy from a reputable retailer who will stand behind your purchases with full after-sale service and support. Yes, you will pay more, but faced with this issue, how much would that be worth to you?

True that man, lesson learned. I did purchase from an Amazon affiliate that has a 30 day return policy. That was a couple weeks ago or so, so I'll try to return them. I'm just concerned because I saw quite a few comments stating the same thing, but I rolled the dice and shouldn't have. I also have the VIM 77 pc kit, so I'll use that in the mean time. Anyhow, thank you for taking the time to reply, I wish I had someone like yourself to purchase this brand from, but in Canada they're few and far between for GW. Thanks again for all the info, look forward to more vids:)

@@cblack1863Amazon's 30-day return policy is the one good thing about these kinds of scenarios. At least you're not stuck with it. VIM is another great brand, so I hope those will get you through. Thank you for the kind words and I appreciate you watching. Good luck!

That's the one. The most complete set I've ever seen.

I haven't heard a complaint yet. I feel very good about them.

@@CoyleTools yeah he said every one he sold his customers love them I just don’t know how they will hold up over time but kinda want to buy one from him just to try it

I like that idea. Thank you for the suggestion.

@@CoyleTools I want to do a channel devoted to that type of thing but I’m a little ways off from being ready because I’m on the road full time

Hello, George! I'm glad you enjoyed it, and you know I appreciate you!

@@CoyleTools Hello again, Lindsay Thank you for the kind words 🙏

Glad you did, Kevin. I had fun making it with him.

Kevin it was a blast interviewing Lindsay, hopefully we can do it again sometime

Thanks, buddy! I hope you're doing well.

I agree. They'll go on my next re-stock order.

@@CoyleTools keep us informed on how well they sell I’d say they will sell like the cta oil filter wrenches that ya decided to keep on the truck

You're a good son, Brandon!

You're welcome, Scott. Thanks for watching.

Will do, Mark, thank you!

Ultimately, people will buy what they think is best suited to their needs. I see my job to give them as much info as possible. And I'm happy to help them either way. Thanks for watching, bud!

You're the hex wrench king! It's great to meet someone like yourself who has experience in different fields. It brings a new perspective. Thank you for watching, Ed!

@@CoyleTools You ain't kidding. Short and long square ends, short and long ball ends, short "L" ended sets, extra long sets, Tee handled sets, hex socket sets, got 'em all. The mechanics (I was just an operator) used to hit me up when they didn't have the right configuration wrench.

Glad you found it useful, Ian, thanks for watching!

I have not seen a quality difference between the two, but my sample size is small since there aren't as many Tool Vaults in shops, but those I have seen are used by diesel techs and are heavy duty enough to hold a lot of weight and some very large tools. Hutch vs. top box is strictly preferential. It depends on whether you want to keep the top of your box as a lockable work surface or if you want the additional drawer space. If you get a hutch and find you need more drawer space later, you can always get a cart or something similar. But if you get a top box and decide you want a lockable work surface, there isn't a great option for that.

@@CoyleTools I know this is an old vid but I just saw it today. Thank you SO much for the quick reply! Appreciate the feedback about Tool Vault. For some reason I am REALLY liling the 30 inch depth (I know the drawers aren't that deep?) I think this really helps with storage issues. If the Icon was 30" deep I would probably have one by now. Love the quality that I see in the stores. Opinions on Tool Vault vs Icon quality?

@@philmcginnis2373 They seem comparable to me. Between the two brands, there are at least a half dozen I see in use everyday, and have been for at least four or five years. A couple of those for much longer. They have held up well. I don't think you can lose with either brand. With all brands of tool boxes, the best way to treat them is to keep the drawer slides clean. Dirty, gummy slides is easily the most common problem I see. It results in the ball bearings falling out and the slides sticking, requiring replacing the slides.

Believe me, I'm curious about it, too. Glad you enjoy the video, and I appreciate you watching.

The 2100 is 2100 lumens and the 2600 is 2600 lumens.

@@CoyleTools thank you, but there is no marking.

There is no way to tell the 2100 from the 2600

@@ernestaiello3605 If there's no way to tell, how do you know one is the 2100 and another is the 2600?

@@CoyleTools I received the new 2600 in the mail it is exactly the same as the 2100. Exactly. I already had two 2100 s. Wanted to upgrade. Is the box it came in shield sealed as a 2600.

Hello, George! Thank you, as always, my friend!

@CoyleTools You are most welcome my friend 😊

That's valuable feedback, Mark, thank you!

Thank you for the feedback, James. So far, I haven't heard anything negative about their scanners.

@@CoyleTools you’re welcome. I have their second from the top of the wine scan tool and I would say it’s about 3/4 of an Autel but half the price and I was able to get there software licenses extended out to 2027 for a reduced rate when I bought it, not a bad deal if you ask me. It definitely found things that other scanners that I’ve tried missed. If you don’t offer them, you should seriously think about it.

Thank you!

I am very grateful for your viewership. I'm with you about some of the other KZfaqrs. I have no desire to get into that kind of pettiness and I'd rather give you actual information than spew out speculative or opinionated content.

That’s a great attitude. One of my dearest closest friends was a master mechanic for Ford his set of tools? Harbor freight. He always told me it was never the magic wand. It’s the magician. He was a really smart man and he taught me so much. I’m really gonna miss him. if you ever encountered an SHO Taurus with the little trapdoor behind the glove box to access the spark plugs? That was his innovation.

Hello, George! You pose an excellent question that I don't know the answer to. The only jamming problem I've experienced with these is when using sub-standard ammo, the spent casing didn't eject and stove-piped, or the round didn't fire. Clearing the bad rounds was accomplished easily just by retracting the bolt. I'm glad you enjoyed the video!

You got it, George, thank you for watching!

Good thing you didn't watch the video I shot inside some duct work.

@@CoyleTools lol!

Glad you enjoyed, it, George! Thank you and Sunday will have that other gun video I promised.

@CoyleTools Thank you that sounds good to me. Again thank you 😆

You can email me with information about what you'd like to purchase. Once the purchase is complete, if you're local to my area, you can pick up your firearm in person. If not, I will ship the gun to the FFL of your choice. My email is [email protected].

I appreciate your viewership and the inquiry, but I won't speculate on a diagnosis without seeing the tool, nor will I provide a diagnosis for free.

@@CoyleTools Well, I’m sorry that I did ask and I didn’t think you would respond with that honestly. I just wanted to know if you had any suggestions that’s all I wasn’t looking for a full MD diagnosis and repair guide for it. I already took the tool apart. It just doesn’t make sense to why it’s loose. I was just asking in a friendly way that’s all I wasn’t looking to make you take up your time. Again, sorry for asking for you to do something for free. I would’ve been just satisfied if you said you don’t have the tool in front of you and you don’t just wanna say anything. I would’ve been totally fine with that. I help people a lot in my industry and talk to them and give them advice and small little diagnosis here and there and I don’t ask them for money. But I respect how you feel that is it. You’re right you don’t have the tool so you can’t really tell me what could be wrong, I was just hoping you’ve seen this problem in the past and thought oh maybe you’re missing this or that.

@@Thomasjcolbert82 "I would’ve been just satisfied if you said you don’t have the tool in front of you and you don’t just wanna say anything." But that's exactly what I said. I won't speculate without seeing the tool because that's how people give bad advice, and that's not fair to you. I could lead you to believe something that isn't correct and could cost you money, and that's not in either of our best interests. Please don't be sorry you asked, I'm glad you did and would rather say something you didn't like than not say anything at all and leave you hanging.

I've had good luck selling the Grey Pneumatic sets, but you can't beat the Astro pricing. It's a great option to have.

Just orange.